Salvatore,
ebg-multihop is not required for load balancing. It can be beneficial
to use a loopback to peer from/to, similar to IPX internal networks
provide better load balancing for NetWare servers.
If you feel it's a good idea to peer to/from loopack interfaces
(redundancy, better
Sorry if you get this twice or thrice...problem with outlook and dates...
Hi, all,
I have a problem that is making me scream and shout, gonna knock myself out.
It has to do with my PIX firewall configuration.
The long and short of my problem is that the inside network can only reach
inside
Hi, all,
I have a problem that is making me scream and shout, gonna knock myself out.
It has to do with my PIX firewall configuration.
The long and short of my problem is that the inside network can only reach
inside hosts and outside networks: it can not reach any host on on the DMZ,
depsite
Raj,
Is the software going to be open source? I have a large collection of
scripts for automating configuration (during rollouts) and basic
troubleshooting. I've had intentions of providing a GUI front-end at
some point, either in Java or PHP, but never seem to have the time to
get around
Hi, all,
I have a problem that is making me scream and shout, gonna knock myself out.
It has to do with my PIX firewall configuration.
The long and short of my problem is that the inside network can only reach
inside hosts and outside networks: it can not reach any host on on the DMZ,
depsite
I took the CCIE Written yesterday just to see how difficult it was.
It is the most difficult exam that I've ever seen except maybe for the
MCSE 2000 Accelerated.
I would advise anyone planning to take this exam not to take it lightly.
It is difficult, much more difficult than the old one.
My first Network Administrator job came to me when the current Network
Administrator was fired for lying about his certs, and I was the most
experienced (relative term) person there. At the time, I was way over my
head, but it all worked out fine since there are always resources to tap,
people to
Hi all,
I have just acquired a 3600 router. There seems to be a problem with the
console, whenever I connect, it just produces garbage. I can get into it
through the serial connection. However, I don't know the password and the
only password recovery techniques I've found is to go in through
When I left my last job (one that I liked) for this one, my boss gave me a
nice poster. It is a picture of a basketball court and to the bottom it
says:
You will always miss 100% of the shots you don't take...
I believe that statement says it all.
Good Luck and I hope it all works out for you.
Hi,
Congratulation that you solve it out.
network type. Shouldn't the mismatch have caused my neighbor relationship
to be affected?
Since OPSF network type was non-broadcast network, the hello interval is 30
second and the dead interval is 120. These interval times match the
My question to Tom and Raj is, where can I get it? I am not a programmer
(yet, working on that), so scripts like these that are free are always a
welcome site. If you guys are willing to share what you have (your
livelihood doesn't depend on it) let me know.
Robert
Tom Martin wrote in message
Hi, Everyone
I just been awarded the responsibility of installing 4 3745 Cisco routers.
The local phone company wanted $5500 dollars for the installation and my
employer thinks is to much. I was looking at the Cisco website for sample
configurations but I couldn't find them. I need to share the
make sure your com settings are correct on your terminal program: 9600 bps,
8 data bits, no parity, 1 stop bit, hardware flow control.
Jason.
Funnell Giles wrote in message
news:[EMAIL PROTECTED]
Hi all,
I have just acquired a 3600 router. There seems to be a problem with the
console,
Sounds like you should go for it. But if you turn it down, let me know, I'll
take it, as I _am_ a senior engineer, whose looking for work (laid off from
Lucent).
Jason.
B Rudy wrote in message
news:[EMAIL PROTECTED]
Hey guys, I just got an offer to become a 2nd senior network engineer for
Thanks Tom.. good explanation! This was my thought to the tee.. Yes I agree
with cisco that it does not hurt to add it to add value to the design.. But
as you just stated.. ebgp-multihop is NOT necessary for load balancing
That was my point all along.. Just wanted to clarify my point so I am not
Try changing the baud rate on your serial connection to 115200, this is done
within your terminal program, and see if the output is legible. If not, try
all the speeds one by one.
-Original Message-
From: Funnell Giles [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 9:19 AM
To:
B Rudy 5/29/03 2:41:29 AM
Hey guys, I just got an offer to become a 2nd senior network engineer for
this company in Orange Country. Great News i know!!
