Re: [LegacyUG] Location Mapping
I just checked Ancestry.com mapping on the 1930 census. The map appears with the balloon; however, move it around a little and it disappears (the map, that is). Appears Legacy is not the only one with the problem. Kay - Original Message - From: "Brian L. Lightfoot" To: Sent: Tuesday, November 10, 2009 3:42 PM Subject: RE: [LegacyUG] Location Mapping Wow! The plot thickens. Things have definitely changed at BING. Now I am able to CRASH or LOCK-UP Legacy at will. Would others please try the following to see if this happens to you. I would suggest opening a test file and not your real database or else make sure you have a current backup. 1. Using either the menu or the blue triangle for an information window, get to the Master Location List. 2. Click on the GEO-CODE box at the top and select "Geo-code all un-resolved locations through Virtual Earth" (message to programmers: please change Virtual Earth to its current incarnation of BING.) 3. An error window will appear. You may click YES, NO, or QUIT. 4. It doesn't matter what you click because you'll be stuck in an endless loop of getting another error, OUT OF STACK SPACE. You might get lucky and get back to the first error window but you are still stuck. There is no way to close Legacy without closing the error window, which refuses to do so. You will have to terminate the LEGACY.EXE process using Windows Task Manager (CTRL-ALT-DEL) or just reboot. Seems as if BING changed the calls or parameters that needed to be passed to its interface and Legacy is stuck sending data using the old method which causes the lock-up or crash. Its not Legacy's fault because it used to work but as someone else already stated, "Microsoft moved the goalposts." Brian in CA -Original Message- From: Jim Terry/Support [mailto:jimte...@legacyfamilytree.com] Sent: Tuesday, November 10, 2009 12:31 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Location Mapping This is a new issue, probably occasioned by a change at Microsoft Bing Maps (formerly Virtual Earth). Brian has been logged it as issue number 0002956: "BING Interface No longer works to position map" and it has a high priority for the programmer's attention. The fix should appear in a free update to the Legacy program. I do not have a schedule for when that will happen. Please watch for it Thank you for choosing Legacy, Jim Terry Technical Support Legacy Family Tree Legacy Charting http://LegacyFamilyTree.com Phone: 425 788-0932 We are changing the world of genealogy! -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Evert van Dijken Sent: Tuesday, November 10, 2009 12:12 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Location Mapping I just discovered that clicking on the triangle after a location to Show the Master Location List does put a pin on the map but will only work once. It looks like the map doesn't refresh after changing to another location. Evert Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Fw: Mapping and IE8
Mine doesn't even work from the Master Location List. Kay - Original Message - From: "Evert van Dijken" To: Sent: Tuesday, November 10, 2009 8:22 AM Subject: Re: [LegacyUG] Fw: Mapping and IE8 Confirmed for GR 109 and Beta 110 It works ok from the Master Location List but if I click the Mapping icon nothing happen on the map. Evert 2009/11/10 Kay Fordham : Forgot to mention that my mapping worked fine until I recently upgraded from the July build to the current build. Did something happen with 7.0.0.109? Kay - Original Message ----- From: "Kay Fordham" To: "Legacy User Group" Sent: Monday, November 09, 2009 4:53 PM Subject: Mappint and IE8 Using build 7.0.0.109 - IE8 Vista My mapping no longer works. Per the archives someone reported the same problem; with IE8 XP; however, others did not seem to have a problem. When I use Map my Family, clicking a location on the list to the left does not go to that location. The map just sits there. Any suggestions? Thanks, Kay F Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Fw: Mapping and IE8
Forgot to mention that my mapping worked fine until I recently upgraded from the July build to the current build. Did something happen with 7.0.0.109? Kay - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Monday, November 09, 2009 4:53 PM Subject: Mappint and IE8 Using build 7.0.0.109 - IE8 Vista My mapping no longer works. Per the archives someone reported the same problem; with IE8 XP; however, others did not seem to have a problem. When I use Map my Family, clicking a location on the list to the left does not go to that location. The map just sits there. Any suggestions? Thanks, Kay F Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Mappint and IE8
Using build 7.0.0.109 - IE8 Vista My mapping no longer works. Per the archives someone reported the same problem; with IE8 XP; however, others did not seem to have a problem. When I use Map my Family, clicking a location on the list to the left does not go to that location. The map just sits there. Any suggestions? Thanks, Kay F Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Cal vs. Ber Issue - Legacy Programmers
Brian, All of my .trn language files are 10 July 2009. I obviously don't have the latest build(s). Was gone in July and the entire month of September so unsubscribed from the list. Will download the latest. Thanks, Kay - Original Message - From: "Brian/Support" To: Sent: Wednesday, November 04, 2009 5:55 AM Subject: Re: [LegacyUG] Cal vs. Ber Issue - Legacy Programmers Kay, The .trn file for French should use "calc.". That is what is in my version 109 file. When I switched from English (Canada) to French the FGS did use calc. in the report. Switching back to English changed the wording to Cal which used by all the English versions. Check the dates for the .trn files in your Legacy program folder. My date modified for the .trn files are 21 Aug 2009 for the Swedish and Spanish files and 13 Aug 2009 for all the other.trn files. Kay Fordham wrote: Brian, Thanks, using the reset button appears to work. However, I now see another problem. After resetting to English, I changed the language on a FGS to French. The screen shows "ber 10 August 1937". Ber is an abbreviation for the German word for calculated. - berechnet. The French word for calculated is calculé, so it should say cal, right? This is as far as I went with the experiement. Thanks, Kay - Original Message - From: "Brian/Support" To: Sent: Tuesday, November 03, 2009 1:30 PM Subject: Re: [LegacyUG] Cal vs. Ber Issue - Legacy Programmers Kay, The .trn files which are used for translating chart reports were fixed in August so they are included in the newest version. What you may be seeing however is a problem with the report.usr files. If you have the ber problem after changing languages use the reset button on the report screen to reset the .usr file for that report. I left the problem open so the programmers will address the problem of the .usr files not updating when you change languages. The German term should be ber however. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Kay Fordham wrote: Please fix the glitch reported below earlier in the year in the new Legacy update. This is a real problem for me as it is sometimes necessary to change language to French or German for oversees relatives. When I change back to English then I forever see Ber instead of Cal in all printed reports. As Brian stated ,"Once you change language however the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart style reports you create." Thank you, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Cal vs. Ber Issue - Legacy Programmers
Brian, Thanks, using the reset button appears to work. However, I now see another problem. After resetting to English, I changed the language on a FGS to French. The screen shows "ber 10 August 1937". Ber is an abbreviation for the German word for calculated. - berechnet. The French word for calculated is calculé, so it should say cal, right? This is as far as I went with the experiement. Thanks, Kay - Original Message - From: "Brian/Support" To: Sent: Tuesday, November 03, 2009 1:30 PM Subject: Re: [LegacyUG] Cal vs. Ber Issue - Legacy Programmers Kay, The .trn files which are used for translating chart reports were fixed in August so they are included in the newest version. What you may be seeing however is a problem with the report.usr files. If you have the ber problem after changing languages use the reset button on the report screen to reset the .usr file for that report. I left the problem open so the programmers will address the problem of the .usr files not updating when you change languages. The German term should be ber however. Brian Customer Support Millennia Corporation br...@legacyfamilytree.com http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Kay Fordham wrote: Please fix the glitch reported below earlier in the year in the new Legacy update. This is a real problem for me as it is sometimes necessary to change language to French or German for oversees relatives. When I change back to English then I forever see Ber instead of Cal in all printed reports. As Brian stated ,"Once you change language however the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart style reports you create." Thank you, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Read Receipt for Message
Hi William, I use Microsoft Outlook and have set my options not to notify me when a read receipt is requested, as well as never send a read receipt. I never see these notices. Don't know about Microsoft Outlook. Kay - Original Message - From: "William H. Boswell" To: "Legacy Family Tree List" Sent: Sunday, November 01, 2009 8:56 AM Subject: [LegacyUG] Read Receipt for Message I've noticed recently that a few users are using the option requesting a Read Receipt for their messages. While not a big problem, but unnecessary for a list such as this. Usually this is used solely for the purpose of business emails and should be turned off. I'm surprised nobody else has noticed or said anything unless it's because I'm using a very old version of Microsoft Outlook. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Cal vs. Ber Issue - Legacy Programmers
Please fix the glitch reported below earlier in the year in the new Legacy update. This is a real problem for me as it is sometimes necessary to change language to French or German for oversees relatives. When I change back to English then I forever see Ber instead of Cal in all printed reports. As Brian stated ,"Once you change language however the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart style reports you create." Thank you, Kay Fordham -- Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Brian/Support Tue, 28 Apr 2009 13:41:48 -0700 Kay, Problem confirmed. There is an error in the .trn files which control the chart type reports wording. I have submitted a problem report on the issue. You will only see the error if you change the report language. So long as you were using the default language you used to install Legacy the term is correct. Once you change language however the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart style reports you create. Kay Fordham wrote: Using 7.0.0.90 Build Date of: 13 March 2009 When I use the calendar feature to calculate a date (in this case birth), it shows properly as "cal 3 April 1849" in the Family View; however, in the print preview and printed copy it shows up as "ber 3 April 1849." No problem with the others; i.e., bef, abt, aft. Can anyone else duplicate this anomaly? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Search the Internet for Current Person
Hi Marilyn, I figured it out quite accidentally after I posted the query. I also replaced Alta Vista. Now I need to add Google. What a neat feature. Thanks for the response. Kay - Original Message - From: "Marilyn Clark" To: Sent: Monday, August 31, 2009 1:25 PM Subject: Re: [LegacyUG] Search the Internet for Current Person Go to a person in your Legacy file, then click on the globe "Internet" on the top menubar. Then click on "Search Internet for Current Person..." It opens a pop-up window where you can replace one of the 8 websites to choose from with Find A Grave. I used Alta Vista because I never use Alta Vista. Click on the button, "Customize Searches..." and it opens another pop-up window where you can Select one of the Internet Searches (I still used Alta Vista as my choice). This opens up yet another pop-up window called "Select an Internet Search." "[none]" will already be highlighted. At this juncture, click the "Add..." button. *Another* pop-up window will appear where you can name your new search (I named it "Find A Grave") and then you can finally paste that long URL into the first box. The second box already has []=[%20] in it so all I had to do then was "Save" and it was done. "Alta Vista" was replaced with "Find A Grave" on that first window, and it works great. BTW, the Alta Vista search string is still there in Legacy, apparently Legacy can only display 8 other websites at a time, to search from, in that very first pop-up window. Sorry if this is too simplistic, I'm kind of a detail nut... Marilyn --- On Mon, 8/31/09, Kay Fordham wrote: From: Kay Fordham Subject: Re: [LegacyUG] Search the Internet for Current Person To: LegacyUserGroup@legacyfamilytree.com Date: Monday, August 31, 2009, 9:38 AM Never having done this previously -- where do you enter the below string? Kay - Original Message - From: "Marilyn Clark" To: Sent: Monday, August 31, 2009 7:56 AM Subject: Re: [LegacyUG] Search the Internet for Current Person WOW! Very cool! I have never used this feature before. What a great family tree program. Thanks, Robert & Judy. Marilyn --- On Sun, 8/30/09, GeoSci wrote: > From: GeoSci > Subject: Re: [LegacyUG] Search the Internet for Current Person > To: LegacyUserGroup@legacyfamilytree.com > Date: Sunday, August 30, 2009, 11:20 PM > Less than 30 minutes - and a > SOLUTION!! Excellent! Thanks Robert - > worked perfectly!! > > Keith > > On Mon, Aug 31, 2009 at 12:15 AM, Robert Carneal > USA > wrote: > > This is working for me: > > http://www.findagrave.com/cgi-bin/fg.cgi?page=gsr&GSfn=[FirstName]&GSmn=&GSln=[Surname]&GSby=&GSbyrel=in&GSdy=&GSdyrel=in&GScntry=0&GSst=0&GSob=n > > (The above is all ONE line) > > > > In the second field, put this in: > > [ ]=[%20] > > > > Hope it works for you. > > > > Robert > > > > > > > > At 2009-08-30 10:51 PM, you wrote: > >> > >> Has anyone come up with a successful string to > search Find-A-Grave - > >> where the current person in Legacy is put into the > search boxes on > >> Find-A-Grave search? If so - may I please have > the string so that I > >> can set up such a search! > >> > >> Thanks > >> Keith > > > > > > > > Legacy User Group guidelines: > > > http://www.LegacyFamilyTree.com/Etiquette.asp > > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > > > > > > > > > -- Surnames: McKain, Horn, Riale, Ulrich, Erisman, Leiphart, > Reed and Henry > > Website: http://home.comcast.net/~geosci64 > EMail: geosc...@gmail.com > McCain-McKane-O'Kane DNA Group 1 > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.
