HI,
I added some responses starts with below.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@cn.ibm.com
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wa
Yes, I agree with you, the xCAT-server/share/xcat/postscripts is no longer
used, the postscripts are now shipped with RPM xCAT instead of xCAT-server.
I searched the xCAT-server.spec and did not see anything about
share/xcat/postscripts and the rpm -qf /install/postscripts does how RPM
xCAT owns th
HI,
The command name is "makeconservercf", not "mkconservercf". I searched the
xCAT documentation wiki and updated all the references for "mkconservercf"
to "makeconservercf". Thanks for pointing out this problem .
-
Li,Guan
Luis
On Sun, Jul 24, 2011 at 7:14 PM, Guang Cheng Li
wrote:
HI,
The command name is "makeconservercf", not "mkconservercf". I searched
the xCAT documentation wiki and updated all the references for "
mkconservercf" to "m
HI,
The SLES 11 SP1 SDK support was added not too long ago, the latest xCAT
2.6.8 should work. A new autoyast template
file /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl is shipped,
use this template will enable the SDK repository, then you can add any SDK
packages to the pkglist file.
HI,
Yes, xCAT supports the kdump for stateless nodes. See
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_pLinux_Clusters#Setup_Kdump_Service_over_Ethernet.2FHFI_on_diskless_Linux_.28for_xCAT_2.6_and_higher.29
for more details.
Thanks,
--
HI Eric,
xCAT development team discussed this today, we agree that this is a code
problem, we are working on the fix. For now, you can workaround the problem
by specifying the username and password for the HMCs.
Thanks,
-
Li
HI,
The RHEL 6.1 has been in xCAT support list for a while, so either 2.6.9 or
2.6.10 should be fine.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@cn.ibm.com
Address: Building 28,
HI,
The XML/Simple.pm is installed by RPM perl-XML-Simple-2.18-1.noarch.rpm,
which is shipped with xcat dep tar ball, did you use yum/zypper to install
the xcat? The perl-XML-Simple should have been installed by yum/zypper,
because it is required by xCAT.
Thanks,
-
HI Arif,
Thanks for your patch, I opened a xCAT bug to track this issue, to make
sure it will not be forgotten.
https://sourceforge.net/tracker/?func=detail&aid=3463757&group_id=208749&atid=1006945
I understand the code is to add the long hostname into the knownhosts file,
I need to have some qui
HI,
The Linux/AIX mixed configuration should work with xCAT but not formally
supported, someone in the team has verified this configuration and
documented the steps at
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Linux/AIX_mixed_cluster_configuration
and
https://sourceforge.net/app
HI,
You can run "yum grouplist" on your managemet node to list all the package
groups, then you can use @group_name in kickstart file to specify the
package groups to be installed, or simply run "yum groupinstall group_name"
to install the packages on the up and running nodes.
Thanks,
--
HI,
I am not aware of any kind of external power management device support with
xCAT. If you do not have too many machines, like more than 1,000, and your
machines will not be frequently re-provisioned, manually powering on these
machines to start the provisioning process might be easier than setu
HI,
Yes, the Nagios monitoring supported was added in xCAT 2.7, you will have
to update to xCAT 2.7 to leverage the xCAT Nagios monitoring capability.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
ckey for ruxi003 from 192.168.121.16 port 44687 ssh2
> debug1: audit event euid 0 user ruxi003 event 6 (SSH_failpubkey)
> debug1: Return Val-1 for auditproc:0
> debug3: mm_answer_keyallowed: key 200901e8 is not allowed
> debug1: Failed to collect Cookie from Keystore
>
> any ideas?
/Client.pm line 159.
--
Mit freundlichen Grüßen / Best Regards
Matthias Merk
Guang Cheng Li schrieb am 29.03.2012 10:38:24:
> Von: Guang Cheng Li
> An: xCAT Users Mailing list
> Kopie: xCAT Users Mailing list
> Datum: 29.03.2012 10:40
> Betreff: Re: [xcat-user] xcat linux
HI,
For the "extraneous "set +x" in initrd-stateless", I do not see this
problem in my environment, could you please post the screen snapshot of
this problem?