Dilemma: I am a CCNP but have no local Area Nework Experience. Going to
be
workin with Catalyst 6500 switches. Also i have about 2 yrs
J B 5/29/03 8:39:15 AM
Hi, Everyone
I just been awarded the responsibility of installing 4 3745 Cisco routers.
The local phone company wanted $5500 dollars for the installation and my
employer thinks is to much. I was looking at the Cisco website for sample
configurations but I couldn't find
Group,
I am going to take ccna 3.0 as my ccna 1.0 has expired. Can anyone
please tell me the topics that I need to focus on? . I'm working on
routers for past 3 years
TIA
guru
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69772t=69772
Try different baud rates until the garbage becomes legible is my
guess. Your config-reg is likely changed though without a password it
is difficult to view.
Dave
Funnell Giles wrote:
Hi all,
I have just acquired a 3600 router. There seems to be a problem with the
console, whenever I
Need a lot more info than that, $5K might not be so bad after all,
the phone company needs to make a living too:)
Dave
J B wrote:
Hi, Everyone
I just been awarded the responsibility of installing 4 3745 Cisco routers.
The local phone company wanted $5500 dollars for the installation and
J B,
If you're familiar with Cisco routers, WAN troubleshooting (probably T1
or Frame) and QoS intricasies, then $5,500 is way too much. You could
set up the routers well within a single day, probably closer to 1/2 day.
If you're not familiar with Cisco routers, especially QoS since quality
Charles-
I could be wrong, but my interpretation of the doc's covering the Alias
command says that you can't have your cake and eat it too. :)
What I mean is, I don't believe you can DNS-Doctor and Destination-NAT
at the same time. Like I said, I could be wrong.
From what I understand, you need
Hi,
I really appreciate your help.:). Ill let you know about how i fared
tomorrwow. Thanks a zillion!!!
Regards
Shahryar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69777t=69644
--
FAQ, list archives, and subscription info:
description fo the 640-607 exam.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69778t=69772
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
John Neiberger wrote:
J B 5/29/03 8:39:15 AM
Hi, Everyone
I just been awarded the responsibility of installing 4 3745
Cisco routers.
The local phone company wanted $5500 dollars for the
installation and my
employer thinks is to much. I was looking at the Cisco
website for sample
Every job I've ever had has been that way! Of course you don't know it
now, but spend whatever time is necessary to get yourself there as
quickly as possible, and you'll be fine.
On Thu, 2003-05-29 at 00:52, B Rudy wrote:
Hey guys, I just got an offer to become a 2nd senior network
I believe that is a Gretzky quote..
Brian
- Original Message -
From: netman
To:
Sent: Thursday, May 29, 2003 6:10 AM
Subject: Re: Am I over my head guys? [7:69746]
When I left my last job (one that I liked) for this one, my boss gave me a
nice poster. It is a picture of a
(Watch for word wrap)
Guruprasad Sanjeevi wrote:
Group,
I am going to take ccna 3.0 as my ccna 1.0 has expired. Can anyone
please tell me the topics that I need to focus on? . I'm working on
routers for past 3 years
TIA
guru
Message Posted at:
Look at the CCNA blueprint on the Cisco website for the most accurate
description of topics that will be covered. See the following link (watch
for wrap):
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_exam
s/640-607.html
Shawn K.
-Original Message-
From:
The URL was stripped from the earlier post:
http://www.cisco.com/warp/public/10/wwtraining/
certprog/testing/current_exams/640-607.html
Tom Martin wrote:
(Watch for word wrap)
Guruprasad Sanjeevi wrote:
Group,
I am going to take ccna 3.0 as my ccna 1.0 has expired. Can anyone
please
Tom Martin wrote:
Raj,
Is the software going to be open source? I have a large
collection of
scripts for automating configuration (during rollouts) and
basic
troubleshooting. I've had intentions of providing a GUI
front-end at
some point, either in Java or PHP, but never seem to have
J B wrote:
John Neiberger wrote:
J B 5/29/03 8:39:15 AM
Hi, Everyone
I just been awarded the responsibility of installing 4 3745
Cisco routers.
The local phone company wanted $5500 dollars for the
installation and my
employer thinks is to much. I was looking at the Cisco
hmm, let's not forget we're not routing just for the routing sake. There is
much
more then just setting up these few routers to make them talk to each other.