Fw: [LegacyUG] Search the Internet for Current Person
Never mind - I figured it out. Thanks. - Original Message - From: "Kay Fordham" To: Sent: Monday, August 31, 2009 8:38 AM Subject: Re: [LegacyUG] Search the Internet for Current Person Never having done this previously -- where do you enter the below string? Kay - Original Message - From: "Marilyn Clark" To: Sent: Monday, August 31, 2009 7:56 AM Subject: Re: [LegacyUG] Search the Internet for Current Person WOW! Very cool! I have never used this feature before. What a great family tree program. Thanks, Robert & Judy. Marilyn --- On Sun, 8/30/09, GeoSci wrote: From: GeoSci Subject: Re: [LegacyUG] Search the Internet for Current Person To: LegacyUserGroup@legacyfamilytree.com Date: Sunday, August 30, 2009, 11:20 PM Less than 30 minutes - and a SOLUTION!! Excellent! Thanks Robert - worked perfectly!! Keith On Mon, Aug 31, 2009 at 12:15 AM, Robert Carneal USA wrote: > This is working for me: > http://www.findagrave.com/cgi-bin/fg.cgi?page=gsr&GSfn=[FirstName]&GSmn=&GSln=[Surname]&GSby=&GSbyrel=in&GSdy=&GSdyrel=in&GScntry=0&GSst=0&GSob=n > (The above is all ONE line) > > In the second field, put this in: > [ ]=[%20] > > Hope it works for you. > > Robert > > > > At 2009-08-30 10:51 PM, you wrote: >> >> Has anyone come up with a successful string to search Find-A-Grave - >> where the current person in Legacy is put into the search boxes on >> Find-A-Grave search? If so - may I please have the string so that I >> can set up such a search! >> >> Thanks >> Keith > >>> Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Search the Internet for Current Person
Never having done this previously -- where do you enter the below string? Kay - Original Message - From: "Marilyn Clark" To: Sent: Monday, August 31, 2009 7:56 AM Subject: Re: [LegacyUG] Search the Internet for Current Person WOW! Very cool! I have never used this feature before. What a great family tree program. Thanks, Robert & Judy. Marilyn --- On Sun, 8/30/09, GeoSci wrote: From: GeoSci Subject: Re: [LegacyUG] Search the Internet for Current Person To: LegacyUserGroup@legacyfamilytree.com Date: Sunday, August 30, 2009, 11:20 PM Less than 30 minutes - and a SOLUTION!! Excellent! Thanks Robert - worked perfectly!! Keith On Mon, Aug 31, 2009 at 12:15 AM, Robert Carneal USA wrote: > This is working for me: > http://www.findagrave.com/cgi-bin/fg.cgi?page=gsr&GSfn=[FirstName]&GSmn=&GSln=[Surname]&GSby=&GSbyrel=in&GSdy=&GSdyrel=in&GScntry=0&GSst=0&GSob=n > (The above is all ONE line) > > In the second field, put this in: > [ ]=[%20] > > Hope it works for you. > > Robert > > > > At 2009-08-30 10:51 PM, you wrote: >> >> Has anyone come up with a successful string to search Find-A-Grave - >> where the current person in Legacy is put into the search boxes on >> Find-A-Grave search? If so - may I please have the string so that I >> can set up such a search! >> >> Thanks >> Keith > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > -- Surnames: McKain, Horn, Riale, Ulrich, Erisman, Leiphart, Reed and Henry Website: http://home.comcast.net/~geosci64 EMail: geosc...@gmail.com McCain-McKane-O'Kane DNA Group 1 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Is er een mogelijkheid om de kinderen automatisch te sorteren bij invoegen. Als ik nu een rapport wil afdrukken staan de kinderen in willekeurige volgorde. Ik weet dat ik het achteraf k
Netty, I am sorry that I cannot respond in the Dutch language. It appears that you are saying that you can sort children after the fact but you want to know if Legacy will automatically sort children like the Dutch program Aldfaer. No, it will not. If children are entered in random order you must use the sort command to arrange them in birth order. Perhaps someone on the list has command of your language and can answer more efficiently. Kay Fordham - Original Message - From: "Netty de Wit" To: Sent: Friday, August 14, 2009 7:59 AM Subject: [LegacyUG] Is er een mogelijkheid om de kinderen automatisch te sorteren bij invoegen. Als ik nu een rapport wil afdrukken staan de kinderen in willekeurige volgorde. Ik weet dat ik het achteraf kan veranderen maar het zou prettig zijn als Legacy dat automatisch doet zoals bijv. bij Aldfaer. Dank Netty Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Calculated Date Terminology Error - Still Exists
Using 7.0.0.97, 10 July 2009 In April I reported an anomaly regarding using the calendar feature to calculate a date. It shows properly as "cal 3 April 1849" in the Family View; however, it shows "ber 3 April 1849" in the print preview and printed copy. Brian confirmed the problem and submitted a problem report on the issue. His explanation was "You will only see the error if you change the report language. So long as you were using the default language you used to install Legacy the term is correct. Once you change language, however, the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart styles you create. This bug was obviously not fixed in the last build. It is necessary for me to frequently create Family Group Sheets in German and French. Once this is done I then get ber rather than cal when switching back to the English language. This is a major problem for me. Any idea when this bug will be fixed? Thanks, Kay Fordham ( in sunny and hot Temecula, CA) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Draft cards explanation please
Helen, Here is a description for the WW I Draft Registration from Ancestry.com: "In 1917 and 1918, the United States held three registrations for the WWI draft. In the end, more than 24 million men born between 1873 and 1900 - some 25 percent of the U.S. population - registered for the draft, although not all were drafted. Handwritten by each individual, draft registration cards include the individual's name, address, date and place of birth, occupation, signature and more." As it states, not all who registered were drafted. These records have been an invaluable source for me in providing previously unknown birth dates. One series of the cards also asked for place of birth. They give occupation, employer, and location of employer. They provide next of kin, and sometimes this has produced a previously unknown spouse. Their address is proof of where they were living at the time. And finally, the physical description. Since these records were handwritten by the individual registering I have been able to correct family records regarding birth dates and places. Hope this helps. Kay - Original Message - From: To: Sent: Tuesday, June 02, 2009 1:32 PM Subject: [LegacyUG] Draft cards explanation please I've downloaded draft cards from Ancestry because (1) they are an additional piece of information about an ancestor and (2) they add to the background/personality of someone who could otherwise be just BMD dates and have added them to the collection of images for that person but ignored them otherwise. There are perhaps about 3-4 people in my 5000 plus database with these draft cards and now that I see the topic discussed, what is the point, purpose, meaning, etc. of these draft cards? I think that it involved compulsory? military service but when, why and how was the draft card created? Are they found only for USA ancestors? Helen in Canada Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology
Brian, I had indeed changed the FGS language to French a couple of weeks ago. Guess the problem manifested itself when I switched back to English (US). Thanks for checking this out. Kay - Original Message - From: "Brian/Support" To: Sent: Tuesday, April 28, 2009 1:13 PM Subject: Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Kay, Problem confirmed. There is an error in the .trn files which control the chart type reports wording. I have submitted a problem report on the issue. You will only see the error if you change the report language. So long as you were using the default language you used to install Legacy the term is correct. Once you change language however the error in the .trn file changes Legacy's term for Calculated from Cal to Ber in all the future chart style reports you create. Kay Fordham wrote: Using 7.0.0.90 Build Date of: 13 March 2009 When I use the calendar feature to calculate a date (in this case birth), it shows properly as "cal 3 April 1849" in the Family View; however, in the print preview and printed copy it shows up as "ber 3 April 1849." No problem with the others; i.e., bef, abt, aft. Can anyone else duplicate this anomaly? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology
John and Ron - When I first noticed the "ber" error I checked my language settings. The program option is set for English (US) and the report option is the same. I switched to each of the other two English settings but had the same results. If John has experienced this anomaly in any instance it would seem to me to be a bug of some kind. Kay Temecula, CA - Original Message - From: "John S. Adams" To: Sent: Tuesday, April 28, 2009 12:08 PM Subject: Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Ron, It appears you are right IF you have set the program language option to English (UK), i.e., "English English." However, try changing the language setting on the report screen to English (US). For me at least, this then causes "cal" to be displayed as "Ber." In other words, if the program option is set to one version of English, but the language option for a report is set for a different version, the "Ber" anomaly seems to appear. The same thing seems to happen with "abt" and "cir" for approximate dates. I guess this doesn't apply to Book Reports as I don't see anyplace to change the language settings for them. John S. Adams Hermosa Beach, CA -- From: "ronald ferguson" Sent: Tuesday, April 28, 2009 12:00 AM To: Subject: RE: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology John, I can assure you that in English English Cal is reproduced as Cal - at least on my set up. Ron Ferguson England Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology
Ron - Yes, I checked the Prefixes mentioned below. "Calculated" shows correctly as "cal." I'll try to investigate further later today to see if I may have done something weird that would affect the output. Thanks, Kay - Original Message - From: "ronald ferguson" To: Sent: Monday, April 27, 2009 9:05 AM Subject: RE: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Kay, I cannot see how it can be due to Legacy7 or we would all have the sme problem, and this one seems to be limited to your files. Have you checked the Prefixes in Options>Customise>Dates? Although if these were incorrect I would have expected them to affect all instances. Ron Ferguson _ From: kayhawo...@earthlink.net To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Date: Mon, 27 Apr 2009 08:13:51 -0700 Connie - The strange thing about this is that calculated dates show correctly as "cal 3 April 1849" on all reports except the FGS. Every individual with a calculated date shows "ber" instead of "cal" on the FGS. I've not seen this problem before Version 7. Not sure if it commenced with Version 7 or the newest build. Immediately did a check and repair and reboot - the glitch is still there. Thanks, Kay - Original Message - From: "Connie Sheets" To: Sent: Sunday, April 26, 2009 6:43 PM Subject: Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Kay, I'm using the same build as you, and on my one example entered since installing this build, it shows properly on Print Preview of an FGS as cal not ber (also a calculated birth). Connie Kay Fordham wrote: Using 7.0.0.90 Build Date of: 13 March 2009 When I use the calendar feature to calculate a date (in this case birth), it shows properly as "cal 3 April 1849" in the Family View; however, in the print preview and printed copy it shows up as "ber 3 April 1849." No problem with the others; i.e., bef, abt, aft. Can anyone else duplicate this anomaly? Thanks, Kay Fordham _ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology
Connie - The strange thing about this is that calculated dates show correctly as "cal 3 April 1849" on all reports except the FGS. Every individual with a calculated date shows "ber" instead of "cal" on the FGS. I've not seen this problem before Version 7. Not sure if it commenced with Version 7 or the newest build. Immediately did a check and repair and reboot - the glitch is still there. Thanks, Kay - Original Message - From: "Connie Sheets" To: Sent: Sunday, April 26, 2009 6:43 PM Subject: Re: [LegacyUG] Family Group Sheet Error - Calculated Date Terminology Kay, I'm using the same build as you, and on my one example entered since installing this build, it shows properly on Print Preview of an FGS as cal not ber (also a calculated birth). Connie Kay Fordham wrote: Using 7.0.0.90 Build Date of: 13 March 2009 When I use the calendar feature to calculate a date (in this case birth), it shows properly as "cal 3 April 1849" in the Family View; however, in the print preview and printed copy it shows up as "ber 3 April 1849." No problem with the others; i.e., bef, abt, aft. Can anyone else duplicate this anomaly? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Family Group Sheet Error - Calculated Date Terminology
Using 7.0.0.90 Build Date of: 13 March 2009 When I use the calendar feature to calculate a date (in this case birth), it shows properly as "cal 3 April 1849" in the Family View; however, in the print preview and printed copy it shows up as "ber 3 April 1849." No problem with the others; i.e., bef, abt, aft. Can anyone else duplicate this anomaly? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Question on Geo-Code
Using Legacy 7.0.0.90, Windows XP Per Sherry's advice (when I was having mapping issues) I used the geo-code all unresolved locations. This resolved the problem existing at that time. Now, in looking at my master location list I'm finding that perhaps 7 out of 10 locations are incorrect, even though all of the towns in my location list appear on the Google maps.. For instance, the balloon for Charlton, Massachusetts is NE of Marlborough -- a long ways from Charlton. Cedar Falls Iowa shows up on the town of Sinclair, Des Moines, Iowa shows up a long way from Des Moines, and on and on. I have been correcting this by right-clicking on the correct location and resetting to it. 1. Should I be arbitrarily resetting in this fashion? 2. Or should I be looking the location up on, say, USGS Earth Explorer, and manually changing the lat/long information? No. 1 will take a long time since there are hundreds of locations in my list. No. 2 would take a very long time. Is there something I should be doing in the process to eliminate all of the make-work? Thanks, Kay Fordham (sunny Temecula, CA) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Legacy Cruise
My husband and I have been on two Legacy Cruises: The Western Caribbean and the Baltic Capitals (last July). We booked the upcoming Mediterranean Cruise while on the ship in July. Christy Downing, the travel agent, is excellent and a joy to work with. Geoff Rasmussen's lectures are great. His lap top is hooked to a big screen so that the audience can follow along with what he is doing. He is superb teacher with a great sense of humor. The entire Legacy Staff is very friendly and outgoing and we enjoyed their company. Kay Fordham At 2009-04-13 04:16 PM, you wrote: I am interested in the Legacy Cruise to the Mediterranean. I would appreciate hearing from people who have previously been on a Legacy Cruise. What they thought of it? How was the travel agency that handles the bookings? What were the lectures like? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Problem with Mapping
Yes, I did that upon discovery of the problem. Kay - Original Message - From: "Sherry/Support" To: Sent: Tuesday, March 31, 2009 10:28 AM Subject: RE: [LegacyUG] Problem with Mapping Did you run a File > File Maintenance > Check/Repair on the file? Thanks for using Legacy. Sherry Customer Support Millennia Corporation supp...@legacyfamilytree.com http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Kay Fordham Sent: Tuesday, March 31, 2009 9:06 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Problem with Mapping Hi Sherry, As it turns out the balloons are in the right place for those that I have viewed (except for Boston, Suffolk County, MA, showing up in Suffolk, England - your advise of not entering the county will fix this). However, the events associated with them are mismatched This happens if there is even one ? in the location list in the left-hand box. I just sent a message to the list detailing the problem. All those that I viewed are current locations. I'll take the steps you outlined below. Thanks! Kay - Original Message - From: "Sherry/Support" To: Sent: Tuesday, March 31, 2009 8:19 AM Subject: RE: [LegacyUG] Problem with Mapping Kay, In the Master Location List, click on the Geo-code button and select "Geo-code all unresolved locations" If you're still seeing some strays, highlight the errant location, click on the Geo-code button and select "Geo-code current location" I can tell you that I've seen VE will misplace some locations. It seems to want to put my town of Mexico, Missouri somewhere in Mexico. Plus it has no idea where historical locations are so if your towns no longer exist, you'll have to estimate the location and set the pin there. On the map in the Master Location List, with the location highlighted in the list, right click on the spot where the location should be. That will set the coordinates to the correct place. Best done when zoomed in close on the map. Also, you may have to enter a location without a county to set it correctly, then after it's set, edit the location again to include the county Thanks for using Legacy. Sherry Customer Support Millennia Corporation supp...@legacyfamilytree.com http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Problem with Mapping
