Hi,
I have an Athlon 64. I want to know if I can
install a Mandrake 9.2 i586 on that. I have to do this becouse I couldn't find a
grapfic driver for Mandrake for 64 bit for my video cardand I'm trying to
work with one older. For 9.2 for 32 bit I found already a driver.
thanks
gica
On Thu, 2004-06-17 at 13:54, Anguo wrote:
Hello,
I have 9.2 which is fairly customized and I don't really
want to loose all this with a fresh 10.0 install. I WILL
back up and make notes on the most important stuff I have
in /usr and /var that would be lost during a reformating of
the
Hello,
I have 9.2 which is fairly customized and I don't really
want to loose all this with a fresh 10.0 install. I WILL
back up and make notes on the most important stuff I have
in /usr and /var that would be lost during a reformating of
the drive, but a flawless upgrade would make many
Hello everyone! I've recently downloaded mandrake 9.2 and trying to install
it to my amd 64
3400+ system. My problem is with serial hard drive. It doesn't recognize my
Maxtor's
Diamond plus 9 SATA 120GB hard drive. It uses Promise's SATA 378 ide
controller. And maxtor
doesn't provide any linux
I had my Mandrake 9.2 box running with Evolution open, checking some e-mail
accounts. I had a freeze of Evolution, so I tried a reboot. Now it goes to
a Grub prompt and stops there. Is there anything I can do to get back into
Linux?
Thank you,
--
Kevin B. O'Brien TANSTAAFL
[EMAIL
Hello,
Sorry for the stupid question:
I am unable to update my Mandrake 9.2 install. Here is the error
message:
Unable to update medium, it will be automatically disabled.
Errors:
retrieve of source hdlist (or synthesis) failed
no hdlist file found for source update_source
problem reading
On Fri, 2004-01-30 at 17:53, Michael Begin wrote:
Hello,
Sorry for the stupid question:
I am unable to update my Mandrake 9.2 install. Here is the error
message:
Unable to update medium, it will be automatically disabled.
Errors:
retrieve of source hdlist (or synthesis) failed
no
On Friday 30 January 2004 02:53 pm, Michael Begin wrote:
Hello,
Sorry for the stupid question:
I am unable to update my Mandrake 9.2 install. Here is the error
message:
Unable to update medium, it will be automatically disabled.
Errors:
retrieve of source hdlist (or synthesis) failed
- Original Message -
From: Greg Meyer [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 30, 2004 14:37
Subject: Re: [newbie] Mandrake 9.2 Updates
On Friday 30 January 2004 02:53 pm, Michael Begin wrote:
Hello,
Sorry for the stupid question:
I am unable to update
Hi all,
I recently built a desktop machine with Mandrake 9.2. I used Mandrake Update
to update the system, including all the latest security fixes, bug fixes and
updates. All appeared to go well, but now, I've lost most of the
applications that were formerly listed in my menu, my icons in the
On Tuesday 13 Jan 2004 1:33 pm, Smith, Robert A wrote:
Hi all,
I recently built a desktop machine with Mandrake 9.2. I used Mandrake
Update to update the system, including all the latest security fixes, bug
fixes and updates. All appeared to go well, but now, I've lost most of the
- Original Message -
From: Toth Bela [EMAIL PROTECTED]
To: mandrake [EMAIL PROTECTED]
Sent: Sunday, January 04, 2004 1:52 AM
Subject: Re: [newbie] Mandrake 9.2 and Hauppauge pvr-250
Hi!
I first (at the first probe) try use hardrake, but this was in the
command line when I try run
I'm having difficulty with the Mandrake 9.2 version of gcvs. I
installed both it and the version of cvs that come on the distribution.
When I try to set preferences, gcvs complains something like
alternate cvs does not support gui redirection. I remembered from the
last time I used this
On Sunday 04 January 2004 06:52 am, Toth Bela wrote:
Hi!