What will be routed data wise, what type of connectivity, applications,
topology, protocols, business requirements, etc, etc.
If you
All,
I'd try this myself if I had a router at my fingertips...
1. I'd like to apply LLQ for my VoIP traffic over a site to site VPN using
Cisco's Modular QoS technique. Will the router bark if I try to apply my
output service policy to the tunnel interface? Or do I need to apply it to
the
Good questions. I wish some others would pipe in so you would get a bigger
sample space, but I'll pipe in since nobody else did yet!
What do the rest of you think? The exec summary is that we're wondering how
common it is to adjust host MTU to avoid fragmentation with VPN and IPSec.
See
Hi Folks,
I need a few ideas on the following problem.
I have a PIX with a number of interfaces, one of the interfaces on this PIX
is connected to a local director via a crossover cable.
The second interface on the local director is connected into a vlan'd
switch. Connected into the same
Can someone tell me what IOS and whether it is IP or IP Plus I should be
running othe NM-4T1-IMA on a 2620?
Thanks,
Mario Puras
SoluNet Technical Support
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69793t=69793
--
FAQ,
I am having trouble tring to connect to our corp lan. I have a windows 2000
vpn server and have verified that it works internally. The problem I face
is setup on the cisco 2611. How do allow gre port 47 to pass through the
router. I believe this is the issue. The Cisco IOS Release is
Howard,
I would appreciate your view and the group on which one you guys would
prefer, Tag switching or Multicasting. We having been running into problems
with doing multiple windows XP imaging that can only handle up to 8
computers at a time. Multicast is enable at the layer 2 3 but still can't
Call qwest and you'll get Dave out there...:)
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
MADMAN
Sent: Thursday, May 29, 2003 8:07 AM
To: [EMAIL PROTECTED]
Subject: Re: Help with Cisco 3745 configuration [7:69765]
You cant win if you don't play!!!
I thought I was in the same boat when I came to cisco,
And I have been here 3 years...
If you don't try, you wont know where you fit
And you have the best support team in the world on this list...
Larry Letterman
Cisco Systems
-Original
B Rudy wrote:
Hey guys, I just got an offer to become a 2nd senior network
engineer for this company in Orange Country. Great News i know!!
Dilemma: I am a CCNP but have no local Area Nework
Experience. Going to be workin with Catalyst 6500 switches.
Also i have about 2 yrs working
I've got one in a 2620 running c2600-is-mz.120-7.T2
On Thu, May 29, 2003 at 04:59:52PM +, [EMAIL PROTECTED] wrote:
Can someone tell me what IOS and whether it is IP or IP Plus I should be
running othe NM-4T1-IMA on a 2620?
Thanks,
Mario Puras
SoluNet Technical Support
--
Priscilla,
I've found that CDP works great for identifying transit Ethernet
switches since CDP details IP addresses, and suprisingly picks up more
that just Cisco equipment. I've noticed HP switches providing CDP, but
most of the networks I work with are primarily Cisco. One of the
biggest
I have a project where I need to connect a Nortel Passport 8600 to two Cisco
6500. What would be the best way to make connection?
Thank you for any help.
Sam
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69798t=69798
--
FAQ,
If you have a cisco.com logging take a look at the Software Advisor..
Click on Technical Support, Software Center, and under Software Utilities
you will see Software Advisor.
A new window will pop up.. Click on the Software Support for Hardware Tab.
Enter your 2600 for your Product Family, just
Here's my two cents.
I am assuming you interviewed for this position. Probably in person. There
are two possibilities.
1) You misrepresented yourself and made them think you have greater skills
than you do ( and this would be stupid because if you get a job that you
just aren't prepared for
Want a laugh.. I was installing Redhat 8 (graphical install)
during the install was an advertisement for the RHCE. I would
like REDHAT to answer this...
If your RHCE is so great (Top Overall IT Certification), then
why is a Cat6k (sup1/2 clearly visible) in the background ?
check out these
I am getting the following error
6d20h: %SYS-5-CONFIG_I: Configured from console !e
6d21h: EZVPN(hw2): Current State: READY
6d21h: EZVPN(hw2): Event: RESET
6d21h: EZVPN(hw2): ezvpn_close
6d21h: EZVPN(hw2): New State: CONNECT_REQUIRED
6d21h: EZVPN(hw2): Current State: CONNECT_REQUIRED
The problem with the software advisor is that it does not tell you if you
need IP or IP Plus or whatever else. I found out that I do need IP Plus (IP
does not recognize the card) but it sure would be nice for them to tell you
on the software advisory. I went ahead and filled out a feedback form.