Hi Sherry, As it turns out the balloons are in the right place for those that I have viewed (except for Boston, Suffolk County, MA, showing up in Suffolk, England - your advise of not entering the county will fix this). However, the events associated with them are mismatched This happens if there is even one ? in the location list in the left-hand box. I just sent a message to the list detailing the problem. All those that I viewed are current locations. I'll take the steps you outlined below. Thanks! Kay - Original Message - From: "Sherry/Support" To: Sent: Tuesday, March 31, 2009 8:19 AM Subject: RE: [LegacyUG] Problem with Mapping Kay, In the Master Location List, click on the Geo-code button and select "Geo-code all unresolved locations" If you're still seeing some strays, highlight the errant location, click on the Geo-code button and select "Geo-code current location" I can tell you that I've seen VE will misplace some locations. It seems to want to put my town of Mexico, Missouri somewhere in Mexico. Plus it has no idea where historical locations are so if your towns no longer exist, you'll have to estimate the location and set the pin there. On the map in the Master Location List, with the location highlighted in the list, right click on the spot where the location should be. That will set the coordinates to the correct place. Best done when zoomed in close on the map. Also, you may have to enter a location without a county to set it correctly, then after it's set, edit the location again to include the county Thanks for using Legacy. Sherry Customer Support Millennia Corporation supp...@legacyfamilytree.com http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Kay Fordham Sent: Monday, March 30, 2009 3:21 PM To: Legacy User Group Subject: [LegacyUG] Problem with Mapping Legacy 7.0.0.90 Deluxe Version - Windows XP Haven't paid much attention to the mapping aspect until today. "Many" of the locations in my locations list come up in the wrong (really wrong) places on the map. For example, Phoenix, Maricopa County Arizona shows up in Oshkosh, Winnebago County, Wisconsin. Oshkosh shows up in Marshfield, Wood County, Wisconsin. Kekoskee, Dodge County, Wisconsin shows up in Pierre, South Dakota. And on and on and on. Do I have a broken database? According to the Users' Archives, one can move the push pin on the map. I've not figured out how to do this - it won't drag and drop. Guess I need to get the video. Any suggestions? Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Fw: Problem with Mapping - Follow-up
Folks - My issue is not about which part of the balloon points where. I am very familiar with Microsoft VirtualEarth and use it regularly.. I am well aware of how to resolve the coordinates. The problem is that while using the Map my Family feature, many of the locations listed in the box on the left-hand side of the screen had the balloons placed hundreds of miles from the actual location. This occurred with some families and not with others. The fact that hundreds of locations were affected told me something was amiss. Jack Earnshaw's response (see below) caused me to take another look at some of the families - and he hit the nail on the head regarding unresolved locations. All it takes is one location with a ? and some of the other locations are adversely affected. For example I am now looking at a family with 16 locations in the left-hand box. The top location has a ? in the Lat column. When I highlight Milwaukee, Wisconsin in the box the active balloon is on Hot Springs, South Dakota. Mousing over the balloon brings up the Milwaukee location with residence date. The active balloon for Hot Springs, SD, is in New York. The active balloon for Brooklyn, Windham County, Connecticut is in the middle of South Dakota. Again mousing over it brings up Brooklyn and a 1847 marriage. I don't believe this is a Microsoft problem since the balloons are all placed properly at locations listed in the left-hand box. It would appear that Legacy is assigning the family events to the wrong places when Microsoft is unable to verify one or more of the locations. I now know how to rectify this situation. Thanks, Jack, for helping me resolve the issue. And, thanks to the others who have responded. Kay "I reported this as a bug some time ago but got back the "unable to reproduce the problem" answer. What I was finding was that choosing an individual and then clicking the Mapping button brought up the correct list of locations and then it tried to resolve on the map all those places that hadn't yet been resolved. This is where it went wrong. The places it picked all were within the list of locations on the left, BUT the coordinates and balloon were allocated to the wrong place. E.g. if there were 4 locations A, B, C and D and that B, C and D had not been "resolved" before i.e. placed on the map then it seemed to place location B at the point on the map for location C, similarly for location C it might go to the place on the map for location D. This didn't always happen, but very frequently. Now I try to ensure that the places have been resolved properly before I go to mapping. But I will always go down the list to make sure that the locations are shown at the correct place on the map. Going to the location list and getting places resolved that way seems to be OK, it is only when this occurs "on the fly" by using the Mapping button" - Original Message - From: "Mike Fry" To: Sent: Tuesday, March 31, 2009 4:05 AM Subject: Re: [LegacyUG] Fw: Problem with Mapping - Follow-up Bert van Kootwijk wrote: One of the reasons can be that the programmers in their wisdom had decided that the center of the balloon indicates the correct spot. As the balloon has a point people think that the point of the balloon points to the correct spot. That is normal behaviour, I think. I complained many times about this problem. As far as I know the staff and programmers donot think it is worth to change the indicated spot from the center of the balloon to the point of the pin. In my opinion this is a very major bug, but they think else. Er no, Bert! That's a Microsoft VirtualEarth bug! All the API allows the programmers to do is say they want a balloon at a specific point on the map. VitualEarth actually displays the balloon in what it thinks is the correct position on the map. The points are based on latitude and longitude co-ordinates in the Legacy Location list entries. I would suggest that Kay checks that her co-ordinates are correct before lambasting the program. -- Regards, Mike Fry Johannesburg. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Fw: Problem with Mapping - Follow-up Again
While mapping my family in South Dakota, there is a push pin over somewhere they never resided (even with the zoom feature). Mousing over it shows Scituate, Massachusetts - Estate: Ida Mary Spencer 1927. Ida Mary never had an estate in Massachusetts and never lived there. This estate belongs to her father's half-sister Clara Simmons. Going off line now. Hopefully someone can come up with an idea as to what is wrong - other than a wonky database. Kay - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Monday, March 30, 2009 5:09 PM Subject: Fw: Problem with Mapping - Follow-up In addition to the problems noted below, there is a BIG problem with the map my family feature. For instance, when I mouse over the balloons the one in Massachusetts shows Fall River, South Dakota. The one in Fall River shows Milwaukee, Wisconsin, the one in St. Paul, Minnesota shows St. Charles, Illinois. I have done check and repair. HELP. Kay - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Monday, March 30, 2009 3:21 PM Subject: Problem with Mapping Legacy 7.0.0.90 Deluxe Version - Windows XP Haven't paid much attention to the mapping aspect until today. "Many" of the locations in my locations list come up in the wrong (really wrong) places on the map. For example, Phoenix, Maricopa County Arizona shows up in Oshkosh, Winnebago County, Wisconsin. Oshkosh shows up in Marshfield, Wood County, Wisconsin. Kekoskee, Dodge County, Wisconsin shows up in Pierre, South Dakota. And on and on and on. Do I have a broken database? According to the Users' Archives, one can move the push pin on the map. I've not figured out how to do this - it won't drag and drop. Guess I need to get the video. Any suggestions? Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Problem with Mapping
Ron, I just tried the Map my Family from family view. Things are even worse. Mousing over the balloons shows that the one in Massachusetts shows Fall River, South Dakota. The one in Fall River shows Milwaukee, Wisconsin, the one in St. Paul, Minnesota shows St. Charles, Illinois. I have done check and repair. All of these are modern locations and all show up in the U.S. Geological Survey Maps. I have already sent a message to the list about the latest anomaly. Thanks for your feedback. Kay - Original Message - From: "ronald ferguson" To: Sent: Monday, March 30, 2009 5:00 PM Subject: RE: [LegacyUG] Problem with Mapping Kay, Apart from saying that the lower the zoom the more inaccurate the the position of the pin looks, I am not going to go into this aspect further at the moment. The first thing is for you to be able to use it. If you start with an individual in, say Family View, and click the Mapping Icon then the program will automatically try to put the pins into the locations associated with this person. This can be quite inaccurate and it should be noted that it only reconises modern locations, The next thing to note is that one cannot move the pins and it is necessary to move the map, and then put your curser in the correct place and right click. But this cannot be done in the screen displayed when you click the mapping icon; you need to click "Resolve". This takes you to the same screen as View>Master Lists>Location and here you can move the map and set the location as described above. Using the zoom in and zoom out helps to manipulate the maps. The help Files give details of the meaning of the lettering of the column headers. Ron Ferguson _ *New Tutorial* Create Standards Compliant CSS Pedigree web pages http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: kayhawo...@earthlink.net To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Problem with Mapping Date: Mon, 30 Mar 2009 15:21:20 -0700 Legacy 7.0.0.90 Deluxe Version - Windows XP Haven't paid much attention to the mapping aspect until today. "Many" of the locations in my locations list come up in the wrong (really wrong) places on the map. For example, Phoenix, Maricopa County Arizona shows up in Oshkosh, Winnebago County, Wisconsin. Oshkosh shows up in Marshfield, Wood County, Wisconsin. Kekoskee, Dodge County, Wisconsin shows up in Pierre, South Dakota. And on and on and on. Do I have a broken database? According to the Users' Archives, one can move the push pin on the map. I've not figured out how to do this - it won't drag and drop. Guess I need to get the video. Any suggestions? Thanks, Kay _ Free photo editing software from Windows Live . Try it now! http://clk.atdmt.com/UKM/go/134665240/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Fw: Problem with Mapping - Follow-up
In addition to the problems noted below, there is a BIG problem with the map my family feature. For instance, when I mouse over the balloons the one in Massachusetts shows Fall River, South Dakota. The one in Fall River shows Milwaukee, Wisconsin, the one in St. Paul, Minnesota shows St. Charles, Illinois. I have done check and repair. HELP. Kay - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Monday, March 30, 2009 3:21 PM Subject: Problem with Mapping Legacy 7.0.0.90 Deluxe Version - Windows XP Haven't paid much attention to the mapping aspect until today. "Many" of the locations in my locations list come up in the wrong (really wrong) places on the map. For example, Phoenix, Maricopa County Arizona shows up in Oshkosh, Winnebago County, Wisconsin. Oshkosh shows up in Marshfield, Wood County, Wisconsin. Kekoskee, Dodge County, Wisconsin shows up in Pierre, South Dakota. And on and on and on. Do I have a broken database? According to the Users' Archives, one can move the push pin on the map. I've not figured out how to do this - it won't drag and drop. Guess I need to get the video. Any suggestions? Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Problem with Mapping
Legacy 7.0.0.90 Deluxe Version - Windows XP Haven't paid much attention to the mapping aspect until today. "Many" of the locations in my locations list come up in the wrong (really wrong) places on the map. For example, Phoenix, Maricopa County Arizona shows up in Oshkosh, Winnebago County, Wisconsin. Oshkosh shows up in Marshfield, Wood County, Wisconsin. Kekoskee, Dodge County, Wisconsin shows up in Pierre, South Dakota. And on and on and on. Do I have a broken database? According to the Users' Archives, one can move the push pin on the map. I've not figured out how to do this - it won't drag and drop. Guess I need to get the video. Any suggestions? Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Double Dates
Rich, My French records are only for certain lines. They come from Catholic parish registers and civil registers, neither of which used double dating. My early German parish registers (protestant) did not use double dating either. I do need double dating for my early New Englanders and may likely need the feature for other lines in the future. Guess I'll have to accept the doubles when not needed as you stated below. This issue would likely cause problems for many users but I saw only a couple of posts in the archives. Thanks for your feedback. Kay - Original Message - From: "RICHARD SCHULTHIES" To: Sent: Thursday, March 26, 2009 3:35 PM Subject: Re: [LegacyUG] Double Dates Will you have 100% French dates, or will there be British and/or Protestant European also. Only if you have 100% will it matter. I have found that to include the Scandinavian alphabet characters with them in correct order, I changed the underlying language to Swedish, though I never print in that language. This seems to have brought in other changes, which I accepted. You might consider switching to a 'Catholic' language which would never need the double dating. But I have both so must accept the doubles when not needed. Rich in LA CA --- On Thu, 3/26/09, Kay Fordham wrote: From: Kay Fordham Subject: [LegacyUG] Double Dates To: "Legacy User Group" Date: Thursday, March 26, 2009, 2:52 PM I am inputting many early French records from 1600s through 1800s. They did not use double dating. If I turn the option off, all records are changed, including those which require double dating. Is there a way to manually turn off the option for selected records? Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Problem with IGI Search
To recap: As of Yesterday: The FamilySearch Account Screen did not appear automatically. Clicking Options resulted only in a pop-up box with the option of ticking or unticking "assign sources when saving changes." No access to the account screen. I don't need to set up an account, but the system appears not to be working on my machine. My first search had matches but the "view matches" box was grayed out. Other searches worked just fine. As of Today: Clicking the Search IGI link freezes the program and it is necessary to shut it down. All other searches and functions work properly. I've done all the maintenance. Any suggestions? Thanks to all that responded to my post yesterday.. Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Fw: Problem with IGI Search
I just tried my search on another individual and it worked - able to view sources. Not sure what the problem was with the initial search. Thanks, Kay - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Sunday, February 22, 2009 11:21 AM Subject: Problem with IGI Search Using Legacy 7.0.0.86 - Windows XP I tried the IGI Search option for the first time today. o The Help File states "If you are using this feature for the first time, or if you are on a public computer . . . , the FamilySearch Account Settings screen appears." It does not appear. o The Help File for the FamilySearch Account Settings states it is reached by choosing Options > FamilySearch Account Settings from the IGI Search screen. Clicking Options results only in a pop-up box with the option of ticking or unticking "assign sources when saving changes." o I'm able to perform a successful search; however, the "View Matches" box is grayed out, likely because I have no account. What am I doing wrong? Thanks, Kay Fordham (Temecula, CA) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Problem with IGI Search
Using Legacy 7.0.0.86 - Windows XP I tried the IGI Search option for the first time today. o The Help File states "If you are using this feature for the first time, or if you are on a public computer . . . , the FamilySearch Account Settings screen appears." It does not appear. o The Help File for the FamilySearch Account Settings states it is reached by choosing Options > FamilySearch Account Settings from the IGI Search screen. Clicking Options results only in a pop-up box with the option of ticking or unticking "assign sources when saving changes." o I'm able to perform a successful search; however, the "View Matches" box is grayed out, likely because I have no account. What am I doing wrong? Thanks, Kay Fordham (Temecula, CA) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Re: Help Please on Source Template Overrides