I first (at the first probe) try use hardrake, but this was in the
command line when I try run detect in hardrake (I have a ATI Radeon 9200
video card):
WARNING: Your X-Server has no DGA support.
can't open /dev/v4l/video0: No such
ed is gonna post 'inline',,, so get over it, or hit delete now
On Friday 02 January 2004 08:15 pm, Toth Bela wrote:
Hi!
I have a Hauppauge WinTV pvr-250 video recorder (model 986) with Epox
8k9a motherboard. I try install this card under Mandrake Linux 9.2
Download version, but something
On Friday 26 December 2003 02:34, Ramin M wrote:
Apparantly the USB modules are already loaded in the running
kernel and i did not have to recompile the kernel.
I could configure and start using my multi-reader USB card under
linux. I am not sure what i did! But i think it was just that i
Thanks David for the tip. I willcheck if i need to recompile the kernel for usb support. I hope not because i am not that knowledgeable in these.
Regards, RaminDavid [EMAIL PROTECTED] wrote:
Post your free ad now! Yahoo! Canada Personals
On Mon, 22 Dec 2003 20:38:50 -0600
Dennis Myers [EMAIL PROTECTED] wrote:
Joe, in the append line it is acpi=ht
That's the way it it is now, so it's already disabled? I did some quick Googling
and it seemed to indicate switching it to acpi=off.
:-\
--
JoeHill ++ ICQ # 280779813
Registered
Still waiting to install 9.2 but after reading all the problems with 9.2 I
am undecided. Any feedback on this would be helpfull.
- Original Message -
From: Ramin M [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, December 22, 2003 11:55 PM
Subject: Solved: [newbie] mandrake 9.2
I simply did this through the hardware control center where it has an
option for activating/disactivating ACPI. The output is /etc/lilo/conf
is acpi=ht.
Regards, Ramin
--- JoeHill [EMAIL PROTECTED] wrote: On Mon, 22 Dec 2003
18:55:58 -0500 (EST)
Ramin M [EMAIL PROTECTED] wrote:
I
Joe, in the append line it is acpi=ht
That's the way it it is now, so it's already disabled? I did some
quick Googling and it seemed to indicate switching it to acpi=off.
Here is what i turned up on the ht thing:
acpi=ht will use ACPI for enumerating processors, and then ACPI
will exit.
PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, December 22, 2003 11:55 PM
Subject: Solved: [newbie] mandrake 9.2 freezes so often
Hi,
I finally found the source of the problem! It was not because of
dri
module as E. Hines suggested. I just disabled the ACPI at boot time
and
now
I've had the same problem. I installed 9.2 download edition, then
installed security and bugfixes through MCC (but not the kernel, since I
don't have an LG drive), and experienced three system freezes in a row.
Since other MDK releases were rock solid, and it was the first time that
I tried
Hi,
I finally found the source of the problem! It was not because of dri
module as E. Hines suggested. I just disabled the ACPI at boot time and
now all the freezings are gone!
Now i can feel the strength of 9.2! It is so fast; it seems even
faster that windows XP. Konqueror has seen a
On Mon, 22 Dec 2003 18:55:58 -0500 (EST)
Ramin M [EMAIL PROTECTED] wrote:
I finally found the source of the problem! It was not because of dri
module as E. Hines suggested. I just disabled the ACPI at boot time and
now all the freezings are gone!
Now i can feel the strength of 9.2! It is
On Monday 22 December 2003 07:40 pm, JoeHill wrote:
On Mon, 22 Dec 2003 18:55:58 -0500 (EST)
Ramin M [EMAIL PROTECTED] wrote:
I finally found the source of the problem! It was not because of dri
module as E. Hines suggested. I just disabled the ACPI at boot time and
now all the
With 9.1, I haven't had any problem with the Nvidia drivers, but my cards are
all at least a year old, so I can't guarantee what happens with the newest
hardware. I've been using the proprietary Nvidia drivers for a couple of
years now, with cards from the old TNT to GeForce (depending on
E. Hines wrote:
With 9.1, I haven't had any problem with the Nvidia drivers, but my cards are
all at least a year old, so I can't guarantee what happens with the newest
hardware. I've been using the proprietary Nvidia drivers for a couple of
years now, with cards from the old TNT to GeForce
On Sunday 21 December 2003 11:41 am, robin wrote:
E. Hines wrote:
With 9.1, I haven't had any problem with the Nvidia drivers, but my cards
are all at least a year old, so I can't guarantee what happens with the
newest hardware. I've been using the proprietary Nvidia drivers for a
couple
--- et [EMAIL PROTECTED] wrote: On Sunday 21
but back to the problem in the subject line.
turn off 'plug and pray aware' OS in BIOS.