Plus
Dave
[EMAIL PROTECTED] wrote:
Can someone tell me what IOS and whether it is IP or IP Plus I should be
running othe NM-4T1-IMA on a 2620?
Thanks,
Mario Puras
SoluNet Technical Support
--
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
At 05:24 PM 5/29/2003 +, Kazan, Naim wrote:
Howard,
I would appreciate your view and the group on which one you guys would
prefer, Tag switching or Multicasting. We having been running into problems
with doing multiple windows XP imaging that can only handle up to 8
computers at a time.
Priscilla,
I've found that CDP works great for identifying transit Ethernet
switches since CDP details IP addresses, and suprisingly picks up more
that just Cisco equipment. I've noticed HP switches providing CDP, but
most of the networks I work with are primarily Cisco. One of the
biggest
Salvatore De Luca wrote in message ...
I am inquiring about the internal physical bus layout on the
6509. I have Dual supes, w/ MSFC2's, running SRM HA, but my
quesion relies specifically on slot 6 and slot 9. I am using CATOS
6.3.5 and MSFC IOS 12.1.(8). Do these 2 slots work on seperate
Well I passed the exam, ccnp recert today, it was close, man what a pain. I
only studied a week and a half and mostly labbed my work. Considering I have
not touched a cisco router or done much cisco work since my first ccie lab
attempt last september(I was burnt out of cisco and sick of it) I
Does anybody have used or refurbished 3550 SMI or EMI Switches for sale?
please
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69563t=69563
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
try
access-list 124 permit gre any host 192.168.1.180
GRE is it's own protocol.
-Original Message-
From: Steve Collins [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 9:47 AM
To: [EMAIL PROTECTED]
Subject: Windows VPN through Cisco 2611 HELP!!! [7:69788]
I am having trouble
At 07:52 AM 5/29/2003 +, B Rudy wrote:
Hey guys, I just got an offer to become a 2nd senior network engineer for
this company in Orange Country. Great News i know!!
Dilemma: I am a CCNP but have no local Area Nework Experience. Going to be
workin with Catalyst 6500 switches. Also i have
The other option it to buy and old PBX, normally cheaper than an ISDN
simulator, and then you can do it for real. I have seen a couple on ebay
for £200-£300. This would also allow you to do VOIP, etec
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69659t=69540
I would think that the uBR is about the cheapest entry you could get (you
can pick them up off ebay for about £60). The uBR has 2 phone ports each,
but my understanding is that one of these would normally connect to a
standard PSTN port, that way if you have an IP outage you will still have a
Some off-the-cuff comments.
1) I don't know all the ports that you should have open.
2) In ACL 124 you are permitting gre to your Ethernet interface address -
which in turn is NATed by port to several inside hosts. You are not being
specific enough about which box is the vpn server. Can you
GDay Everyone,
Anyone here use IPexpert's Ultimate Preparation
Workbook for the Cisco. CCIET Routing and Switching Laboratory Exam (4.0)?
If so how does this book stack up with other lab workbooks. Basically I am
getting feedback to see if this is really worth the
Glad to help !!
Hope it was worth it towards your BGP learning process and towards your
CCIP!!
Based on the many Cisco exams that I have taken, BGP was the most
extensive and thorough exam (becoz' it is a beta) but it does really test
your knowledge on it, right?
And the second most difficult
I can't help you, but I have been told by a Nortel engenieer that they have
tested that configuration in the lab and it worked (I think, they were using
multitrunking in the 8600 and FEC in Catalyst)
The only problem is that if you have a problem with that configuration, nor
cisco or nortel will
Joseph,
I noticed that too, but never really thought about it. I browsed the
article (http://www.certmag.com/issues/jan02/feature_sosbe.cfm). Figure
4, 6 and 9 all rank RHCE at the top.