Jenny I should have put the issue aside when tired and frustrated. I had problems with the overrides one time and not the next, and was not able to efficiently analyze what was going wrong. Will have a go at it today with a clear mind. Thanks for your helpful feedback and hope you feel better soon. Kay Jenny Wrote: My brain's a bit fuzzy at the moment (combination of heavy cold and cold cures!) but I think I have worked through this correctly: Working in the Source Detail screen, if you enter the Details on the first tab, then click the Override tab there will be nothing entered in the boxes, but if you click on "click here to go to the overrides tab" the boxes will have the citations entered ready for you to edit. If you copy a Source which has overrides to the Source Clipboard, then paste it, it will paste with the overrides included and the checkbox ticked for using that override. If you make changes to the Source Detail and then want to incorporate these into an Override, you need to make your Detail changes, then click "the output has been overridden by the user. Click here ..." and then re-write your override sentence, not just change the bits you have changed on the details screen. I hope that makes sense! -- Jenny M Benson *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Help Please on Source Template Overrides
I'm seeing another problem that may have compounded my confusion previously. I just copied the below-mentioned source to the clipboard, then applied it to another individual. The detail screen then popped up and I changed the information as appropriate for the new individual and saved it. The Output Preview still shows the details for the original Detail Screen - not the change made. Is anyone else having this problem? Doesn't seem feasible that I would need to do an override on the detail screen rather than just change data and save it. Or is this the way it works? Kay - Original Message - From: "Kay Fordham" <[EMAIL PROTECTED]> To: Sent: Tuesday, December 02, 2008 1:54 PM Subject: Re: [LegacyUG] Help Please on Source Template Overrides Jenny Benson wrote: Are you entering the page #, volume # etc in the Source Details screen and using the Override there? If so, are you remembering to check the box for "Use this customised Footnote on reports"? Yes - however, if I went back in to make another change I may have started at the Master Source screen and then moved to the Detail screen. This may have been the problem. I was getting some squirrelly results at times. From now on I will be careful to start from the Detail screen only when making changes there. Thank you Jenny for your help. Kay - Original Message - From: "Jenny M Benson" <[EMAIL PROTECTED]> To: Sent: Tuesday, December 02, 2008 12:56 PM Subject: Re: [LegacyUG] Help Please on Source Template Overrides Kay Fordham wrote I create the master source and save. I need to insert volume # and issue # in addition to the page #. I need the information in this order (largest to smallest). I input (in page block) vol. 1, issue 10, p. 3 and save. The Output Preview shows: p. vol. 2, issue 10, p. 3. I hit the override button and prefill the Footnote/Endnote block. I delete the "p." before vol. 2, issue 10, p.3 and save. The Output Preview still shows p. vol. 2, issue 10, p.3. Are you entering the page #, volume # etc in the Source Details screen and using the Override there? If so, are you remembering to check the box for "Use this customised Footnote on reports"? That works perfectly for me. BUT, I see that if you use the Override tab on the Master Source screen, this is ignored when you add data to the Source Details screen. I think this might be a bug. -- Jenny M Benson *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Help Please on Source Template Overrides
Jenny Benson wrote: Are you entering the page #, volume # etc in the Source Details screen and using the Override there? If so, are you remembering to check the box for "Use this customised Footnote on reports"? Yes - however, if I went back in to make another change I may have started at the Master Source screen and then moved to the Detail screen. This may have been the problem. I was getting some squirrelly results at times. From now on I will be careful to start from the Detail screen only when making changes there. Thank you Jenny for your help. Kay - Original Message - From: "Jenny M Benson" <[EMAIL PROTECTED]> To: Sent: Tuesday, December 02, 2008 12:56 PM Subject: Re: [LegacyUG] Help Please on Source Template Overrides Kay Fordham wrote I create the master source and save. I need to insert volume # and issue # in addition to the page #. I need the information in this order (largest to smallest). I input (in page block) vol. 1, issue 10, p. 3 and save. The Output Preview shows: p. vol. 2, issue 10, p. 3. I hit the override button and prefill the Footnote/Endnote block. I delete the "p." before vol. 2, issue 10, p.3 and save. The Output Preview still shows p. vol. 2, issue 10, p.3. Are you entering the page #, volume # etc in the Source Details screen and using the Override there? If so, are you remembering to check the box for "Use this customised Footnote on reports"? That works perfectly for me. BUT, I see that if you use the Override tab on the Master Source screen, this is ignored when you add data to the Source Details screen. I think this might be a bug. -- Jenny M Benson *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Help Please on Source Template Overrides
Using 7.0.0.76 I've spent another half day trying to figure out the override protocol. Never had a problem with Legacy 6. Can someone please give me a heads up on what I am doing wrong? I'm using Newspapers - online - by unrelated content provider. I create the master source and save. I need to insert volume # and issue # in addition to the page #. I need the information in this order (largest to smallest). I input (in page block) vol. 1, issue 10, p. 3 and save. The Output Preview shows: p. vol. 2, issue 10, p. 3. I hit the override button and prefill the Footnote/Endnote block. I delete the "p." before vol. 2, issue 10, p.3 and save. The Output Preview still shows p. vol. 2, issue 10, p.3. Yes, I can resolve the problem by entering the page number first and then volume and issue, but this is not the way it should be. I've not been successful in performing overrides for other sources either. I'm following what little information is contained in the Manual and Help File, unless I'm misinterpreting something.. Thank you! Kay Fordham *** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit http://tinyurl.com/65rpbt. *** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Problem with Source Overrides
Using Version 7.0.0.76 I think I need a brain transplant. I just can't capture the sequence of the source overrides. Example: I used the books, author known, basic format. I fill out the master source template and then modify the contents using the override and save. It is easier to do this and modify rather than enter all from scratch. I don't continue to the detail at this point because there are multiple people listed in this book and each is done on an individual basis. When I use "cite a master source" and fill in the detail and save, the detail information does not show in the output preview or anywhere else. Can some kind soul explain the step-by-step instructions for overriding? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Viewing Source Detail Screens
Thanks, Ron. After I create sources that I wish to refer to I tag one of each type and print a listing so that I can see both source and detail. Eventually, I guess, I'll have most of them. Kay - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Monday, December 01, 2008 1:28 PM Subject: RE: [LegacyUG] Viewing Source Detail Screens Kay, I don't know of one and I do something similar to you before using any of the Source Writer Sources.Ron Ferguson Subject: [LegacyUG] Viewing Source Detail Screens> Date: Mon, 1 Dec 2008 12:12:59 -0800> > Using 7.0.0.76> > When selecting a source template that I haven't previously used, I can't see > what is included in the detail screen until I fill out and save the master > source. I've wasted time completing the master source only to find that the > detail screen won't work for the purpose. I've taken to simply entering an > "x" in the master source and saving to view the detail. Still have to > delete the source if I choose not to use it. Is there any way to view the > attendant detail screen prior to filling out and saving the master source?> > Another Elizabeth Shown Mills quote: "The devil is in the detail."> > Thanks,> Kay > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Viewing Source Detail Screens
Using 7.0.0.76 When selecting a source template that I haven't previously used, I can't see what is included in the detail screen until I fill out and save the master source. I've wasted time completing the master source only to find that the detail screen won't work for the purpose. I've taken to simply entering an "x" in the master source and saving to view the detail. Still have to delete the source if I choose not to use it. Is there any way to view the attendant detail screen prior to filling out and saving the master source? Another Elizabeth Shown Mills quote: "The devil is in the detail." Thanks, Kay Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Problem with Source Printout
Ron - Congratulations - you just resolved my problem. Looked at source settings and found the "If an event has multiple citations, combine them into one paragraph" was checked (must be the default setting). Undid that and no more problem (at least it is a problem to me). BTW it was printing previously the way I described in all reports. Thanks, Kay - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Sunday, November 30, 2008 2:14 PM Subject: RE: [LegacyUG] Problem with Source Printout Kay, What are your Source Settings, and are you only talking about the Family Group Sheet?Ron Ferguson _ *New Tutorial* Publish your Web Pages - Blogshttp://www.fergys.co.uk View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: [EMAIL PROTECTED]> To: LegacyUserGroup@legacyfamilytree.com> Subject: [LegacyUG] Problem with Source Printout> Date: Sun, 30 Nov 2008 14:06:01 -0800> > Using the most current release downloaded today.> > I have two sources for an individual as follows (footnote/endnote citation > copied here only). Number 1 was done with the Private Artifact Template. > Number 2 was done with the Newspaper, online, by publisher Template.> > 1. Lee Dean Alden, Memorial Card, 27 November 2007; privately held by Kay > Fordham [ADDRESS FOR PRIVATE USE], Temecula, California.2008. Received from > Mary Alden Hagen of Madison, South Dakota.> > 2. Lee Dean Alden obituary," The Lemmon Leader, 2 December 2007, online > archives; also published 27 November 2007 in the Belle Fourche (South > Dakota) Post & Bee> > The Number 1 Source Citation printout is garbled as follows: [it combines > both sources]> > 1. Lee Dean Alden, Memorial Card, 27 November 2007; privately held by Kay > Fordham, [ADDRESS FOR PRIVATE USE], Temecula, California, 2008. Received > from Mary Alden Hagen of Madison, South Dakota . . . . "Lee Dean Alden > obituary," The Lemmon Leader, 2 December 2007, online archives; also > published 27 November 2007 in the Belle Fourche (South Dakota) Post & Bee> > The Number 2 Source Citation prints as it should in the Source Citation > section of the Family Group Sheet; however, it is only included with the > obituary event even though it is also attached to birth, death, burial, > marriage.> > The last statement in Number 1 (Received from Mary Alden Hagen of Madison, > South Dakota) was added as a master source comment. Deleting it makes no > difference. The last statement in Number 2 (also published 27 November 2007 > in the Belle Fourche (South Dakota) Post & Bee" was added as a Detail > Comment..> > Both sources show correctly in the Output section of the assigned sources > page.> > Have done check & repair, exited Legacy and reentered - nothing changes.> > Has anyone had this problem?> > Thanks,> Kay Fordham > _ See the most popular videos on the web http://clk.atdmt.com/GBL/go/115454061/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Problem with Source Printout
Using the most current release downloaded today. I have two sources for an individual as follows (footnote/endnote citation copied here only). Number 1 was done with the Private Artifact Template. Number 2 was done with the Newspaper, online, by publisher Template. 1. Lee Dean Alden, Memorial Card, 27 November 2007; privately held by Kay Fordham [ADDRESS FOR PRIVATE USE], Temecula, California.2008. Received from Mary Alden Hagen of Madison, South Dakota. 2. Lee Dean Alden obituary," The Lemmon Leader, 2 December 2007, online archives; also published 27 November 2007 in the Belle Fourche (South Dakota) Post & Bee The Number 1 Source Citation printout is garbled as follows: [it combines both sources] 1. Lee Dean Alden, Memorial Card, 27 November 2007; privately held by Kay Fordham, [ADDRESS FOR PRIVATE USE], Temecula, California, 2008. Received from Mary Alden Hagen of Madison, South Dakota . . . . "Lee Dean Alden obituary," The Lemmon Leader, 2 December 2007, online archives; also published 27 November 2007 in the Belle Fourche (South Dakota) Post & Bee The Number 2 Source Citation prints as it should in the Source Citation section of the Family Group Sheet; however, it is only included with the obituary event even though it is also attached to birth, death, burial, marriage. The last statement in Number 1 (Received from Mary Alden Hagen of Madison, South Dakota) was added as a master source comment. Deleting it makes no difference. The last statement in Number 2 (also published 27 November 2007 in the Belle Fourche (South Dakota) Post & Bee" was added as a Detail Comment.. Both sources show correctly in the Output section of the assigned sources page. Have done check & repair, exited Legacy and reentered - nothing changes. Has anyone had this problem? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Template for Book Question
Ron, I generally work from family group sheets when doing research. When other researchers request information it is the family group sheet that I provide. Hence, I like to see the citation show where I located the material. However, thanks for letting me know about the Ancestor Report Footnotes. I will eventually be printing these reports. Kay - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 26, 2008 5:28 PM Subject: RE: [LegacyUG] Source Template for Book Question Kay, Repositories do print in Sources, at least in the Ancestor Report footnotes. They need to be set in Options>Customise>Sources. Ron Ferguson _ *New Tutorial* Publish your Web Pages - Blogs http://www.fergys.co.uk View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Source Template for Book Question Date: Wed, 26 Nov 2008 16:41:44 -0800 Steve, I have been using the "Book> Editor known> Basic Format" convention you mention below for lack of anything better. Since the repository won't print in the citation (as least I don't believe it will) I like your idea of the mention in the Comments (ticked to print in the citation). Thanks! Kay - Original Message - From: "Steve Voght" To: Sent: Wednesday, November 26, 2008 4:23 PM Subject: Re: [LegacyUG] Source Template for Book Question I ran into this same problem, and decided the best choice was to consider such books as "Book> Editor known> Basic Format" and provide Google Books as the repository (if you don't use the repository feature, then mention in the Text/Comments where you found it.) The rationale being that you're looking at an exact digital image of the original book (including all the relevant publication information) it's not any different than having a hard copy of that edition in your own hands and looking at it. To me, the "online publication only" book category is worthless -- it's not clear what would differentiate a "web book" from a "website" or other more specific web-based category, especially since it runs into all the usual problems like getting updated, revised, taken offline, etc. Cheers, Steve - Original Message - From: "Kay Fordham" To: "Legacy User Group" Sent: Wednesday, November 26, 2008 2:22 PM Subject: [LegacyUG] Source Template for Book Question I've been unable to locate a template for, say, a book with editor known (original edition) and digitized online at Google Books. The only online for this scenario is for online publication only (no hard copies printed). Can someone point me in the right direction? Thanks Kay Fordham Researching Albrecht, Alden, Baker, DeLoye, DuBois, Fadden, Hanno, Immel, Kelly, Meves, Roberts, Seel, Spencer, Seeton, Stoddart/Stoddard _ See the most popular videos on the web http://clk.atdmt.com/GBL/go/115454061/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Template for Book Question