Sorry, is this in reply to my problem? Why should i
turn off this in BIOS?
Regards, Regards, Ramin
On Sunday 21 December 2003 10:36 pm, Ramin M wrote:
--- et [EMAIL PROTECTED] wrote: On Sunday 21
but back to the problem in the subject line.
turn off 'plug and pray aware' OS in BIOS.
Sorry, is this in reply to my problem? Why should i
turn off this in BIOS?
Regards, Regards,
It is getting better now as the lockup´s are less
frequent than before but still they happen. A few
minutes ago, i was typing a message that the OS
suddenly rebooted the machine with no apparant reason!
Yes i am dual booting with windows.
Regards, Ramin
--- jason pearl [EMAIL PROTECTED]
--- E. Hines [EMAIL PROTECTED] wrote: On Friday
Have any other users out there noticed that the
/home/username directory isn't
user writable after installation? I haven't seen
that one before (and I
installed 9.2 on a friends laptop last week).
The lockups are happening less than
I have heard that nvidia graphic cards usually work
better under linux and mandrake already includes them
in the power pack version like the ati drivers. Do you
know about if they are trouble free unlike the ati
cards? I am thinking to buy one and sell out my ati
card. Financially this is not much
Hi,
I am new to the list and mandrake. More than a year
ago, i tried with mandrake 9.0 for a short time and
decided that i prefered suse.
Recently i decided to try mandrake once again. I
became a silver member of mandrake club and downlowd
the powerpack 3 CD version and installed it. The
On Fri, 2003-12-19 at 19:54, Ramin M wrote:
Hi,
I am new to the list and mandrake. More than a year
ago, i tried with mandrake 9.0 for a short time and
decided that i prefered suse.
Recently i decided to try mandrake once again. I
became a silver member of mandrake club and downlowd
On Friday 19 December 2003 06:54 pm, Ramin M wrote:
Hi,
I am new to the list and mandrake. More than a year
ago, i tried with mandrake 9.0 for a short time and
decided that i prefered suse.
Recently i decided to try mandrake once again. I
became a silver member of mandrake club and
I am not terribly good with linux
- I ran Red Hat for a while and then with all this fedora BS desided to move over to Mandrake. The install went great -
the only issues are that a) My Sound Blaster Live Platnum
produces no sound and My ATI All In Wonder Pro doesn't
seem to be reconized as
On Sunday 14 Dec 2003 10:52 pm, Chymmylt Bwoid wrote:
The main problem is I can't get mandrake to find the internet. I have a
cablemodem (opt Online) plugged into a linksys router. Themachine worked
fine in it's last config(WinXP Pro and Redhat 9 -dual boot - both OS's
found the net find)
I
On Sunday 14 December 2003 04:52 pm, Chymmylt Bwoid wrote:
snip terribly good with linux- I ran Red Hat for a while and then with all
this
fedora BS desided to move over to Mandrake. The install went great -the
only issues are that a) My Sound Blaster Live Platnumproduces no sound and
My ATI
On Thursday 04 December 2003 05:22 am, Charlie Mahan wrote:
Thursday 04 December 2003 8:11 am, Ronald J. Hall wrote:
On Thursday 04 December 2003 09:50 am, Dan Gordon wrote:
DG To check the iso's download the md5sum file from the ftp
site, I dont DG remember how to use the file but it
On Thu, 4 Dec 2003 05:57:17 -0800 (PST)
Tango Echo [EMAIL PROTECTED] wrote:
error in exec of stage2 :-(
trying to execute '/usr/bin/runinstall2' from the
installation volume,
the following fatal error occurred
FATAL ERROR IN STAGE1: I/0 error
I can't recover from this.