If a well-known third party ranked your certification as overall best
overall quality, I'm sure you'd
Robert/Nikolai, thanks for the suggestions, I think one of my problems with
going down that route will be that this telco (British Telecom) just hold
their hands up when you even say the word 'router' and say Nothing to do
with us mate, our end to end test shows total connectivity up to our
Look as long as you didn't BS in the interview or resume, they should know
what to expect. If you talk the talk, can you walk the walk, they must think
so, if you've got 2 years of actual work experience you have more than me (
I only have my study experience adn home lab) . I'd say, go for it. I
At 4:57 PM + 5/29/03, Priscilla Oppenheimer wrote:
Good questions. I wish some others would pipe in so you would get a bigger
sample space, but I'll pipe in since nobody else did yet!
What do the rest of you think? The exec summary is that we're wondering how
common it is to adjust host MTU
PIX 515
PIX Version 6.3(1)
interface ethernet0 10full
interface ethernet1 10full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname HQ-PIX
domain-name xxx.org
fixup protocol ftp 21
fixup
On 5/24/03 6:53 PM, in article [EMAIL PROTECTED],
Jack Nalbandian wrote:
My opinion on the matter remains the same: a bachelors is
functionally overrated by the typical manager.
It depends on what you think the degree says. It doesn't say I know the
Cisco CLI like the back of my hand. But
At 1:24 PM -0400 5/29/03, Kazan, Naim wrote:
Howard,
I would appreciate your view and the group on which one you guys would
prefer, Tag switching or Multicasting.
I'm not really sure what you are trying to do. You can multicast with
or without tag switching/MPLS. I'm not a Windows person, so
Thanks, now how much of a cut do you want Larry!!
Dave
Larry Letterman wrote:
Call qwest and you'll get Dave out there...:)
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
MADMAN
Sent: Thursday, May 29,
The info is in the sotware feature navigator and the release notes.
Dave
[EMAIL PROTECTED] wrote:
The problem with the software advisor is that it does not tell you if you
need IP or IP Plus or whatever else. I found out that I do need IP Plus
(IP
does not recognize the card) but it sure
Here is a question to which I have not been able to find a definitive
answer. Assume the following. In a default configuration, you are asked to
configure DLSW for 50% of the interfaces bandwidth, IP traffic should
receive 25% of the interface bandwidth, and all other traffic should use the
thanks for the feedback. to add a little more insight, bandwidth is
more expensive in de than in the u.s., so we are using adsl. our de
facilities use adsl with t-1 speeds for downloads but only 160kbps for
uploads. the de site in question is hosting an ftp server that u.s.
users access to
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
John Neiberger
Sent: Thursday, May 29, 2003 9:36 AM
To: [EMAIL PROTECTED]
Subject: Re: Am I over my head guys? [7:69746]
B Rudy 5/29/03 2:41:29 AM
Hey guys, I just got an offer to become a 2nd senior network
I tried that and still no go. Thanks anyway. Any other ideas?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69830t=69788
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Just one thing to clarify before telling my comments
%75 percent is not valid for F/R ( in F/R you use mincir, if mincir NOT
configured then you use CIR/2)
I have tested this some time ago, however if I am not wrong it should be
like this:
In your question I am assuming that, this is not a F/R
Thanks Henry,
That's exactly what I want to do. If I stopped doing Cisco is because my
job didn't required hands on. I want to re-learn the skills and technology;
that is the only way to get back in track. Believe I would tell my manager
to let the phone company do the job, but if I do that
the reason i'm setting this up is to eliminate pc anywhere and the ip
addresses on the post are bogus. The inside nat address of the vpn server
is 192.168.1.180. I also have another nic with a public address. What is
the point of two nic cards? this may be a stupid question but should the
Thank you so much.
I never thought that the uBR-294 has that the PSTN back up function
built-in.
Is there a better rotuer alternative to the uBR-924? What would be the pros
and cons of the uBR-924?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69834t=69477
CBWFQing is a rough and ready approach which DOES work statistically
over a large enough sample time.
You have to understand that it only starts to work when there is
congestion on the link.
Using your example, IIRC,
when there is 50% of DLSW traffic and 25% of IP traffic,
then, the DLSW
Fast Ethernet to both 6500's. Not sure exactly what the question is?
Does the 8600 no have a Fast Ethernet card installed or is it OC3 or
something.