Kristin - I agree with your feedback below. I just thought I was missing something in the plethora of templates available. Believe the programmers should gin up a suitable template to accommodate the online images of books originally published in paper copy. Thanks - Kay - Original Message - From: "Kirsten Bowman" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 26, 2008 5:22 PM Subject: RE: [LegacyUG] Source Template for Book Question Kay and Elizabeth: This is really a semantics thing. The philosophy is that (1) Things on the Internet are considered published and (2) *Repositories* are not properly cited for published materials because they are usually widely available. That's why Legacy doesn't print a repository if you identify a book as published. On the other hand you *do* want to identify where you found the data and the format it was in. So the simple solution is to use the template Book > Authored > Author Known > Basic Format, and then to put in the Detail Comments section the medium, site name, and URL. This produces a properly formatted footnote/endnote citation, subsequent citation, and bibliography. Much citation protocol is really not dictated by Mills, but is simply established publishing procedure. Kirsten -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Elizabeth Richardson Sent: Wednesday, November 26, 2008 3:34 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Source Template for Book Question Why would it not be the format for any other book and the repository be Google? Elizabeth researching the descendants of William and Sarah (Patterson) Thompson ----- Original Message - From: "Kay Fordham" <[EMAIL PROTECTED]> To: "Legacy User Group" Sent: Wednesday, November 26, 2008 2:22 PM Subject: [LegacyUG] Source Template for Book Question I've been unable to locate a template for, say, a book with editor known (original edition) and digitized online at Google Books. The only online for this scenario is for online publication only (no hard copies printed). Can someone point me in the right direction? Thanks Kay Fordham Researching Albrecht, Alden, Baker, DeLoye, DuBois, Fadden, Hanno, Immel, Kelly, Meves, Roberts, Seel, Spencer, Seeton, Stoddart/Stoddard Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Template for Book Question
Steve, I have been using the "Book > Editor known > Basic Format" convention you mention below for lack of anything better. Since the repository won't print in the citation (as least I don't believe it will) I like your idea of the mention in the Comments (ticked to print in the citation). Thanks! Kay - Original Message - From: "Steve Voght" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 26, 2008 4:23 PM Subject: Re: [LegacyUG] Source Template for Book Question I ran into this same problem, and decided the best choice was to consider such books as "Book > Editor known > Basic Format" and provide Google Books as the repository (if you don't use the repository feature, then mention in the Text/Comments where you found it.) The rationale being that you're looking at an exact digital image of the original book (including all the relevant publication information) it's not any different than having a hard copy of that edition in your own hands and looking at it. To me, the "online publication only" book category is worthless -- it's not clear what would differentiate a "web book" from a "website" or other more specific web-based category, especially since it runs into all the usual problems like getting updated, revised, taken offline, etc. Cheers, Steve - Original Message - From: "Kay Fordham" <[EMAIL PROTECTED]> To: "Legacy User Group" Sent: Wednesday, November 26, 2008 2:22 PM Subject: [LegacyUG] Source Template for Book Question I've been unable to locate a template for, say, a book with editor known (original edition) and digitized online at Google Books. The only online for this scenario is for online publication only (no hard copies printed). Can someone point me in the right direction? Thanks Kay Fordham Researching Albrecht, Alden, Baker, DeLoye, DuBois, Fadden, Hanno, Immel, Kelly, Meves, Roberts, Seel, Spencer, Seeton, Stoddart/Stoddard Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Template for Book Question
Elizabeth wrote: Why would it not be the format for any other book and the repository be Google? Kay's response: Because the website where I viewed the book needs to be identified in the citation. This tells others where they may easily find the book as well. This is the way it should look per "Evidence Explained" by Elizabeth Shown Mills (sans italics not possible in plain text format). Crumrine, Boyd, editor, Pittsburgh Reports (1872), pp 298-303; digital images, Google Books (http://www.books.google.com; accessed 25 November 2008) Thanks for the feedback. Kay - Original Message - From: "Elizabeth Richardson" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 26, 2008 3:34 PM Subject: Re: [LegacyUG] Source Template for Book Question Why would it not be the format for any other book and the repository be Google? Elizabeth researching the descendants of William and Sarah (Patterson) Thompson - Original Message - From: "Kay Fordham" <[EMAIL PROTECTED]> To: "Legacy User Group" Sent: Wednesday, November 26, 2008 2:22 PM Subject: [LegacyUG] Source Template for Book Question I've been unable to locate a template for, say, a book with editor known (original edition) and digitized online at Google Books. The only online for this scenario is for online publication only (no hard copies printed). Can someone point me in the right direction? Thanks Kay Fordham Researching Albrecht, Alden, Baker, DeLoye, DuBois, Fadden, Hanno, Immel, Kelly, Meves, Roberts, Seel, Spencer, Seeton, Stoddart/Stoddard Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Source Template for Book Question
I've been unable to locate a template for, say, a book with editor known (original edition) and digitized online at Google Books. The only online for this scenario is for online publication only (no hard copies printed). Can someone point me in the right direction? Thanks Kay Fordham Researching Albrecht, Alden, Baker, DeLoye, DuBois, Fadden, Hanno, Immel, Kelly, Meves, Roberts, Seel, Spencer, Seeton, Stoddart/Stoddard Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Writer Question
Jennifer - I shouldn't post messages when tired. In looking at my last message yesterday I realize my source was constructed somewhat differently than yours as listed below. We both used the same template; however, in the Credit Line I entered the source listed by Ancestry.com: citing Nevada State Heath Division and so on. Think it is important to know at a glance where their information was gathered so we can more adequately judge credibility. I want to use the marriage book information such as you added but need to put it somewhere -- perhaps after the entry for Joe Blow and Jane Doe -- but don't want to use the word "citing" again. Will play around with it some more. Thanks for your input Kay Jennifer said: "Nevada Marriage Index, 1956-2005," database, Ancestry.com (http://www.ancestry.com/search : accessed 12 Oct 2008), entry for Victor L, King and Betty J. Hackett, 10 Feb 1998; citing Nevada Marriage Book 210: C923786, no. 71867. - Original Message - From: "Jennifer Trahan" <[EMAIL PROTECTED]> To: Sent: Friday, October 24, 2008 7:33 PM Subject: Re: [LegacyUG] Source Writer Question Hi, Kay! I used the Internet>Database template and put Ancestry.com as the Website title and not the Website Creator. I left Website creator blank. I wonder if this is just a bug in the template or if there is some reason Website creator does not show up in a footnote. I may have to check out my Mills EE book again. Jennifer - Original Message From: Kay Fordham <[EMAIL PROTECTED]> To: LegacyUserGroup@legacyfamilytree.com Sent: Friday, October 24, 2008 7:52:52 PM Subject: Re: [LegacyUG] Source Writer Question Jennifer - I have a question on your second example below (index with no image). The citation I created was in the same format; however, the creator of the database, Ancestry.com, was not included between "database" and "(http://www.ancestry.com/search)" in the endnote/footnote even though I entered them as the webpage creator. They did show up in the bibliography entry; i.e., "database, Ancestry.com (http://www - - -)." Which Source Writer template did you use? Thanks, Kay ** $10 OFF when you spend $50 or more in our store. Use coupon code: �Legacy2008� at checkout. Offer expires 10/31/08 ** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Writer Question
Jennifer - I have a question on your second example below (index with no image). The citation I created was in the same format; however, the creator of the database, Ancestry.com, was not included between "database" and "(http://www.ancestry.com/search)" in the endnote/footnote even though I entered them as the webpage creator. They did show up in the bibliography entry; i.e., "database, Ancestry.com (http://www - - -)." Which Source Writer template did you use? Thanks, Kay - Original Message - From: "Jennifer Trahan" <[EMAIL PROTECTED]> To: Sent: Friday, October 24, 2008 4:43 PM Subject: Re: [LegacyUG] Source Writer Question Richard: I have to disagree somewhat. The Nevada Marriage Index at Ancestry.com is strictly an index and does not contain images. Therefore, it is not *exactly* like the US census records. When you cite digital images, it is different than citing an index or transcription. But I do cite Ancestry.com in both citations so that I know where to go back to find the digital image or index entry. And I would also say that Ancestry.com is the originator of that particular database, though Nevada is the originator of the information that is part of the database. Ancestry formatted that information to suit its customers' needs and physically created the database, so I think it would be incorrect to give Nevada credit for the database. All: I don't understand how any can say that they've seen the original State of Nevada index at Ancestry.com. As the OP said, Ancestry took two indexes and created one database with both of them. Also, the entries I've researched in that particular index at Ancestry.com do not have images of the original two indexes. It is strictly a transcription. Are there other entries that have images of the index? In that case, then you would be citing a digital image of an index and you could put the State of Nevada or Clark County as the author of the index. It would look something like this: Clark County, Nevada, Marriage Index Book 210: 25, Smith-Jones; Marriage Bureau, Las Vegas; digital image, "Nevada Marriage Index, 1956-2005," Ancestry.com (http://www.ancestry.com : accessed 1 Aug 2008). If you were just looking at the index with no image on Ancestry.com, then you would do something more like this: "Nevada Marriage Index, 1956-2005," database, Ancestry.com (http://www.ancestry.com/search : accessed 12 Oct 2008), entry for Victor L, King and Betty J. Hackett, 10 Feb 1998; citing Nevada Marriage Book 210: C923786, no. 71867. Jennifer ** $10 OFF when you spend $50 or more in our store. Use coupon code: �Legacy2008� at checkout. Offer expires 10/31/08 ** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Source Writer Question
Jennifer - Thanks for including the two examples below. My initial question involved citing the source of the source as indicated in your example of an index/database with no images. I found inconsistencies in "Evidence Explained" where the source of the source was cited in one such case and not in another, and so I requested confirmation to ensure I understood the methodology. One needs to know where Ancestry got the data -- from state records or who knows where. This is how one decides credibility. Kay - Original Message - From: "Jennifer Trahan" <[EMAIL PROTECTED]> To: Sent: Friday, October 24, 2008 4:43 PM Subject: Re: [LegacyUG] Source Writer Question Richard: I have to disagree somewhat. The Nevada Marriage Index at Ancestry.com is strictly an index and does not contain images. Therefore, it is not *exactly* like the US census records. When you cite digital images, it is different than citing an index or transcription. But I do cite Ancestry.com in both citations so that I know where to go back to find the digital image or index entry. And I would also say that Ancestry.com is the originator of that particular database, though Nevada is the originator of the information that is part of the database. Ancestry formatted that information to suit its customers' needs and physically created the database, so I think it would be incorrect to give Nevada credit for the database. All: I don't understand how any can say that they've seen the original State of Nevada index at Ancestry.com. As the OP said, Ancestry took two indexes and created one database with both of them. Also, the entries I've researched in that particular index at Ancestry.com do not have images of the original two indexes. It is strictly a transcription. Are there other entries that have images of the index? In that case, then you would be citing a digital image of an index and you could put the State of Nevada or Clark County as the author of the index. It would look something like this: Clark County, Nevada, Marriage Index Book 210: 25, Smith-Jones; Marriage Bureau, Las Vegas; digital image, "Nevada Marriage Index, 1956-2005," Ancestry.com (http://www.ancestry.com : accessed 1 Aug 2008). If you were just looking at the index with no image on Ancestry.com, then you would do something more like this: "Nevada Marriage Index, 1956-2005," database, Ancestry.com (http://www.ancestry.com/search : accessed 12 Oct 2008), entry for Victor L, King and Betty J. Hackett, 10 Feb 1998; citing Nevada Marriage Book 210: C923786, no. 71867. Jennifer ** $10 OFF when you spend $50 or more in our store. Use coupon code: �Legacy2008� at checkout. Offer expires 10/31/08 ** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Source Writer Question
Using Legacy 7 Deluxe 7.0.0.55 Build Tried the new Source Writer for the first time today and love it. I have a question about it relating to E. Shown-Mills, "Evidence Explained." I'm citing an Ancestry.com database entitled "Nevada Marriage Index, 1956-2005." Ancestry.com, in their Source Information, cites (1) their database Ancestry.com Nevada Marriage Index, 1956-2005 . . . .; (2) Nevada State Health Division, Office of Vital Records, Nevada Marriage Index, 1966-2005 . . . .; and (3) Clark County Nevada Marriage Bureau, Clark County Nevada Marriage Index, 1956-2005 . . . . Obviously Ancestry.com is the originator of this database. I like to know from whence their data comes. Should I use in the Detail section "Citing numbers 2 and 3 above." In "Evidence Explained" I'm seeing this used in some of the image examples but not in other databases. Thanks for any suggestions. Kay Fordham ** $10 OFF when you spend $50 or more in our store. Use coupon code: ‘Legacy2008’ at checkout. Offer expires 10/31/08 ** Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Switch Gender
Using Legacy 6.0.0.117 Something has run amok in my database. I opened it a couple of days ago to print a couple of items and then exited. All was okay. Today my mother is listed as a male. When I go from me to my parents my mother is shown on the right-hand side as wife; however, her gender is now male. When I go from my mother to her parents she is shown in blue (male) on their children listing. Clicking on mother brings her up on the left side of the screen as a male with no spouses and no children. She has two marriages other than my father and this info is still in the database but not visible by clicking in the margin to rotate through marriages. The "last modified" screen shows no changes have been made to my mother's data since 2007! I have a report printed two days ago showing all was fine then. Ran a check and repair. Results were that my mother's gender is incorrect and I need to fix it. How? The Help files address only swapping husband and wife. I've not been able to access the Legacy Mailing List Archives all afternoon (page cannot be displayed message). How do I change the gender when the choices are grayed out on the individual information screen? Thanks, Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Error 6145
A Google search led to the following - same message essentially on more than one site. Don't know if it is applicable in your case. "Error 6145 is a common Windows error message. Error 6145 is probably due to a hung program running in the background or a corrupted registry file. Use CTRL+ALT+DEL to get the task manager, if there is anything listed with [Not Responding] end task it. Next, run a registry scan to check for registry errors." Kay Fordham - Original Message - From: "Pat Jones" <[EMAIL PROTECTED]> To: "LegacyUserGroup" Sent: Monday, March 03, 2008 10:22 AM Subject: [LegacyUG] Error 6145 Just ran into this error and can't find any explanation of it. What does it mean, what caused it, how do I fix it? Error filling in Descendant View information. Error 6145: Method '~' of object '~' failed Would you like to TRY IT AGAIN? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] User Group Mail Archive
I get the same results as Don below. The words I searched for are there but not found. Also, the results include the following: "MAKE YOUR DONATION TODAY Help Rebuild Lives and Communities in Hurrican Affected States. www.BushClintonKatrinaFund.org Iklan Layanan Masyarakat oleh Google" Kay Fordham - Original Message - From: "Don Brown" <[EMAIL PROTECTED]> To: Sent: Tuesday, February 19, 2008 11:13 AM Subject: RE: [LegacyUG] User Group Mail Archive I just tested and everything I search for returns "0 Matches Found" -- Don Brown Orangeville, Ontario, Canada -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RICHARD SCHULTHIES Sent: Tuesday, February 19, 2008 12:32 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] User Group Mail Archive I just tested it. Works fine? Rich in LA CA --- William Robinette <[EMAIL PROTECTED]> wrote: > I have not been able to use the search in the mail > archive for some time > now. Does anyone ever know if it going to be fixed? > It is not very > helpful if it can't be searched. > > Bill Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] about New.FamilySearch
I signed up to participate in the pilot program in December and was accepted. They did not ask if I was an LDS member. They are looking for feedback on their system. I have not yet had the opportunity to try it. Kay Fordham Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Fw: [LegacyUG] 5 lines of text on family view....how?