You may reboot your
On Thursday 04 December 2003 02:50 pm, Dan Gordon wrote:
On Thu, 4 Dec 2003 05:57:17 -0800 (PST)
Tango Echo [EMAIL PROTECTED] wrote:
error in exec of stage2 :-(
trying to execute '/usr/bin/runinstall2' from the
installation volume,
the following fatal error occurred
FATAL ERROR IN
On Thursday 04 December 2003 09:50 am, Dan Gordon wrote:
DG To check the iso's download the md5sum file from the ftp site, I dont
DG remember how to use the file but it checks the iso's to verify proper
DG size and stuff. I had the same problem but i got hold of a bad batch of
DG cheap cd's
Dan Gordon wrote:
On Thu, 4 Dec 2003 05:57:17 -0800 (PST)
Tango Echo [EMAIL PROTECTED] wrote:
error in exec of stage2 :-(
trying to execute '/usr/bin/runinstall2' from the
installation volume,
the following fatal error occurred
FATAL ERROR IN STAGE1: I/0 error
I can't recover from this.
You
Hi all,
I just downloaded Mandrake 9.2 and tried to install.
I am brought to the inital splash screen where I hit
Enter to continue. Next I see the text fly by but am
stopped by this error:
error in exec of stage2 :-(
trying to execute '/usr/bin/runinstall2' from the
installation volume,
the
Happened to me also with the downloaded images, more or less the same
error. I powered off and tried again and it worked ok. I had to repeat
the installation the day after, this time it worked immediately ok.
I don't know what happened. The system is an oldish AMDK6-2/550 with
128Mbyte RAM,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thursday 04 December 2003 8:11 am, Ronald J. Hall wrote:
On Thursday 04 December 2003 09:50 am, Dan Gordon wrote:
DG To check the iso's download the md5sum file from the ftp site, I dont
DG remember how to use the file but it checks the iso's to
On Monday 01 Dec 2003 4:45 am, Teilhard Knight wrote:
SNIP
Thanks a lot, Derek. It seems everything is set now. I still do not get
into Internet, though. First, as you said, iwconfig gives:
wlan0 IEEE 802.11-DS ESSID:2WIRE193 Nickname:castillo.nuthouse.nut
Mode:Managed Channel:6 Access
On Monday 01 Dec 2003 4:45 am, Teilhard Knight wrote:
snip
iwconfig gives:
wlan0 IEEE 802.11-DS ESSID:2WIRE193 Nickname:castillo.nuthouse.nut
Mode:Managed Channel:6 Access Point: 00:0D:72:17:AA:E9
DEVICE=wlan0
IPADDR=172.16.1.34
NETWORK=172.16.0.1
For NETWORK, I wrote the router
On Sunday 30 Nov 2003 6:40 am, Teilhard Knight wrote:
On Saturday 29 Nov 2003 7:44 pm, Teilhard Knight wrote:
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved
them.
I am trying to configure a
On Sunday 30 Nov 2003 5:38 am, Rob Blomquist wrote:
SNIP
Here is the section of your boot log that shows it being dealt with:
Nov 29 18:23:04 castillo /etc/hotplug/usb.agent: Setup usbvnet_rfmd
at76c503-rfmd for USB product d5c/a002/100
Note here that it is selecting the at76c503 module,
Everything for Mandrake and Gnome are gone. I still have KDE so I can
still activate things and use the OS to a degree. But things like...
Mandrake Control Center 9.2, Configure your computer, HardDrake,
DrakConf ( sorry if I'm repeating things these are just my visual
methods of reaching a
On Sunday 30 November 2003 15:40, Derek Jennings wrote:
SNIP
When you type iwconfig and see eth0 appear that tells me that the
atmelwlandriver has been loaded. (It uses eth0 by default) If the
at76c503c driver was loaded the device would be called wlan0
Follow the advice in my
On Sunday 30 Nov 2003 5:10 pm, H.J.Bathoorn wrote:
On Sunday 30 November 2003 15:40, Derek Jennings wrote:
SNIP
When you type iwconfig and see eth0 appear that tells me that the
atmelwlandriver has been loaded. (It uses eth0 by default) If the
at76c503c driver was loaded the device
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Greg,
On Sunday, November 30, 2003, at 6:34:06 AM PST, you wrote:
Have you applied any updates to the system. It sounds like the menu
disappearing bug has bitten you. Try running 'update-menus -v' as
root and see if that fixes it.