Ronnie
Owens Samuel wrote in message
news:[EMAIL PROTECTED]
I have a project where I need to connect a Nortel Passport 8600 to two
Cisco
6500.
None...
Just be available when I need help...:)
Larry Letterman
Cisco Systems
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 1:05 PM
To: Larry Letterman
Cc: [EMAIL PROTECTED]
Subject: Re: Help with Cisco 3745 configuration [7:69765]
Steve,
we have a public address that gets natted to the private address of our pptp
server. external users open a vpn session to the external address then the
pix nats it to the internal address. an inbound access list on the outside
interface permits gre and tcp 1723 hosts external address then
Mary,
Ok I see your configs.
Can I ask how you have this set up?
PIX's, routers etc and how they are connected.
My initial concern is that some of your external ip's are private
(192.168.1.2) on PIX506.
Try this test first of all to ensure basic connectivity from the command
line of each PIX
Maximus wrote:
oops i meant gre.
replace esp with gre; should read:
access-list 124 permit gre host (insert external vpn nic IP
address) host 216.100.100.130
try:
access-list 124 permit gre host (insert external vpn nic IP
address) host
216.100.100.130
- Original Message -
I am currently studying for my wireless specialization, wondering if anyone
has taken the new test for Feild engineers, and which of the three major
topics is covered the most on the test. I have a great grasp on the AP
configuration,fundamentals. But I have no access to any bridges? Any
At 6:57 PM + 5/29/03, Peter van Oene wrote:
I get through most days very much like a duck; calm in appearance, but
scrambling like crazy underneath to keep things afloat.
Peter, you are causing metaphors to loop in the network of my brain.
When I was a Boy Scout practicing silent movement
Hi All,
Thanks for all your input! :D
· Yes! the code is full open source. This program was actually some rd for
work. We thought we can help the networking community by releasing this to
the public.
* The program needs the following commands to be executed :
-terminal
Same, not the same?
From what I am reading, Clear trunk will deny the VLAN from the trunk.
VTP Pruning will do the same but also mentioned host broadcast
suppression.
Also I have read pruning is dynamic, where clearing is static.
Thanks!
Message Posted at:
I think it really depends on others around you and the team
environment...
I applied for and took a job that required a CCNA/CCNP + MCSE
certification. I have mostly worked for network shops that used *NIX
verses NT, however I had a taken all of the 4.0 courses back in the day.
I knew I wasn't
Hi,
Looks like a baud rate mismatch.
Can you please check what's the baud settings both at the Rom Monitor
and the console login .
Cheers
vathsan
-Original Message-
From: Funnell Giles [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 6:49 PM
To: [EMAIL PROTECTED]
Subject:
This works fine. Use 802.1q as the VLAN trunking/tag
protocol if you're doing a VLAN trunk between the
switches. The native/default VLAN on both switch ports
has to be the same VLAN.
If it's not a VLAN trunk, then you can just use a
cross over cable between the two.
I don't think
Dear All,
I need some expert comments from this group for my problem. The router is in
working condition and 3 links are working fine on this router. Now I need to
do some changes in the router configuration. After changing and saving the
configuration, I gave a reboot to the router. But I
Hi Guys,
Its all released. Download the software from the following link. We have
included a make file to ease in installation.
Any questions, check the README file and then email us.
http://mlp-consulting.com.au/Cisco-ShowIPRoute-Parser-1.01.tar.gz
Raj
Message Posted at:
Hi there,
I have a PIX 515E. I am trying to use PDM on it. The configuration is IOS
version 6.0 and PDM version 1.0. The client is Windows 2000 with IE 6.0 and
all the service packs intalled. When I try connecting to the PIX via the
browser, somehow it just doesn't work. Everything else seems to
I took and passed this test last week. Got an 87 which I was happy with. I
took the CWNA exam by planet 3 the week before the Cisco and found that this
was nearly sufficient for me to pass. What I am getting at is that I got
between 5 and 10 questions on Cisco kit and the rest on WLAN theory. All
Hi Garret,
I've some experience of this also. With TCP, the don't fragment bit is set
so when a 1500 byte frame hits the VPN tunnel, the VPN device sends an ICMP
message back to the host saying I need to fragment your packet but you are
telling me not to fragment because it needs to add extra
1 - 100 of 108 matches
Mail list logo