Valerie - All of the posts on this subject are "5 lines of text on FAMILY VIEW." The help files I quoted below state ""There are up to five lines on both the Husband and Wife box of the FAMILY VIEW" . Instructions have been provided for addressing this issue in Family View. It appears from your post below that you wish to have 5 lines of text in the INFORMATION SCREEN. I don't believe this is possible. If it is, I'm sure someone on this list will make it known. Kay Fordham - Original Message - From: "Valerie Garton" <[EMAIL PROTECTED]> To: Sent: Sunday, December 09, 2007 1:40 PM Subject: RE: [LegacyUG] 5 lines of text on family viewhow? Yes I realise that but when I open the individuals screen I only have 4 lines. Therefore how do you ever enter any information in the 5th line ? Regards from Valerie in sunny Sydney. Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow & Wexford -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kay Fordham Sent: Saturday, 8 December 2007 1:26 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] 5 lines of text on family viewhow? The Help files say - "There are up to five lines on both the Husband and Wife box of the Family View that can display information. Each of these information lines can be changed to other pieces of information you might want to view instead. To change the lines, click any of the descriptive labels to the left of the lines." Help files are readily available on the tool bar. Kay Fordham Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] 5 lines of text on family view....how?
Did you "click any of the descriptive fields to the left of the lines" as described in my response below? If so, what did you see? What I see are "field names" which I can change by clicking on the little box to the right. Perhaps you have nothing selected for the fifth line. Kay Fordham - Original Message - From: "Valerie Garton" <[EMAIL PROTECTED]> To: Sent: Sunday, December 09, 2007 1:40 PM Subject: RE: [LegacyUG] 5 lines of text on family viewhow? Yes I realise that but when I open the individuals screen I only have 4 lines. Therefore how do you ever enter any information in the 5th line ? Regards from Valerie in sunny Sydney. Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow & Wexford -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kay Fordham Sent: Saturday, 8 December 2007 1:26 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] 5 lines of text on family viewhow? The Help files say - "There are up to five lines on both the Husband and Wife box of the Family View that can display information. Each of these information lines can be changed to other pieces of information you might want to view instead. To change the lines, click any of the descriptive labels to the left of the lines." Help files are readily available on the tool bar. Kay Fordham Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] 5 lines of text on family view....how?
The Help files say - "There are up to five lines on both the Husband and Wife box of the Family View that can display information. Each of these information lines can be changed to other pieces of information you might want to view instead. To change the lines, click any of the descriptive labels to the left of the lines." Help files are readily available on the tool bar. Kay Fordham - Original Message - From: "Valerie Garton" <[EMAIL PROTECTED]> To: Sent: Friday, December 07, 2007 5:43 PM Subject: RE: [LegacyUG] 5 lines of text on family viewhow? Could some one tell me how to get 5 lines of text. I only have born, christened, died and buried. Regards from Valerie in sunny Sydney. Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow & Wexford -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard Van Wasshnova Sent: Monday, 20 August 2007 5:12 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] 5 lines of text on family viewhow? I can customize the 5th field, (default death cause) and select age at death which is blank for living persons. Is that what you mean? I cannot see my age there. BTW Diana's original message was 5KB rich text format, a very brief message with a tiny font hard to read. Leon's reply included all of Diana's message but converted to plain text, (size only 4KB), which is easier to read, takes less archive storage and people in remote areas on dialup really appreciate reduced download time. I truly hope no-one takes offence to these comments. -- Richard Van Wasshnova Seal Beach, CA - Original Message - From: "Leon Chapman" <[EMAIL PROTECTED]> Subject: Re: [LegacyUG] 5 lines of text on family viewhow? In family view, there are 5 custimizable fields to the left of the data you have entered., e.g., Born Bapt Died Bur Age The last field (Age) is one that I have customized. If you "Right Click" on the 5th field (in the example above, the Age field), then select customize you can then select any field you want to be displayed and the associated text for the field description. Leon Chapman [EMAIL PROTECTED] Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Old Issue with Unwanted Punctuation (Period)
Sherry - Thanks for the update. Yes, I would not know without downloading updates (I don't wish to do this at the present time), and this is why I posted my query to the list. I got my answer post haste. Kay - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 28, 2007 1:00 PM Subject: RE: [LegacyUG] Old Issue with Unwanted Punctuation (Period) Kay, Using the most recent build of Legacy 6.0.0.168, I just created a test source and entered your example in the Source Detail exactly as you showed in your example and the output does not include a period. The output is exactly the way I inputted the data. Same with entering that line in Publication Facts. Without downloading updates, you have no way of knowing if a problem has been fixed or not. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Old Issue with Unwanted Punctuation (Period)
Margaret - I don't plan on publishing anything for awhile - likely after Version 7 comes out - so probably will not upgrade before then. I just want to ensure that the issue is fixed (or has been fixed). I appreciate your feedback. Kay - Original Message - From: "M Couch" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 28, 2007 12:27 PM Subject: RE: [LegacyUG] Old Issue with Unwanted Punctuation (Period) Hi Kay The issue appears to be fixed, I am using the latest build (November 6). You may need to think about upgrading after all:-) Source Detail Entry: Joe Blow death certificate #12345 (1939) Results: Joe Blow death certificate #12345 (1939). Master Source Example: Entry in Title: Joe Blow death certificate #12345 Entry in Publication Facts: 1939 Results: Joe Blow death certificate #12345 (1939). -- Margaret Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Old Issue with Unwanted Punctuation (Period)
I'm using Build 6.0.0.117 of December 2006 and do not plan to upgrade until Version 7 is issued. I (and others) have reported a problem with an inappropriate period (punctuation) now for several years. The last promise we had for a fix was in December 2006. I've reviewed the revision histories on the Legacy website and do not see this issue addressed. I would really like to see it fixed by Version 7. I have many occasions where only a year in parentheses is appropriate in either the master source publication facts (where the date is entered here because it is not part of the title) or the source detail. Below are some made-up and abbreviated examples. These periods stand out like a sore thumb in report citations. Are any of you still having the problems outlined below? Thanks, Kay Fordham Source Detail Example: Entry: Joe Blow death certificate #12345 (1939) Results: Joe Blow death certificate #12345.(1939) If you use [1939] you don't have the problem; however square brackets have a different connotation. If you add any text before or after the date in parentheses you don't have the problem. -- Master Source Example: Entry in Title: Joe Blow death certificate #12345 Entry in Publication Facts: 1939 Results: Joe Blow death certificate #12345.(1939) If you add any text before or after the date in parentheses you don't get the superfluous period. Give Legacy as a Gift for 25% Off. Visit http://tinyurl.com/2b49et Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Boarders in Census Records
Here is a link to the questionnaires and instructions for enumerators from 1790 to 2000. The files are PDF and easily searched for the term boarder. You will have to repeat the search to find the actual definition of a boarder. I use these files frequently to understand the intent of some of the data included. Of course, this is not to say that all enumerators followed instructions. Kay Fordham http://www.census.gov/prod/www/abs/ma.html Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Children out of Wedlock
Richard: My U.S. birth certificate states that I am illegitimate. My parents were not married, and my mother was told she could not list my birth father even though he admitted paternity (South Dakota). That was some time ago. I have seen a great many birth certificates (California and Iowa) of more recent origin where parents were not married -- there is no mention of marital status. They simply show the birth mother and birth father and other pertinent information. No status is assigned to the child. Perhaps not all states in the U.S. have the same rules, however. The bottom line is that I am legitimate whether or not my parents' liaison was :). Kay - Original Message - From: Richard Hallford To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, October 07, 2007 5:13 PM Subject: Re: [LegacyUG] Children out of Wedlock Allen, re your subject, I have several children in my family tree of the same situation. As the core of my relations are British, I can tell you that on the official birth certs they are marked "Illegitimate" I know that this may be now an out of date use of language given modern families, but it was a word current for its time. Perhaps we need to live with the change in use of words, in context with the relevant current values around the time of birth. Im not sure what the official word for a child out of wedlock is right now. Perhaps some other reader can assist. Richard. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] source label color
Pat: From the Help File on Information Screen: "Highlighted Field Titles As you add source documentation to the pieces of information on the screen, the title labels for those fields will be highlighted a different color so that you can see at a glance which information is documented. (See Customize - Colors for information on setting the highlight colors.)" Therefore, go to Customize - Colors - Text Colors - Contents. Change the contents color to whatever you choose and save. Kay Fordham - Original Message - From: "Pat Hickin" <[EMAIL PROTECTED]> To: Sent: Saturday, October 06, 2007 8:35 AM Subject: Re: [LegacyUG] source label color From the Family View, I clicked on Customize, Colors, Contents, but I don't see anything about sources. Pat - Original Message - From: "joe Martin" <[EMAIL PROTECTED]> To: Sent: Friday, October 05, 2007 6:26 PM Subject: RE: [LegacyUG] source label color I remember that one. It's Colors tab, then contents. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joan Lalonde Sent: Friday, October 05, 2007 2:46 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] source label color Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Sandra Tyler Duncan
Robert - You were inquiring about Sandra on one of the Legacy cruises. Here is a link to her memorial at Find a Grave which has a photo. Kay Fordham http://www.findagrave.com/cgi-bin/fg.cgi?page=gr&GRid=20511602&MRid=46514106&; Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Correctly entering in independent cities in location field
The USGS Geographic Names Information System also shows Ramona as a populated place in Sacramento County. Kay - Original Message - From: Tom Montgomery To: LegacyUserGroup@legacyfamilytree.com Sent: Friday, September 21, 2007 10:22 AM Subject: RE: [LegacyUG] Correctly entering in independent cities in location field Interesting that the screenshot posted to the web site of Cities Galore shows the community of Ramona in Sacramento County. To my knowledge the only Ramona in CA is in San Diego County. Not a good choice for advertising a product... TomM -- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Carneal USA Sent: Friday, September 21, 2007 8:08 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Correctly entering in independent cities in location field Well, not to put down Legacy's GEO, keep in mind there are two other sources we can use. Unfortunately, we have to buy them. They are: U.S. Cities Galore http://www.uscitiesgalore.com/ and The Handybook for Genealogists http://www.everton.com/shopper/productview.php?SKU=8021&Category=Books I can look up locations in US Cities Galore by state and county, and get a list of towns, or, I can look up by state and town, and get a list of counties. I just love it. While I could do without it, I don't want to! The Handybook stays on my desk! I use it all the time. It has the following information. 1.. Legal records, where to send for them; recorders office, county clerk, etc. You don't send to just the clerk of a given county/state for records; they all have specific offices. 2.. Where to write for a Census 3.. Phone numbers 4.. When created from another county, or whether it was the Original County 5.. Maps - Border Counties of other states 6.. Migration Trails The bad thing about it is it is expensive! Robert aseddon.com wrote: Strange, my wife was born in "San Fernando, Los Angeles, California, USA" and I just clicked on the little blue globe and it verified the entry as correct. Version 6.0.0.155 Deluxe Art Seddon - Original Message - From: Toni Allen To: LegacyUserGroup@legacyfamilytree.com ; aseddon.com Cc: LegacyUserGroup@legacyfamilytree.com Sent: Thursday, September 20, 2007 4:08 PM Subject: Re: [LegacyUG] Correctly entering in independent cities in location field I tripped over another similar city, county ... I looked up Los Angeles, Calif in the Geo Location file and it said "Los Angeles, Los Angeles, California, USA" But, when I ran the US County verification program it listed all the Los Angeles address with a message "Never a county by the name of Los Angeles in the state of California" Since I lived in Torrance, California for 20 plus years and knew there was a Los Angeles County, just out of curiosity I checked the AniMap program, and they show Los Angeles county... Guess you pays your money and takes your choice! Toni in Michigan Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.13.28/1021 - Release Date: 9/21/2007 2:02 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.13.28/1021 - Release Date: 9/21/2007 2:02 PM Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] 93-page pension file - handle?