I was
- Original Message -
From: Derek Jennings [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, November 30, 2003 8:40 AM
Subject: Re: [newbie] Mandrake 9.2
SNIP
When you type iwconfig and see eth0 appear that tells me that the
atmelwlandriver has been loaded. (It uses eth0
SNIP
When you type iwconfig and see eth0 appear that tells me that the
atmelwlandriver has been loaded. (It uses eth0 by default) If the
at76c503c driver was loaded the device would be called wlan0
Follow the advice in my workaround and it will work.
All you have to do is move the
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved them.
I am trying to configure a wireless internet access on a desktop computer by
means of an SMS2662W USB adaptor On Mandrake 9.2.
Derek advised me to use
On Saturday 29 Nov 2003 7:44 pm, Teilhard Knight wrote:
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved them.
I am trying to configure a wireless internet access on a desktop computer
by means of an
On Saturday 29 November 2003 11:44 am, Teilhard Knight wrote:
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved them.
I am trying to configure a wireless internet access on a desktop
computer
by means
On Saturday 29 November 2003 6:52 pm, Teilhard Knight wrote:
On Saturday 29 November 2003 11:44 am, Teilhard Knight wrote:
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved
them.
I am trying to
On Saturday 29 Nov 2003 7:44 pm, Teilhard Knight wrote:
I posed this question before and I was greatly helped by Derek. I had
problems in Windows XP, and two months have passed before I solved them.
I am trying to configure a wireless internet access on a desktop
computer
by means of an
Does anyone know how to get the Highpoint HPT374 Raid device to work
during the Mandrake 9.2 installation.
I need it to recognise my raid array attached to the HPT374 device. i
have a Abit AT7MAX2 motherboard which has an on oard hpt374 raid device.
on this I have attached 2 80 GB Maxtor HDs,
Well, I did manage to narrow it down, it is definitely an issue with the HPT
372 controller card and Mandrake 9.2. 9.2 just will NOT boot with the RAID
controller enabled in the BIOS, I tried just about every option that I know
of on the lilo screen, including noapic, nolapic, ide=reverse,
Well, I rsynced the Mandrake 9.2 directories to my local machine last night
including the ISO images. I burned them this morning, tried to boot to run
an upgrade and I get a kernel panic every time, right after it tries to load
the two primary hard drives attached to the HPT372 controller.
On Friday 21 November 2003 08:29 pm, Bryan Phinney wrote:
Well, I rsynced the Mandrake 9.2 directories to my local machine last night
including the ISO images. I burned them this morning, tried to boot to run
an upgrade and I get a kernel panic every time, right after it tries to
load the two
On Saturday 15 November 2003 08:54 am, [EMAIL PROTECTED] wrote:
The boot stops at Starting ALSA 0.9.6. This is the same problem that
I had with 9.1 which was solved with the help of this list.
Unfortunately, I don't remember what the solution was! Please help. . .
Rich
Do you have any USM
The boot stops at Starting ALSA 0.9.6. This is the same problem that I had with 9.1 which was solved with the help of this list. Unfortunately, I don't remember what the solution was! Please help. . .
Rich
--
[EMAIL PROTECTED]
On Saturday 15 November 2003 17:54, [EMAIL PROTECTED] wrote:
The boot stops at Starting ALSA 0.9.6. This is the same problem
that I had with 9.1 which was solved with the help of this list.
Unfortunately, I don't remember what the solution was! Please help.
. .