For the "lsvpd: command not found" and "/opt/xcat/xcatinfo: No such file or
directory", which are not functionality problem, and have been
HI Vallard,
Just be curious, could you let me know the documentation and binary
location for the xCAT iOS client? I would like to have a try. thanks.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
E
The autoyast template
file /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl is the
tested version that integrates the SDK image, you can use this template
file or refer to this template file.
Thanks,
-
Li,Guang Cheng
HI,
For the NORESOLUTION, it may indicate that there are hostname resolution
problems in the cluster, could the MN resolve the hostname of itself?
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email
HI,
Thanks for figuring out the problem and the fix, I opened xCAT bug
https://sourceforge.net/tracker/?func=detail&aid=3524563&group_id=208749&atid=1006945
to track this, we will try to recreate this problem in our env and work on
the fix, and integrate the fix into xCAT code stream.
Thanks,
--
h original
template /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl without
any modification. But it is still not working.
How we must provide the sdk. Maybe my copycds was wrong.
Thanks in advance
André
From: Guang Cheng Li [mailto:ligua...@cn.ibm.com]
Sent: Freitag, 27. April 2012 03:05
To:
. And some packages from the sdk too. But after first reboot I get the
message " The package resolver run failed. Please check your software
section in the autoyast profile". But I didn’t change anything at the
software section in the autoyast file.
Regards,
André
From: Guang Cheng Li [mailto
HI,
I am not sure if I understand the problem, are you trying to modify the
dhcpd.conf to redirect the dhcp log info to some files other
than /var/log/messages? After the xCAT makedhcp -n command is run, you can
modify the dhcpd.conf file to add the log-facility commands, and then
restart dhcpd, t
HI,
Yes, you can simply run "genimage centos6.2img -i eth0" to generate the
image, the img files have already been extracted to correct directory.
Several problems caused the error:
1. There is a code problem with imgcapture -o , I opened bug
https://sourceforge.net/tracker/?func=detail&aid=352
HI,
The error indicates the files images/pxeboot/vmlinuz,
images/pxeboot/initrd.img and images/pxeboot/initrd.img could not be found
in directory /install/rhels6.2/x86_64/, you could check if the copycds has
successfully copies the os packages to /install/rhels6.2/x86_64?
Thanks,
---
be the reason. i'll try re-downloading the iso and running the
copycds command again, but i don't have much hope for that.
any other ideas?
thanks.
damir
On Mon, Jun 4, 2012 at 9:34 PM, Guang Cheng Li wrote:
HI,
The error indicates the files images/pxeboot/vmlinuz,
imag
HI,
We made some changes recently(2.7?) to use the os shipped tftp server
instead of the xCAT one. For configuring the os shipped tftp server,
AAsn.pm intentionally configured disabled=yes into /etc/xinetd.d/tftp, and
start tftp directly by calling "/usr/sbin/in.tftpd $v4only -v -l
-s /tftpboot -m
HI,
xCAT development and testing team have always been using the xCAT
pre-shipped RHEL kickstart templates under /opt/xcat/share/xcat/install/rh
without any problem, you may want to use the xCAT pre-shipped kickstart
template also, if you do not have specific requirements with the
installation.
T
HI,
The nfs caching is built-in feature with nfs, it means that nfs client will
not write the info back to the nfs server immediately, it will cache for a
while before writing the data back to nfs server, I do not know for sure on
how to tuning the nfs cache, but with the default settings on AIX,
HI,
This should be a xCAT bug, I opened xCAT bug
https://sourceforge.net/tracker/?func=detail&aid=3541948&group_id=208749&atid=1006945
to address this problem. In the meanwhile, you can manually modify the
subroutine generic_post in /opt/xcat/share/xcat/netboot//genimage
to change the mount optio
HI,
The doc
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_Port_Usage
lists more ports that will be used by xCAT.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@cn.
HI,
A lot of reasons might cause postscripts could not be run successfully,
like the compute node can not resolve the hostname of the management node.
Try the following debug procedure:
1. Anything in /tmp/wget.log? is the node trying to get the postscripts
from the correct server?