Janis, I'll be interested to see what responses you receive on this query. I have 3 Civil War pension files on 8-1/2 x 14 paper. The Revolutionary War pension file is on 11 X 17. I used the MRIN filing system in notebooks and currently have a piece of paper in the appropriate sections stating where the actual files are stored. At present they are lying flat in a file drawer in legal sized manilla folders. This is not good usage of file space but I don't know where else to put them. Thanks for broaching this subject. Kay -- Original Message - From: Janis Gilmore To: LegacyUserGroup@legacyfamilytree.com Sent: Monday, September 10, 2007 11:48 AM Subject: [LegacyUG] 93-page pension file - handle? How do others on the list handle the filing of a 93 page complete pension file? I am trying to put everything in notebooks, with sheet protectors. This is obviously not going to fit that format. Although none of the original sheets appear to have been legal size, the person at NARA who copied the file for me put it on legal paper. I don't use legal-size folders (petty prejudice on my part). Surely no one would use 45 page protectors? Thoughts welcomed, in spite of the fact that it is a lame question; I think the only answer must be "file it in a legal size folder." Janis Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Something new I noticed in children's list (living/dead)
Susan, I have the gray boxes surrounding the living children numbers. My numbers are in red. I set this color from the Options - Customize - Data Format - Living Indicator. Hope this helps, Kay Fordham - Original Message - From: "Susan Daily" <[EMAIL PROTECTED]> To: Sent: Friday, August 24, 2007 4:35 PM Subject: Re: [LegacyUG] Something new I noticed in children's list (living/dead) I should have noted that in addition to the faint box on Family View, the living children's numbers are purple, and the dead children's numbers are blue. But I can't find the settings anywhere. Maybe it is a permanent feature? On 8/24/07, Heather Stovold <[EMAIL PROTECTED]> wrote: You can set the colours in options... mine, the person's number is in blue Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Favorite Legacy Tip
Thanks, Cathy Kay - Original Message - From: "Cathy" <[EMAIL PROTECTED]> To: Sent: Sunday, August 19, 2007 5:34 PM Subject: Re: [LegacyUG] Favorite Legacy Tip Hi Kay, It's on the Options > Customise - Data Format Tab Cathy Heather, Thanks for reminding me about the "living" feature. I saw reference to it in the help files as follows. "Legacy can show an indication of whether or not the main two individuals are marked as Living and also each child in the list below them. To do this, check the Highlight Living individuals option." It does not say how/where to access this option. I don't see it on the "view" section of the "customize" menu. Thanks, Kay Fordham Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Favorite Legacy Tip
Heather, Thanks for reminding me about the "living" feature. I saw reference to it in the help files as follows. "Legacy can show an indication of whether or not the main two individuals are marked as Living and also each child in the list below them. To do this, check the Highlight Living individuals option." It does not say how/where to access this option. I don't see it on the "view" section of the "customize" menu. Thanks, Kay Fordham All Rights Reserved - Original Message - From: Heather Stovold To: LegacyUserGroup@legacyfamilytree.com Sent: Saturday, August 18, 2007 1:11 PM Subject: Re: [LegacyUG] Favorite Legacy Tip Well, I learned it here - but setting the options to show the headings differently if the person is alive is nice. And - just found out about the on another thread on a lot of screens, to see the ages people were at various main events... Heather Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Soliciting Opinions
We had the same problem with our 3 in 1 HP (copier/scanner/FAX). Found a workaround solution on the Internet. Seems the software was running but was hidden. Even so, the workaround was a hassle and we uninstalled IE 7. HP was supposedly working the issue and may have fixed it by now. Kay Fordham - Original Message - From: [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Thursday, August 16, 2007 4:23 PM Subject: Re: [LegacyUG] Soliciting Opinions HP multifunction printer software was not compatible for whatever reason. -Original Message- From: Karl Plenge <[EMAIL PROTECTED]> To: LegacyUserGroup@legacyfamilytree.com Sent: Thu, 16 Aug 2007 6:58 pm Subject: Re: [LegacyUG] Soliciting Opinions I still haven't downloaded the latest IE because of the HP problems. I I don't know what the HP problems are, can you explain that? Thanks! Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Embracing Change
Phil, Neither Quimet's nor Abel's messages had an attachment when they arrived in my inbox. Kay Fordham - Original Message - From: "Phil Hawkins" <[EMAIL PROTECTED]> To: Sent: Tuesday, July 10, 2007 4:30 PM Subject: Re: [LegacyUG] Embracing Change When CQ Quimet sent his message on the above topic it came with an attachement WINMAIL.DAT So did Paul Abel's response. I understand attachements are not allowed Are they sent in error or are they viruses? I haven't opened them amd will delete both posts as well as the attachements If the above people were not aware of the attachement then may I suggest a virus check of their machines Regards Phil Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Re: Digitized Articles and Books
On Google select "more", "books" "advanced book search." Here you may search by words, book title, author, etc. You may even locate a library containing the book. Some are full view -- some are not. I have found here many books that I have been unable to access otherwise. http://books.google.com/advanced_book_search Cornell's Making of America is another resource. http://moa.cit.cornell.edu/ Here is University of Michigan's corresponding site. http://moa.cit.cornell.edu/ Here is the BYU digitized books site: Select Digital Collections at BYU in the bottom right-hand corner - then Text Collections and then Family History Archive. http://www.lib.byu.edu/ There are more where these came from. Kay Fordham Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/[EMAIL PROTECTED]/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Master Source List Missing
Hi Ron If I change the "show only" to verified, click on the icon in Family View, and select "cite a master source," nothing turns up - because none of my master sources are set as verified at the master source level. I have ticked some as verified on the assigned sources menu, but this does not place a tick mark in the verified box at the master source level. Hope this makes sense. Kay . - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 07, 2007 4:12 PM Subject: Re: [LegacyUG] Master Source List Missing Kay, I think you will find that only affects the screen at View>Master Lists>Sources and not the list obtained when clicking the icon in Family View and then "cite a mater source" Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* - Improve Colour Photos with The GIMP Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __________ From: "Kay Fordham" <[EMAIL PROTECTED]> Reply-To: LegacyUserGroup@legacyfamilytree.com To: Subject: Re: [LegacyUG] Master Source List Missing Date: Wed, 7 Mar 2007 15:50:49 -0800 Glenn, Go to View - Master Lists - Source. On the right-hand side of the menu is a statement "Show Only." If the person has ticked one of the items such as "verified" then only that category will appear when you attempt to cite a master source. Sometimes people tick those boxes inadvertently. Kay - Original Message - From: "Glenn Kinkade" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 07, 2007 3:26 PM Subject: [LegacyUG] Master Source List Missing I am trying to help a Legacy user in Dallas that has a problem with the Master Source List. After opening Legacy if the source icon is selected in the Family View it displays all sources that have been assigned to that individual. Both the "Edit Detail" and "Edit Source" will display the source information.; however, if you want to add a new source and you click on "Cite a Master Source" the Master Source List is blank. Also, if you go to View>Master List>Source the Master Source List is blank. What do you do to retrieve the missing Master Source List? Thanks for your help. Glenn Kinkade _ Get Hotmail, News, Sport and Entertainment from MSN on your mobile. http://www.msn.txt4content.com/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Master Source List Missing
Glenn, Go to View - Master Lists - Source. On the right-hand side of the menu is a statement "Show Only." If the person has ticked one of the items such as "verified" then only that category will appear when you attempt to cite a master source. Sometimes people tick those boxes inadvertently. Kay - Original Message - From: "Glenn Kinkade" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 07, 2007 3:26 PM Subject: [LegacyUG] Master Source List Missing I am trying to help a Legacy user in Dallas that has a problem with the Master Source List. After opening Legacy if the source icon is selected in the Family View it displays all sources that have been assigned to that individual. Both the "Edit Detail" and "Edit Source" will display the source information.; however, if you want to add a new source and you click on "Cite a Master Source" the Master Source List is blank. Also, if you go to View>Master List>Source the Master Source List is blank. What do you do to retrieve the missing Master Source List? Thanks for your help. Glenn Kinkade Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Off Topic
Robert - A quick Google search on "pony express"+stations resulted in the following link (plus others). http://www.xphomestation.com/frm-xpsta.html Hope this helps get you on your way, Kay Fordham - Original Message - From: "Robert Carneal" <[EMAIL PROTECTED]> To: Sent: Thursday, February 01, 2007 10:55 AM Subject: [LegacyUG] Off Topic Hello Legacy Users- If I wanted to find a book, or at least a listing, of extinct locations where the Pony Express, early post offices, where horse and carriages stopped off during a journey, where / how would I find such a book or listing? I have come on a few names; all ending with the word "Station," which makes me first suspect it is one of those I mentioned above. Anything that would tell me the present location, or former location (and how to find it) would be appreciated. "Linas Station Cemetery" is one such location. Sounds pretty obscure to me. Thank you everyone. Robert Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] 1/2 siblings
The following data is from the Legacy Program Help Files. The Siblings List shows the current individual along with all their brothers and sisters. You can set anyone in the list to be the current individual by selecting the person. (To select a person, either highlight the name and click Select or just double-click on the person's name.) Showing Half Siblings If you select the Show Half Brothers and Sisters box, all the children born to either of the current individual's parents are shown. This includes children born to the father with other wives and to the mother with other husbands. Step children are not shown because they were not born to either the father or the mother of the current individual. The Sibling List is reached by clicking the Siblings icon at the bottom of the Husb or Wife box on the Family View or by choosing Siblings List from the View menu. Does this help? Kay - Original Message - From: "Elizabeth Bray" <[EMAIL PROTECTED]> To: Sent: Tuesday, January 09, 2007 3:11 PM Subject: [LegacyUG] 1/2 siblings I recently lost the data from my hard drive, and when I reinstalled Legacy I no longer get the 1/2 siblings showing up. I have tried to find out how to put them back on, but have had no success. As there is a discussion at the moment regarding 1/2 siblings maybe someone can point me in the right direction? Liz Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] HTML
Sandra - In Outlook Express just setting the options to send in plain text only is not sufficient. You need to address the issue of "replying in the same format as the sender." This means if the sender transmits in HTML your reply will also be in HTML. On the main tool bar go to Tools - Options - Send - and untick "reply to messages in the same format in which they were sent." Hope this helps, Kay - Original Message - From: "Sandra Tyler Duncan" <[EMAIL PROTECTED]> To: Sent: Thursday, December 14, 2006 1:30 PM Subject: Re: [LegacyUG] HTML Don, Kay, and Wendy Thank you so much for the pointers, I have set the LEGACY mail to send in only plain text and I hope this one goes that way as well and I do have Outlook Express Blessings Sandra - Original Message - From: "Wendy Howard" <[EMAIL PROTECTED]> To: Sent: Thursday, December 14, 2006 12:59 PM Subject: Re: [LegacyUG] HTML I accidentally sent a post to this list in HTML just recently too. Now I've worked out what happened, I'll share the details in case it helps someone else... I switched to using Mozilla Thunderbird for my emails a month or so back. One of the first settings I set up was to make all emails to Rootsweb and Legacy in plain text. So far, so good - that worked a charm. BUT, along the way, I got tired of the program asking me frequently if I wanted to send in plain text or HTML for addresses where I hadn't set their preference, so I went in and found the particular setting governing this behaviour - under Tools / Options / Composition / General, then click on the "Send Options" button, and in the first setting choose the behaviour for "When sending messages in HTML format and one or more recipients are not listed as being able to receive HTML" I chose "send the message in both plain text and HTML". Once I'd set that, things changed and I suddenly found that my next post went to the LUG in HTML. Oops! Sorry! This setting over-rode the one I'd made in the first instance, that stated "legacyusergroup.com" was only to be sent plain text (which happens to be on the same screen as the one I described above). What I've done to remedy this is to go into my Address Book and set for the LUG address that it is only to be sent plain text, and now I'm back to not having to remember to set plain text for my posts, and I'm not bugged by messages for recipients who aren't in my Address Book, or I haven't said which form they're to get. Should have done that in the first place, but didn't know what was to come. ;-) If you're using Outlook Express, there is a setting there, in the Address Book, if I remember correctly, where you can determine that all emails sent to that particular address will be in plain text. I used to use that before switching programs. Hope this helps someone. :-) Kind Regards, Wendy Howard Kaiwaka, Northland, New Zealand http://freepages.genealogy.rootsweb.com/~wendyh65/ *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] HTML
Sandra, I don't know about Comcast, but in Outlook Express I can choose whether to reply to messages in the format sent (i.e., html). There is an option in tools to tick a box for this setting -- so it needs be set only once. Kay - Original Message - From: "Sandra Tyler Duncan" <[EMAIL PROTECTED]> To: Sent: Thursday, December 14, 2006 12:23 PM Subject: [LegacyUG] HTML Hi Don if you mean me Sandra, I have my mail set to only send non-html but I just hit reply ass I am doing in this message and if this one comes out HTML then can someone tell me how to shut it off on reply messages, please Sandra *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Map My Family Tree - how do I recover my registration key?
Yes it is. Go to the link below and click on Add-Ons. It is first on the list. http://www.legacyfamilytree.com/Store/enter.html?target=../en-us/dept_2.html&mid=Legacy Kay Fordham - Original Message - From: "Dora Smith" <[EMAIL PROTECTED]> To: Sent: Tuesday, December 12, 2006 4:47 PM Subject: Re: [LegacyUG] Map My Family Tree - how do I recover my registration key? Oh. That straightens it out. Though I actually checked, and it wasn't on your list of software. Yours, Dora Smith Austin, TX [EMAIL PROTECTED] - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> To: Sent: Tuesday, December 12, 2006 10:17 AM Subject: RE: [LegacyUG] Map My Family Tree - how do I recover my registration key? Dora, Map My Family Tree is a product that we sell, along with other Progeny programs. We *don't* sell Family Atlas. Therefore, a discussion of that program would be greatly off-topic for our list. -- Internal Virus Database is out-of-date. Checked by AVG. Version: 7.5.431 / Virus Database: 268.14.19/556 - Release Date: 11/28/2006 3:22 PM *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Map My Family Tree - how do I recover my registration key?
I suspect you should ask Sales that question. Kay Fordham - Original Message - From: "Dora Smith" <[EMAIL PROTECTED]> To: Sent: Monday, December 11, 2006 5:53 PM Subject: Re: [LegacyUG] Map My Family Tree - how do I recover my registration key? What information do I need to give them? Yours, Dora Smith Austin, TX [EMAIL PROTECTED] - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> To: Sent: Monday, December 11, 2006 3:43 PM Subject: RE: [LegacyUG] Map My Family Tree - how do I recover my registration key? Dora, Contact Sales at mailto:[EMAIL PROTECTED] or 1-800-753-3453 Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dora Smith Sent: Monday, December 11, 2006 1:07 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Map My Family Tree - how do I recover my registration key? I did God knows what with my registration key. I never keep my programs in the humungous packages they come in. The CD went into a CD case. How do I recover my registration key? Yours, Dora Smith Austin, TX [EMAIL PROTECTED] *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp -- Internal Virus Database is out-of-date. Checked by AVG. Version: 7.5.431 / Virus Database: 268.14.19/556 - Release Date: 11/28/2006 3:22 PM *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] December 6 Build Question
Okay, Gail, thank you for the clarification. Kay - Original Message - From: "Gail Rich Nestor" <[EMAIL PROTECTED]> To: Sent: Friday, December 08, 2006 3:51 PM Subject: Re: [LegacyUG] December 6 Build Question Hi Kay, I think this enhancement was in response to one of my prior requests. Before the enhancement, the user had to choose for the whole source title line to italicized or else the whole line would not be italicized. There were a few cases that called for part of the source title to be in italics and part not to be in italics. For example, when I wanted to note a "rev. ed." or a specific volume number, I used the big "I" in the formatting tool box to italicize just the book title and not the other part. This formatting was not coming out in the gedcom file and therefore it was not showing up on my web site. It did work in the event notes, but just not in source titles. Because I did not want to wait for this fix (I didn't know it would come so soon), I just went into my files and added the and formatting codes as needed which then held up in the gedcom transport. This wasn't a big deal, but it's all part of helping sources to be formatted in a way to be consistent with current bibliographic and genealogy sourcing standards. I still hope there will be more enhancements to come with sourcing! Gail Rich Nestor Smyrna, Georgia www.roots2buds.net On 12/6/06, Kay Fordham <[EMAIL PROTECTED]> wrote: Thanks, Ron. I guess the "honors the text formatting" then has something to do with the Page Setup or Change Fonts selections on the Options menu? Kay - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> Subject: RE: [LegacyUG] December 6 Build Question Kay, They can be found using View>Master List>Source>Options>Print. Also View>Master List>Source Type>Options>Print Ron Ferguson *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] December 6 Build Question
Thanks, Ron. I guess the "honors the text formatting" then has something to do with the Page Setup or Change Fonts selections on the Options menu? Kay - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Wednesday, December 06, 2006 2:42 PM Subject: RE: [LegacyUG] December 6 Build Question Kay, They can be found using View>Master List>Source>Options>Print. Also View>Master List>Source Type>Options>Print Ron Ferguson --- From: [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] December 6 Build Question Date: Wed, 6 Dec 2006 14:05:30 -0800 Per Geoff's email, the list of changes in the subject build includes: "Sources - The Print option on the Source Entry screen now honors the text formatting" What/where is the source entry screen? Looking at the template for adding a new source I do not see a "print option" Thanks, Kay Fordham *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] December 6 Build Question
Per Geoff's email, the list of changes in the subject build includes: "Sources - The Print option on the Source Entry screen now honors the text formatting" What/where is the source entry screen? Looking at the template for adding a new source I do not see a "print option" Thanks, Kay Fordham *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] 8MB Attachments
1. I did indeed receive the "much discussed" attachment. It was a Legacy zip file of a database. I deleted it. 2. The sender stated he had sent the zip file to Henry Peterson. 3. While I cannot speak for the sender, it appears (from the #2 statement above) that he did not intend to transmit the document to the entire Legacy List. 4. I acknowledge that this may have caused problems for some individuals on the list; however, let's stop beating a dead horse and move on to more productive conversation. Kay Fordham *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: Fw: [LegacyUG] Foster children
Dora, I presume you contacted the societies listed below via email. If so, I would be interested in seeing their responses to your query. If you would care to share, please send to me off-list at [EMAIL PROTECTED] Thanks, Kay Fordham - Original Message - From: "Dora Smith" <[EMAIL PROTECTED]> To: Sent: Friday, December 01, 2006 4:41 PM Subject: Re: Fw: [LegacyUG] Foster children I heard back from teh people I contacted at the NGS, TAG, and NEHGS, and all said that as far as they know no such rules exist, and the editor of National Genealogical Society Quarterly wanted my source of any information that the rules we've been debating here exist. He said that in reality, none of the genealogical software currently available conforms to genealogical society standards, and one place they particularly fall short is in allowing for family complexity, such as step children, foster children, and adopted children. He recommended Numbering Your Genealogy: Basic Systems, Complex Families, and International Kin (Arlington, Va.,: National Genealogical Society, 1999), a publication that every serious genealogist should have. The second chapter addresses step relationships, adoptions, and similar complexities. It is based on a article that appeared in NGSQ about a decade ago. *** Give the gift of Legacy for the holidays! Order online at http://legacyfamilytree.com/Redirect/Store-Legacy.asp or call 1-800-753-3453. *** Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] IE7 Update
Our HP Director 5500 series (all-in one FAX, scan, copy) did not work with IE7 on either computer. Lots of posts about this on the internet, including a work-around temporary solution until HP resolves the issue. No problems with Legacy, however. Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Where is Everyone?