Rich
When asked during
On Sat, 2003-11-15 at 12:50, Frans Ketelaars wrote:
On Saturday 15 November 2003 17:54, [EMAIL PROTECTED] wrote:
The boot stops at Starting ALSA 0.9.6. This is the same problem
that I had with 9.1 which was solved with the help of this list.
Unfortunately, I don't remember what the
Mark Tiller wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of et
Sent: 08 November 2003 20:51
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Mandrake 9.2 How do I leave NT Boot loader.
I don't do a thing, and tell lilo to boot from hda, you will get
Has anyone ever made a Mandrake webcam server? Then, the only
thing left running on Winsux qwould be the Tax Software. Seems
like every upgrade/release his margin (reason for being) gets a
little slimmer .
Other than a firmware upgrade, Tax software is the only thing that
might force me to
Has anyone ever made a Mandrake webcam server?
I could not get a Linux driver for my _really_ obscure webcam. I could
not get the winblows software to work with wine so in the end I bunged
XP on a old Digital Ppro 200 and networking it to my server. XP seems to
be able to manage it and it
On Saturday 08 Nov 2003 7:54 am, Eric Huff wrote:
Has anyone ever made a Mandrake webcam server? Then, the only
thing left running on Winsux qwould be the Tax Software. Seems
like every upgrade/release his margin (reason for being) gets a
little slimmer .
Other than a firmware
Hi all,
Because I have various flavours of windows installed selected using the
NT/XP bootloader. I'd prefer to keep using it and just have one boot
loader.
Now I know how to add Linux to the NT boot loader, but how do I stop the MDK
9.2 installer from overwriting the boot sector on HDA?
Any
On Saturday 08 November 2003 08:46 pm, Mark Tiller wrote:
Hi all,
Because I have various flavours of windows installed selected using the
NT/XP bootloader. I'd prefer to keep using it and just have one boot
loader.
Now I know how to add Linux to the NT boot loader, but how do I stop the
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of et
Sent: 08 November 2003 20:51
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Mandrake 9.2 How do I leave NT Boot loader.
I don't do a thing, and tell lilo to boot from hda, you will get setup
where
lilo
I'm just wondering: today is 6'th of november and normal people who isn't
a mandrake member must wait to download a new iso - why it takes so
long ?
Could anybody share your iso in a public ftp !!
--
Linux user: #333581
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote:
I'm just wondering: today is 6'th of november and normal people who
isn't a mandrake member must wait to download a new iso - why it
takes so long ?
Could anybody share your iso in a public ftp !!
Pawel, if you have been reading
Anne Wilson wrote:
On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote:
I'm just wondering: today is 6'th of november and normal people who
isn't a mandrake member must wait to download a new iso - why it
takes so long ?
Could anybody share your iso in a public ftp !!
Pawel, if you
Pawel Nozderko wrote:
I'm just wondering: today is 6'th of november and normal people who isn't
a mandrake member must wait to download a new iso - why it takes so
long ?
Could anybody share your iso in a public ftp !!
Do a google search for 9.2 iso's...
Thats how I found it..
I found
On Thursday 06 Nov 2003 9:20 am, Anarky wrote:
Anne Wilson wrote:
On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote:
Pawel, if you have been reading anywhere about Mandrake 9.2 you
will know of the problems that have been found with LG drives.
The ISOs will be made public as soon as
the
planet covered.
Mark
- Original Message -
From: Franki [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, November 06, 2003 2:06 AM
Subject: Re: [newbie] Mandrake 9.2 ISO
Pawel Nozderko wrote:
I'm just wondering: today is 6'th of november and normal people who
isn't
a mandrake
: Re: [newbie] Mandrake 9.2 ISO
Has anyone has any trouble installing via an ftp mirror? Aside from the
need for a broadband connection, is there anything one should worry about?
I've done that with Suse in the past, and it is through their list that I
have found numerous mandrake FTP mirrors
On Thursday 06 Nov 2003 10:35 am, Anne Wilson wrote:
On Thursday 06 Nov 2003 9:20 am, Anarky wrote:
Anne Wilson wrote:
On Thursday 06 Nov 2003 8:39 am, Pawel Nozderko wrote:
you
will know of the problems that have been found with LG drives.
any idea of a rough ETA for that?
Para: [EMAIL PROTECTED]
Assunto: Re: [newbie] Mandrake 9.2 ISO
Has anyone has any trouble installing via an ftp mirror? Aside from the
need for a broadband connection, is there anything one should worry about?
I've done that with Suse in the past, and it is through their list that I
have found
Do you know if the ISOs have the updates included or are they the same
as the bittorent ones with the LG drive patch?
Joeb
No,
Looking at the kernel version I have installed, it doesn't have the LG
fix kernel..
The fixed kernel is in the updates directory on the same site though..
I
I have mandrake 9.2 installed and was disappointed
to see my Radeon 9200 not natively supported. despite that facti
would like to get X up and running with the Radeon drivers from ATI's
site. I am not a mdk veteran and despite having a basic knowledge of linux
i am by no means totally
Hi Guys,
Am part of a V.large distrubuted university network which gives me 10Mps
download speeds (yeah!) but no control over network settings... I want
to do a fresh install of Mnadrake 9.2 off the uk mirror ftp server.
Therefore last night I got the network boot floppy image, created a boot
On Tuesday 21 Oct 2003 11:03 am, h w blackwell wrote:
Hi Guys,
Am part of a V.large distrubuted university network which gives me 10Mps
download speeds (yeah!) but no control over network settings... I want
to do a fresh install of Mnadrake 9.2 off the uk mirror ftp server.
Therefore last
Can anyone tell me what
Clic-PH1-9.0-snap_dec2002.iso is.
I found it at the download site
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On 10 Sep 2003 09:05:33 -0700
Aron Smith [EMAIL PROTECTED] wrote:
Can anyone tell me what
Clic-PH1-9.0-snap_dec2002.iso is.
I found it at the download site
its for Clustering BeoWulf clusters. if you want a copy I have the 2
cd set for it... b/f downloaded it by accident assuming it
On Thu, 2003-09-11 at 02:05, Aron Smith wrote:
Can anyone tell me what
Clic-PH1-9.0-snap_dec2002.iso is.
I found it at the download site
Yes.
stephen kuhn - owner
==
illawarra computer services
a kuhn media australia company
http://kma.0catch.com
would somebody please point me to some website or something
explaingin me how the Mandrake versions go and how to get the latest
version. Now I'm starting downloading 9.2 rc1 .. but what does that
mean? I know there is beta 1 2 .. which I know what it means .. but
what does rc1 mean? is
Dennis Myers wrote:
On Sunday 03 August 2003 10:04 am, ed tharp wrote:
On Sun, 2003-08-03 at 11:15, John Richard Smith wrote:
===
Mandrake 9.2 Beta 1 Released.
Mandrake Linux 9.2 Beta 1 has arrived to offer you the opportunity of
On Sunday 03 August 2003 04:04 pm, John Richard Smith wrote:
Dennis Myers wrote:
On Sunday 03 August 2003 10:04 am, ed tharp wrote:
On Sun, 2003-08-03 at 11:15, John Richard Smith wrote:
===
Mandrake 9.2 Beta 1 Released.
Mandrake
On Sunday 03 August 2003 08:15 am, John Richard Smith wrote:
===
Mandrake 9.2 Beta 1 Released.
Mandrake Linux 9.2 Beta 1 has arrived to offer you the opportunity of
summertime bug squashing. Join forces with the Mandrake Development
===
Mandrake 9.2 Beta 1 Released.
Mandrake Linux 9.2 Beta 1 has arrived to offer you the opportunity of summertime bug
squashing. Join forces with the Mandrake Development team by installing the Beta then
submitting bug reports.
On Sun, 2003-08-03 at 11:15, John Richard Smith wrote:
===
Mandrake 9.2 Beta 1 Released.
Mandrake Linux 9.2 Beta 1 has arrived to offer you the opportunity of summertime bug
squashing. Join forces with the Mandrake Development team
1 - 100 of 103 matches
Mail list logo