2. /var/log/x
heer
sa_zah...@hotmail.com
> Date: Wed, 25 Jul 2012 14:26:34 +1200
> From: francois.bis...@canterbury.ac.nz
> To: xcat-user@lists.sourceforge.net
> Subject: Re: [xcat-user] postscript not run after install?
>
> On Wed, 25 Jul 2012 10:16:40 Guang Cheng Li wrote:
> > HI,
> &
pts directory and
> subdirectories are world readable. This can cause a failure that will
> show up in the wget.log that Guang Cheng Li asked for below.
> Thanks!
>
Ok I will give you a bit of what you want. Like I said
"updatenode -P"
runs the postscripts normally so thses f
Does /xcatpost/mypostscript and /xcatpost/mypostscript.post look correct?
like this:
[root@kvm1 xcatpost]# cat /xcatpost/mypostscript
# subroutine used to run postscripts
run_ps () {
logdir="/var/log/xcat"
mkdir -p $logdir
logfile="/var/log/xcat/xcat.log"
if [ -f $1 ]; then
echo "`date` Ru
ct Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xCAT Users Mailing list
Date: 2012-08-01 08:04
Subject:Re: [xcat-user] postscript not run after install?
On Tue, 31 Jul 2012 15:54:26 Guang Cheng Li wrote:
> Does /xcatpost/mypostscript
M China System Technology Laboratory
Email: ligua...@cn.ibm.com
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wang West Road, Haidian District Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xCAT Users Mailing list
Date:
I am trying to setup a xCAT cluster in which both the xCAT MN and CNs are
vmware esxi virtual machines on the same physical machine, the virtual
machines were created manually through the vmware vsphere client, when I
defined the virtual machine as xCAT CN, the definition looks like:
[root@rhmn ~
HI,
Several comments:
1. -w is used to specify the selection string to filter nodes, in your
case, the -w is not right. You should use this:
chdef -m -t node -o p7n14-c postbootscripts=
2. otherpkgs is in the xcat default postbootscripts, you can not remove the
otherpkgs through chdef , yo
The networks.domain is not honored by makedhcp for now, the makedhcp uses
the site.domain for the DHCP option "domain-name" for all the networks.
xCAT currently does not support multiple domains, we do have a xCAT
wishlist item to support multiple domains.
The networks.ddnsdomain is used for ddns
//ad.doubleclick.net/clk;258768047;13503038;j?
http://info.appdynamics.com/FreeJavaPerformanceDownload.html
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
[attachment "
If we simply put the updated kernel RPM into the os packages directory, I
do not think it will work. The os repo information needs to be updated too,
updating the os repo info is not so easy, we have ever tried to put some
updated RPMs into the os repo, but the os installation will not recognize
th
2 10:10 PM, Guang Cheng Li wrote:
If we simply put the updated kernel RPM into the os packages
directory, I do not think it will work. The os repo information needs
to be updated too, updating the os repo info is not so easy, we have
ever tried to put some updated RPMs into t
HI,
When you said "get rcons working from servicenodes", do you mean run the
"rcons" command on the service nodes? It is not recommended to run xCAT
commands directly on service nodes. If you set up the conserver and
servicenode attribute correctly, when you run makeconsercf, it will
generate cons
st Regards
Matthias Merk
Guang Cheng Li schrieb am 09.11.2012 03:10:48:
> Von: Guang Cheng Li
> An: xCAT Users Mailing list ,
> Datum: 09.11.2012 03:12
> Betreff: Re: [xcat-user] allow rcons from servicenode
>
> HI,
>
> When you said "get rcons working from servic
gards
Matthias Merk
Guang Cheng Li schrieb am 15.11.2012 04:58:10:
> Von: Guang Cheng Li
> An: xCAT Users Mailing list ,
> Datum: 15.11.2012 04:59
> Betreff: Re: [xcat-user] allow rcons from servicenode
>
> HI,
>
> It is not recommended to run xcat command directly on ser
rated.
/opt/freeware/sbin/conserver wasn't running. how is it started
automatically under AIX?
thanks
best regards
Matthais
Von:Guang Cheng Li
An: xCAT Users Mailing list ,
Datum: 19.11.2012 03:36
Betreff:Re: [xcat-user] allow rcons from servicenode
Have you set the &q
I guess the problem is that the packages perl-Socket6 and
perl-IO-Socket-INET6 are installed on the MN however the IPv6 is disabled
on the MN. Could you try to remove the packages perl-Socket6 and
perl-IO-Socket-INET6 from MN and then restart xcatd to see if helps.
The patch you attached does seem
Pokorra
To:
Date: 2012-12-03 16:25
Subject:Re: [xcat-user] Patch for xcatd to support better SLES
Am Montag, den 03.12.2012, 10:14 +0800 schrieb Guang Cheng Li:
> I guess the problem is that the packages perl-Socket6 and
> perl-IO-Socket-INET6 are installed on the MN howev
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Granting_Users_xCAT_privileges
should be the doc that could help you out.
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@c
--
Daniel M. Weeks
Systems Administrator
Computational Center for Nanotechnology Innovations
Rensselaer Polytechnic Institute
Troy, NY 12180
518-276-4458
[attachment "remote-network-fix.patch" deleted by Guang Cheng Li/China/IBM]
-
HI,
The syslog on all the compute nodes is configured by xCAT to be redirected
to management node, if you would like to stop the syslog redirection, you
could login the compute node, remove the line "*.* @" from the
syslog configuration file, /etc/rsyslog.conf for RHEL 6.x and
/etc/syslog-ng/syslo
HI,
I could run genimage on CentOS 6.3 and diskless boot CentOS 6.3 compute
nodes without any problem, the error below might be related to the package
list file you are using, the error "W: Dracut module "" cannot be
found." is caused by the missing dracut-network package in the pkglist.
Here
AM, Guang Cheng Li wrote:
> HI,
>
> I could run genimage on CentOS 6.3 and diskless boot CentOS 6.3
> compute nodes without any problem, the error below might be related
> to the package list file you are using, the error "W: Dracut module
> "" cannot be foun
HI Gilad,
The otherpkgs or ospkg should work:
Otherpkg:
#On MN, You need to:
#1. put rpms under /install/post/otherpkgs/os/arch directory where
'os' and 'arch'
# can be found in the nodetype table.
#2. put the name of the packages to /opt/xcat/share/xcat/netboot
HI,
This is not a formal announcement, but it will happen very soon, the
nodeset options "install", "netboot" and "statelite" will be deprecated in
xCAT 2.8, the os provisioning for RHEL, Fedora, CentOS and other RH family
os distros, SLES/SuSE, Debian/Ubuntu nodes should be switched to use
osima
HI Chris,
A nice catch, I wrote the code a while ago, maybe I got confused by the
return value of xCAT::Utils->isSELINUX() when I wrote the code, the
xCAT::Utils->isSELINUX() simply returns the return value from command
selinuxenabled, the selinuxenabled command return value 0 means SELinux is
ena
HI,
I was not seeing issue with conserver when I setup the HAMN with DRBD
+Pacemaker+Corosync, you mentioned conserver could not be started, if you
try to start it manually, does the command "service conserver start"
returns 0 or not? it is expected to return 0. And what is your Pacemaker
resource
all=21, rc=1, status=complete):
unknown error
I hope that makes sense
regards,
Arif
On 22/05/13 01:44, Guang Cheng Li wrote:
HI,
I was not seeing issue with conserver when I setup the HAMN with DRBD
+Pacemaker+Corosync, you mentioned conserver could not be started, if
it's own has no problems at all, and I do get
exit status to 0, this was the first thing I checked.
The error I think was on the following lines when I did "crm status"
Failed actions:
xCAT_conserver_stop_0 (node=mg01, call=21, rc=1, status=complete):
unk
HI,
What you will get if you run the following commands manually on the
scl-p05-mn?
cd /install/netboot/centos6/x86_64/scl-mgmt/rootimg
gzip -cd /tmp/xcat_imgcapture.30829 | cpio -idum
Several possible reasons I can think of:
gzip is not installed on scl-p05-mn, or the scl-p05-mn does not have
You are right, the "profile" attribute in the osimage table is not that
heavily being used, it could be used to generate some default paths if the
path was not set explicitly, can could also be used the "group" or
"categorize" the osimages.
Thanks,
-
HI Arif,
Thanks for the configuration listed below, I updated the xCAT doc
http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setup_HA_Mgmt_Node_With_DRBD_Pacemaker_Corosync
to reflect this. If you have any further updates with the configuration or
procedure, please let me know and I can
Hello Russell,
This problem has been fixed in 2.8.3. See
https://sourceforge.net/p/xcat/bugs/3748/ for more details. Not sure if you
could update to 2.8.3...
Thanks,
-
Li,Guang Cheng (李光成)
IBM China System Technology Labora
SIGNATURE-
Version: GnuPG v1.4.14 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iEYEARECAAYFAlLobjoACgkQO2KABBYQAh9zGgCcD4ecUU74/DArE5bNnu+TkGMJ
mekAnRApPmVKkM1f6LZFFyEDGvxgWU36
=LvrK
-END PGP SIGNATURE-
[附件 "confignics.patch" 被 Guang Ch
HI,
The Infiniband on Ubuntu is not supported by xCAT for now, the current plan
is to add the Infiniband support on Ubuntu in the 2H 2014. We welcome new
developers willing to contribute to the xCAT code to make it better. In
order to do that, you need to sign the xCAT Contributor or Maintainer
ag
HI Arif,
Thanks for contributing the idea and code. xCAT development team reviewed
the code and agreed that this is nice feature for xCAT 2.9. So could you
please go ahead and checkin the code to xCAT 2.9?
Several other things need to consider:
1. Do we want to make the consoleondemand be a node
I figured it out. There is a problem in the code /bin/doxcat that tries to
run ntpq command with flag "rv 0 state", however, the "rv 0 state" was
removed in the new ntp version. I fixed the problem in code, made a new
xCAT-gensis-base based on CentOS 6.5 and uploaded it to sourceforge, if you
get t
HI Markus,
Did you update from some xCAT 2.8.4 pre-GA snapshot build to this GA
version(20140512 build)? The development team modified the code logic of
creating xcat.conf twice during the development cycle, I guess the later
change did not cover the situation in which the user already installed s
HI,
The doc
http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Highly_Available_Management_Node
describes the different HA MN options for xCAT, you could take a look and
if you have further question, please let me know.
---
HI,
Could you please check the version of xCAT-genesis-scripts and
xCAT-genesis-base? the build date of these packages should be later than
20140426.
[root@ls21n01 ~]# rpm -qa | grep -i xCAT-genesis
xCAT-genesis-scripts-x86_64-2.9-snap201406021344.noarch
xCAT-genesis-base-x86_64-2.8-snap201404
We updated the link to https://sourceforge.net/p/xcat/wiki/, and the
http://xcat.sf.net will be redirected to the wiki automatically.
We still have a lot of work to do, the biggest thing is to update the
"transcludes/includes" in all the documentation pages. When you are
reading the documentati
Hello xCAT Users,
As you may know that we migrated the xCAT wiki from sourceforge Mediawiki
to the new sourceforge Allura wiki, because sourceforge retried the
Mediawiki in June 2014. The new xCAT wiki is
https://sourceforge.net/p/xcat/wiki/Main_Page/, we are still doing some
clean up work on
HI Christian,
Sorry for the late response, I changed the code to add the qlcnic kernel
module into the default genesis-base modules, you will be able to get the
qlcnic in the default xcat-genesis-base in the next version of
xcat-genesis-base. BTW, we are making some significant changes with the
HI xCAT users,
In year 2014, we have been experiencing the network access problems to
sourceforge quite a bit, even when there is no network access problems, the
network speed is also very slow, it dramatically slows down our development
and testing progress, and also make us wondering about the
S35 2PG.
This message is private and confidential. If you have received this message
in error, please notify us and remove it from your system.
On 07/01/15 09:57, Guang Cheng Li wrote:
HI xCAT users,
In year 2014, we have been experiencing the network access problems
to sourcefo
Park, Chapeltown, Sheffield, S35 2PG.
This message is private and confidential. If you have received this message
in error, please notify us and remove it from your system.
On 07/01/15 09:57, Guang Cheng Li wrote:
HI xCAT users,
In year 2014, we have been experiencing the network access prob
, Dong Bei Wang West Road, Haidian District Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: Guang Cheng Li/China/IBM
To: xcat-user@lists.sourceforge.net
Date: 2015/01/07 17:57
Subject:Moving xCAT from sourceforge to github?
HI xCAT users,
In year 2014, we have been
京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: Guang Cheng Li/China/IBM
To: xcat-user@lists.sourceforge.net
Date: 2015/02/11 16:13
Subject:Re: Moving xCAT from sourceforge to github?
As a follow up of the discussion for Moving xCAT from sourceforge to
github, after discussed with
HI,
The xcat-dep online repo was having some problem, and the development team
has fixed the problem earlier today, could you retry?
-
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@cn.ibm.com
Douglas,
Have you tried to setup the networks.gateway to be the keyword
""?
[root@c910f02c01p02 ~]# tabdump -d networks | grep gateway
gateway:The network gateway. It can be set to an ip address or the
keyword , the keyword indicates the cluster-facing
ip address configured on this mana
HI,
The latest xCAT-genesis-base-x86_64 was generated on CentOS 6.6, we may
regenerate it on CentOS 6.7 when CentOS 6.7 is released later this year. If
the "modprobe" workaround is acceptable, let's leave
xCAT-genesis-base-x86_64 as it does today.
-
"It's not an opportunity if it doesn't scare you a little bit"
Inactive hide details for Guang Cheng Li ---05/19/2015 08
paste that rnetboot does, things work fine...
Any way to disable the gateway being added to OF command?
_
Douglas Myers,
IBM Special Events - Smart Cloud BMS Lead
_
"It's not an opportunity if it doesn't scare you a littl
this
will get us by...
_
Douglas Myers,
IBM Special Events - Smart Cloud BMS Lead
_
"It's not an opportunity if it doesn't scare you a little bit"
Inactive hide details for Guang Cheng Li ---05/21/2015 06:28:37 PM---HI,
Guang
The xCAT development team has made some changes with the xCAT build process
in the xCAT master branch(2.10) to allow the users to build xcat-core
tarball on their machines locally, here is the procedure,
https://sourceforge.net/p/xcat/wiki/XCAT_Developer_Guide/#building-xcat-core-from-xcat-core-gi
The OpenSUSE build service seems to support most of the main stream Linux
distributions: CentOS, Debian/Ubuntu, Fedora, RHEL, SLES; I did some quick
investigation, the ppc64/ppc64le support of these build services might be a
problem. We need more investigation before we could decide.
-
We discussed this topic in the xCAT development team meeting today, here
are the consensus from the team, if you have any further comments, please
let us know.
1. Code repository: We will migrate the xCAT code repository from
sourceforge to github after xCAT 2.10 release, which is planned for July
HI,
Since we are migrating the xCAT source code repositories from sourceforge
to github, the xCAT code repositories on sourceforge are now locked to make
sure the migration will be smooth, I will post another message to the
mailing list when the source code repositories are ready on github. If yo
BM China System Technology Laboratory
Tel: 86-10-82453499
Tie-Line: 9053499
Email: ligua...@cn.ibm.com
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wang West Road, Haidian District Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: Guang Cheng
HI,
As part of the xCAT migration from sourceforge to github, we will migrate
the xCAT bug(https://sourceforge.net/p/xcat/bugs/) and feature-request(
https://sourceforge.net/p/xcat/feature-requests) system to github issue
system(https://github.com/xcat2/xcat-core/issues), as of today, the xCAT
bu
HI,
I can think of two options:
1. Use psh "echo \n | sudo -S " to automate
the password input for sudo, this is not a secure option because you need
to echo your password on the screen.
2. If your security policy allows, configure the sudo to allow
password-less commands execution.
93 matches
Mail list logo