Haven't received any messages for a couple of days. Haven't used the evil "U" word in any messages to the group. Is there a problem with the list? Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Can't find sources after install & restore
Sherry, When I first opened the database the sources did not appear. Rebooted and there they were. I don't know how this could have happened but all is back to normal. Thanks for your feedback. Kay - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> Sent: Saturday, November 04, 2006 7:32 AM Subject: RE: [LegacyUG] Can't find sources after install & restore Kay, The sources are in the Family File itself. Check the option you have selected on the Master Source window. Do you have any of the filters set under "Show Only"?? Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com -Original Message- [mailto:[EMAIL PROTECTED] On Behalf Of Kay Fordham Sent: Saturday, October 28, 2006 12:15 PM To: Legacy User Group Subject: [LegacyUG] Can't find sources after install & restore Using Legacy 6.0.0.110 - 28 Aug 2006 1. Installed Legacy 6.0 Deluxe from web site onto new hard drive (will do the latest update later today). 2. Restored family file from backup copy. 3. Sources are missing 4. Have not yet copied files from old Legacy Data Folder. 5. What happened to all of my sources? Where are they normally stored? Thanks! Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Font Question - Screen View
Using Legacy 6.0.0.110 - 28 Aug 2006 Changing the "screen fonts" affected the individual's information screen, the marriage information screen, and so on. However, nothing changed on the main family view screen. The test is much larger than what appears in the individual's or marriage information screen. The "stretch fonts when resizing" box is not ticked. How do I change the fonts on the main family view screen? Thanks, Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Found the Sources - Ignore last message
They were not there - not they are. Gremlins I guess. Kay Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Can't find sources after install & restore
Using Legacy 6.0.0.110 - 28 Aug 2006 1. Installed Legacy 6.0 Deluxe from web site onto new hard drive (will do the latest update later today). 2. Restored family file from backup copy. 3. Sources are missing 4. Have not yet copied files from old Legacy Data Folder. 5. What happened to all of my sources? Where are they normally stored? Thanks! Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Questions on Installation and Copying Files
Thanks to Ron, Jack & Cathy who responded to my query. To answer some of your questions - 1. I did indeed rename my old drive - it is now F. I will do away with it in the near future. 2. I did indeed copy some files from F to C into a folder named Old C. 3. The files copied over were mainly pictures, scans, and documents. These have now been integrated into my New C. I also had backup copies on CD. 4. I am reinstalling program files onto my New C. 5. The only program copied was Legacy, and mainly for the data files. 6. I did try to run Legacy from the copied files and got the Runtime Error 339 message. 7. However, running Legacy from the Old F drive results in the same error. It worked fine the day before my hard drive acted up. 8. The Runtime Error 339 file mentioned is VSOCX6.OCX. The Legacy Technical Support web site has recommended solutions for this item. I have DSL and will go for download from the Legacy site. Hopefully, this will correct the problem. If not I will resort to the recommendations on the Legacy web site. Incidentally, the hard drive on my husband's computer failed about an hour after mine went wonky. My daughter's went south a couple of days later. Is it a family curse? We have all been working a week or so getting back in business. So folks -- back up everything you can before your hard drive fails -- as it eventually will. Again, thanks- Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Questions on Installation and Copying Files
Using Legacy 6.0.0.79 (20 January 2006) - Updating this week Background 1. Hard drive wouldn't boot - had corrupt file which could not be repaired. 2. Installed new hard drive and reinstalled Windows XP. 3. Made new hard drive Master and old drive Slave. 4. Copied files from old hard drive to new drive in folder called "Old C Drive" (including Legacy). Will integrate necessary stuff later. 5. Attempted to start Legacy but get Runtime Error 339 (DLL or OCX file changed, missing, etc.). Obviously a shared file is now missing. 6. Legacy web page instructions are to first uninstall Legacy and then reinstall. Questions 1. Believe I will not bother with the program existing in the old C drive folder. Would like to do a new install on my new C drive. I have the Legacy 6.0 CD. Should I install from it and then download updates from the website? OR should I download the whole program from the website? 2. I need to copy my data files over to the new drive as well. There are many files in this folder other than my family databases; i.e, with extensions of CB, FG, TC and so on. What are these and can I just leave them behind? What besides the family files do I need to relocate? 3. Anything else I need to be mindful of? I do have backups on my hard drive and on CD. Thanks - Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Please Stop Sending HTML messages to the List
Yes - yesterday my anti-virus program discovered a worm in an HTML email message and refused download. Believe me, you do not want these worms on your computer. Kay Fordham - Original Message - From: "RICHARD SCHULTHIES" <[EMAIL PROTECTED]> To: Sent: Thursday, October 19, 2006 4:54 PM Subject: Re: [LegacyUG] Please Stop Sending HTML messages to the List This is not accusing but just stating, this is how many of the worms get into peoples PCs. Unaware people recieve a worm, and next e-mail out carries itself to everywhere. Worms cannot hide in plain text, but love to hide in HTML. I have the softwear to stop them for myself, but not everyone does. That is the main reason for NO HTML, and secondary was for those people, and there are many, who cannot get access, or afford DSL style connections. There will come a time that these folks may fall throuth the cracks, but having been one until 6 months ago, I feel for them, and hope they can catch up with us ASAP. Rich Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Screen Shots
A couple of years ago I decided to develop a tool for uniform source entry. The first method tried was screen shots of the sources that were to be "the standard." The problem with them was that not all text showed on the screen (without scrolling to the right) in some of the boxes; i.e., the Source List Name and the Source Detail Information. Hence, the screen shots did not capture all of the text. I then resorted to templates developed in MS Word -- more work initially but they work well for me. There are examples of each type of source - US Census, State Census, Canadian Census, Vital Record, Vital Records from a Book, and so on. Question: Do you have a method for capturing all of the text without making more than one screen shot of a given source? Kay Fordham - Original Message - From: "Lance" <[EMAIL PROTECTED]> To: Sent: Friday, October 13, 2006 11:28 PM Subject: Re: [LegacyUG] Screen Shots There are a number of screen capture utilities available - free and shareware. Windows users though have a basic built-in screen capture utility all ready to use with a couple of keystrokes. To capture the full screen, just press the PRT SCR key (to the right of the F12 key in the top row). This will copy the full desktop view to the Windows clipboard. From there it can be pasted into any imaging software (MS Paint for example). MS Word or any other application which accept pasting. To capture the uppermost screen you have open, press the ALT key along with the PRT SCR key. Again, you can then paste it into an imaging application. In there it can be edited or have text added to explain what it is about. Here is another free one: Mirek's Free Windows Software http://www.mirekw.com/winfreeware/mwsnap.html For anyone who dose a considerable amount of screen capturing, Snagit is probably the ultimate tool in the shareware field: SnagIt Screen Capture - Capture and Share Your PC Screen http://www.techsmith.com/snagit.asp If you would like an illustrated, printed guide, there is available for download a .DOC file here: http://lpc1.clpccd.cc.ca.us/lpc/dfields/HowTos/print_screen_worksheet.doc Lance Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] User group archives?
Jeff - Here is the URL for the archives. It is searchable -- just tried it. http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/maillist.html Kay Fordham - Original Message - From: "malkajef" <[EMAIL PROTECTED]> To: Sent: Thursday, September 07, 2006 2:07 PM Subject: [LegacyUG] User group archives? I am new to Legacy and rather than re-ask questions that have already been answered, I might wish to search the archives. Are the user group messages archived somewhere? Jeff Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Organizing your Research
Keith: I struggled for years trying various filing systems which did not work for me. I finally decided upon the system outlined by Geoff Rasmussen on the Legacy Site and am in the process of setting it up. With over 1000 MRINs in my database (and growing) the prenumbered sets on the market would be a costly option. I am using plain old cardstock and Avery index tabs with computer printable inserts. The tabs are labeled 16221 S-101 1" clear. There are 25 self-adhesive tabs to a package. I ordered 25 packages and the cost was $44.75 - this would make the unit price $1.79. I cut them and the inserts in half (there are now 1250 labels) and hand number them. You can also print them on the computer. I was only able to find this specific label on the Office Depot website, but there may be other sources in your area. My process is obviously more labor-intensive and the end-product not as professional looking as it would be with the prenumbered dividers, but it works for me. Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] additional location data
I had ancestors in Iowa Township, Iowa County, as well as Iowa City next door in Johnson County. There are Iowa Townships in at least 9 other counties as well. Also, Iowans have a strange habit of using the township name as residence (without the township designation), and seeing it in print makes one believe it is the name of a town. For example, you may see newspaper reports of so and so from Ilyria or Dover. These are township names and the individuals named are rural residents. The marriage certificate of one of my ancestors listed his residence as Myron. Took me a while to discover that Myron was a township, not a town. The bottom line is that one should be specific in detailing their locations to preclude confusion. Kay - Original Message - From: "RICHARD SCHULTHIES" <[EMAIL PROTECTED]> To: Sent: Monday, August 21, 2006 11:17 AM Subject: Re: [LegacyUG] additional location data Yer, there are too many examples of multiple layers named the same thing. I have heard, there is a Iowa Township, in Iowa County, in the state of Iowa. But, Iowa City is in Johnson County? In general, I use Township if rural, because that 'shrinks' the area discussed. If I have any other small place, I use it instead. In my location's notes I put explanations on this, and list the places mentioned in the Twp., especially if I don't have GPS yet. Rich --- Diane Murach <[EMAIL PROTECTED]> wrote: I'm interested in the correct practice regarding the following: If entering a township, do you write township after to distinguish it from a town? Fairfield Township, Fayette County, Iowa Do you write the word county after a county name to make it clear one is naming a county? Ex Seattle, King County, Washington If you only know the county, do you use county, then state? Ex Allen County, Ohio Does one normally include the town, township, county, state, if all are known? I see many trees on Ancestry and it is quite confusing when one doesn't take the extra time to clarify, example Clinton, New York. Clinton is a county and also a city in a Oneida County in New York. Diane Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] additional location data
Diane, I have numerous areas where a relative lived in a rural area in a township. I always state it as you did below; i.e., Fairfield Township, Fayette County, Iowa. By the way I was raised in Fayette County! Stating it in this fashion leaves no doubt as to what specifically is meant. I was taught (by an LDS mentor) to use ", Fayette County, Iowa" when the location within the county is unknown (the space-comma delineates a missing entry.) Also ", , New York" when only the state is known. Kay - Original Message - From: "Diane Murach" <[EMAIL PROTECTED]> To: Sent: Sunday, August 20, 2006 3:36 PM Subject: Re: [LegacyUG] additional location data I'm interested in the correct practice regarding the following: If entering a township, do you write township after to distinguish it from a town? Fairfield Township, Fayette County, Iowa Do you write the word county after a county name to make it clear one is naming a county? Ex Seattle, King County, Washington If you only know the county, do you use county, then state? Ex Allen County, Ohio Does one normally include the town, township, county, state, if all are known? I see many trees on Ancestry and it is quite confusing when one doesn't take the extra time to clarify, example Clinton, New York. Clinton is a county and also a city in a Oneida County in New York. Diane Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Punctuation Problem in Source Detail
Thank you Brian! Appreciate your attention to this issue. Kay Fordham - Original Message - From: "Brian/Support" <[EMAIL PROTECTED]> To: Sent: Friday, August 11, 2006 7:23 PM Subject: Re: [LegacyUG] Punctuation Problem in Source Detail Kay, I tested this and will submit a report to have the extra period problem fixed. Brian Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Kay Fordham wrote: Using Legacy 6.0 & 20 Jan 2006 Build When I and a number of other users reported this problem several years ago it was put on the "to be fixed list," but the anomaly is still in existence. I searched the list archives but did not find anything on the resolution of this issue. Whenever I enter information in parentheses at the end of a source detail statement Legacy inserts a period after the statement and before the parentheses. For example I enter : Samuel Alden, register number 251 (1889). What I get in the source preview screen and in print is: Samuel Alden, register number 251.(1889). I don't get the unwanted period if I use brackets rather than parentheses; however, brackets have an entirely different connotation in genealogy. I have many sources similar to the above where there are no page numbers. The data is set out by register numbers within a one-year period. I prefer to have the year set off by parentheses for clarity and emphasis. There are times when I wish to enter other data in parentheses at the end of the statement as well. Is there something I should be doing differently to eliminate the superfluous period (other than a redo of hundreds of source detail sentences)? Thanks! Kay Fordham Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp