CTRL-SHIFT-6
Rodgers Moore
SamN wrote in message
news:[EMAIL PROTECTED]
From a router, I tried telnetting to another router but entered the wrong
ip
address so it got stuck at:
Trying 192.168.5.55 ...
How do i break out without waiting for those 15-20 seconds it keeps
trying?
thank you
interfaces.
interface ethernet0
no ip address
bridge-group 1
interface ethernet1
no ip address
bridge-group 1
interface BVI 1
ip address 192.168.1.1 255.255.255.0
bridge irb
bridge 1 protocol ieee
no bridge 1 bridge ip
bridge 1 route ip
Rodgers Moore
"Rick" [EMAIL PROTECTED] wrote
out of
phase, anyway they work rather well.
Rodgers Moore
[EMAIL PROTECTED] wrote in message
52D26B7F4FB6D411A34800E018025FA303758D@MAIL-SK1">news:52D26B7F4FB6D411A34800E018025FA303758D@MAIL-SK1...
Dennis,
I've worked with the Aironet 340 wireless bridge, and my experience hasn't
been
Show flash shows one or two partitions? You may need to issue the partition
command in config mode to make the router see the flash as one 8 Mb
partition. You'll only be able to reload the IOS from rommon the first
time.
Rodgers Moore
"John Chang" [EMAIL PROTECTED] wrote in mess
r to an NT based
RADIUS or TACACS server that supports NT domain authentication. The domain
name will be case sensitive, so make sure it's all upper case, everywhere.
Rodgers Moore
"Piatnitchi Cristian" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECT
Yes, search for "mode ccs" on CCO. I've done this with PRI's (T1) between
two Nortel PBX's over a frame relay WAN using 3810-V3's. It's the same for
your senario. Oh, I used VOFR because of its lower overhead.
If you can't find an example, let me know and I'll find one up for you
.
I say "D" is the most likely suspect, although I would change BGP to EBGP.
Rodgers Moore
""Howard C. Berkowitz"" [EMAIL PROTECTED] wrote in message
news:p05001900b6aff192dfe7@[63.216.127.98]...
I would choose D , correct me if I am wrong
--- David Tran [EMA
Hi all,
I have a March 18th lab date in San Jose and I'd like to swap for a San Jose
date in April or May.
email me directly if you're interested.
Rodgers Moore
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Am I the only one who finds this funny? I mean, isn't John Chambers
Cisco's CEO?
Sorry for the OTM,
Rodgers Moore
"John Chambers" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Anyone who have experience with Juniper routers would like
I have a tidbit to add.
Multicast is not supported on secondary networks. So you can't support
protocols that use multicast on the secondary network such as WCCP or H323.
Or at least you'll have to configure unicast connectivity for things like
OSPF or EIGRP.
Rodgers Moore
""N
Remember that just because the route floats doesn't mean it's made of wood.
If it weighs the same as a goose, then it's made of wood and of course, then
it is a witch.
Rodgers Moore
"Danial wood" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED].
are the other options
router (config)# int e0-- select the
interface
router (if-config)# bridge-group 1 -- turns on bridging.
do this on every interface you want to bridge in/out
Rodgers Moore
"Fomes Iain" [EMAIL PROTECTED] wrote in mess
e the prompt to return quickly. When domain lookup is ON,
I've seen it take up to two minutes before the prompt comes back. So just
be patient.
Rodgers Moore
""Ash Aslam"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi there,
I hav
this but, is there a way to make a static
ARP entry?
Rodgers Moore
"James Wilson" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I hope someone can shed some light on the problem I have come across in
the
following scenario :
Three routers, R1,R2 and R3
The protocol down on the 1005 is because of the no keepalive on the 2501.
Rodgers Moore
"Minh Vu" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate
56k
link acros
Hi guys, (and gals, oh! and Chuck)
I don't know why, but I thought I'd share how I remember [E]IGRP metrics.
[E]IGRP metrics cause nightmares. So all you get from them is a "BaD Load
of ReM".
Have a happy Thanksgiving!
Rodgers Moore
""Chuck Larrieu"" [EMA
then runs at the new speed set in the config file.
Rodgers Moore
""Austin"" [EMAIL PROTECTED] wrote in message
8vb8tg$mnt$[EMAIL PROTECTED]">news:8vb8tg$mnt$[EMAIL PROTECTED]...
I have a Cisco 2511 and the console has locked all of a sudden.
I get output from the boot seq
-atm
atm pvc 10 20 100 aal5snap
map-list my-atm
ip 192.168.0.2 atm-vc 1 broadcast
Rodgers Moore
""RANMA"" [EMAIL PROTECTED] wrote in message
8vaauv$mas$[EMAIL PROTECTED]">news:8vaauv$mas$[EMAIL PROTECTED]...
Hello
I am now configing a ATM circuit ...but faac
I think that the most telling statement you've made is that Cisco knows
about the book, and hence the lab proctors do too. So logically, this book
alone will not be enough to pass the lab.
Rodgers Moore
"Chuck Church" [EMAIL PROTECTED] wrote in message
149867F27C65D411977900508B
Reply in-line.
""Peter Van Oene"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Couple comments/questions inserted
*** REPLY SEPARATOR ***
On 11/15/2000 at 2:14 AM Rodgers Moore wrote:
ebgp multihop has nothi
be
persuaded to share it too. ;)
Rodgers Moore
""pinoal"" [EMAIL PROTECTED] wrote in message
8unip9$j3t$[EMAIL PROTECTED]">news:8unip9$j3t$[EMAIL PROTECTED]...
Rodgers ,
Do you have the wiring diagrams for EM 4 wire. I have done a few
installations and got the
wir
Since I'm not sure if this is a NAT/PAT question
Add the "secondary" keyword to the second IP ADDRESS statement.
For Example:
interface ethernet 0
ip address 192.168.1.1 255.255.255.0
ip address 192.168.1.2 255.255.255.0 secondary
ip address 10.2.2.1 255.255.0.0 secondary
Rod
to
protect not only yourself but also the person who helps you?
That should just about cover it,
thanks.
Rodgers Moore
""Alex Madjeski"" [EMAIL PROTECTED] wrote in message
002301c04c37$648f5080$[EMAIL PROTECTED]">news:002301c04c37$648f5080$[EMAIL PROTECTED]...
At least it didn't say AFLAC.
"Jim Dixon" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Please follow the below instructions EXACTLY
I have discovered a new application for voice menuing systems.
ENJOY! and remember..INSTALL THAT OPTION 7 on every system you
Reply in-line.
Rodgers Moore
"Amit Gupta" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
Need some help in configuring VoIP
I am testing the loopback connectivity between my
router and EPABX by dialing a local extension number.
g, somehow it keeps saying 1 + 1 = 2. That can't be right? can
it?
Rodgers Moore
Sorry, I couldn't help myself
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]..
.
Can't we just use the cut-through method instead of this tedious store and
forward method
So it would safe to say that some of the CCO info is out dated. I ran into
this issue a few of weeks ago when a Cisco SE didn't like a design I did.
Rodgers Moore
""Gabriel McCall"" [EMAIL PROTECTED] wrote in message
8uhq2i$2pj$[EMAIL PROTECTED]">news:8uhq2i$2pj$[EMAIL
considered putting
voice cards in the 7206's and going VOFR?
Rodgers Moore
""Chris Boyd"" [EMAIL PROTECTED] wrote in message 001d01c04b5a$6df29c50$[EMAIL PROTECTED]">news:001d01c04b5a$6df29c50$[EMAIL PROTECTED]...
All right guys I need some help
I
I'm no guru, but that's what I've seen when the LEC didn't or couldn't talk
to the LECS. Usually, a config error, like a fat-fingered ATM address or
missing command on the LEC.
Rodgers Moore
""TheFish"" [EMAIL PROTECTED] wrote in message
8udadn$j2a$[EMAIL PROTECTED]&quo
or a four wire version? If it's a four wire, then it may be
possible. You can always try it. If it doesn't work, then do something
else.
Rodgers Moore
"Frank Kim" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi folks,
I have a Pairgain T1 campus
for NT, it comes on the Option Pack 4 CD and is
free. It won't work without the radius/IIS service pack 6 and some other
upgrade (I forget the name). Just be forwarned, with this software you get
"exactly" what you pay for.
Rodgers Moore
""Parris, Brian"" [EMA
sleep on it, but you've got the idea. Someone should
try it out. I would, but I don't have a MAU handy.
Rodgers Moore
""Frank Wells"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Try it.
From: Brian [EMAIL PROTECTED]
Repl
of the
cable you already have.
Rodgers Moore
""Neil Desai"" [EMAIL PROTECTED] wrote in message
8ubmb4$7a9$[EMAIL PROTECTED]">news:8ubmb4$7a9$[EMAIL PROTECTED]...
I am currently making a lab with a 2511 as my terminal server. I am
plugging
the octal cables into
eft", knows how to reach all of the
"classful" networks. Left sent its update first, so, Right just sends null
updates.
Rodgers Moore
"Phil Barker" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
Hi Gang,
Three Routers in a triangle. Labelled Top, Lef
that you
can trunk out a port by sub-interfacing and setting the encaps to ISL. (just
like a router) You setup a VLAN with IRB and a BVI interface.
I may be mistaken, I've only put a few hours in on the box.
Rodgers Moore
""Kevin Wigle"" [EMAIL PROTECTED] wrote in message
0
No VOIP on his lab? It didn't come out until 12.0
Rodgers Moore
""Circusnuts"" [EMAIL PROTECTED] wrote in message
015701c04659$ff0ab7a0$[EMAIL PROTECTED]">news:015701c04659$ff0ab7a0$[EMAIL PROTECTED]...
My boss came back from his First run @ the CCIE lab was
ation just like you describe.
I pray it goes smoothly.
Rodgers Moore
""Rossetti, Stan"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Could someone tell me if they have seen this problem before or have any
suggestions.
Scenario:
W
Sure you can. Here's a snippet of ATM config from a 3640. This is more
complex than a normal config as there are 4 elans and 3 different LECS.
I hope it helps,
Rodgers Moore
hostname 3640a
!
ip subnet-zero
ip host-routing
no ip domain-lookup
!
lane database cisco
name test server-atm
associated with the 1 PVC and ALL of them are locally significant, otherwise
we'd run out of DLCI's really quick.
Another small fact is that LMI does not have to match end to end. It's
locally significant too.
Rodgers Moore :)))
""Chuck Larrieu"" [EMAIL PROTECTED] wrote in
Are you using IRB? and did you remove port 48
frombridge group 2?
Rodgers Moore
"Manoj Ghorpade" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...Hi Group, I have a Cisco 2948G-L3 switch and want to setup
the management on the switch.I tried doing things the doc
from both DPS where I work and from Mastec,
both in Blue Ash. In Louisville, we can use the DPS facilities in
Middletown.
Thanks,
Rodgers Moore
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
answer
This is one of the few written tests that I think
hands-on helps alot more than studying books.
Before anyone asks: I'm not sure exactly how
I did, but I feel good enough to think I'll pass.
Rodgers Moore, CCDP, CCNP-Security
""Phil.Lerner"" [EMAIL PROTECTED]
title is Security Consultant, so I just took the test cold.
I work with Firewalls and VPN's all of the time, and not just Cisco. I did
have to guess on more questions than I would have liked. It was a good
diversion from working on the CCIE RS lab.
Rodgers Moore
"Anand Bhat" [EMAIL
s
thinking of trying to change the link type to non-broadcast, point-to-point,
etc. to see if this would be a better/easier setup. I'll let you know if I
dig up any more good info.
Rodgers Moore
""Louie Belt"" [EMAIL PROTECTED] wrote in message
000201c03e40$f4fbb6e0$[EMAIL
Title: FW: Alicia Silverstone teaches Cisco router configurations
Of course we do.
Rodgers Moore
"Pieter Jordaan" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Didn't Know movie stars had time for this stuff
:-0http://routergod.com
Brian,
You don't need a multi-port NT1. The wiring is a bus topology. The same
way you connect multiple phones at home, just four wires instead of two.
Rodgers Moore
"Brian" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone kn
Mark,
Maybe I'm missing something, I gather the gateway
and the PIX are not the same box. So you need a route in the gateway to
the PIX.
Rodgers Moore
""Mark Kinley"" [EMAIL PROTECTED] wrote in message
000a01c03a04$88c584a0$140210ac@mkinley">news:000a01c03a
An Adtran Atlas 550 is alot less expensive and you only loose the ability to
have DS-3 interfaces. But you'll still spend more than installing a couple
of BRI's for 6 months. I doubt you'll find any Atlases on the used market.
Rodgers Moore
""FRS"" [EMAIL PROTECTED] wrote i
I have a Jan 4, 2001 CCIE-RS Lab in San Jose. I's like to trade for a late
November or early December date.
email me,
Rodgers Moore
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Tim,
The last time I priced HPOV for Sun, it was about $5000. I am unaware of
any free or lesser cost options.
I too,would love to find a better option. Let me know if you find
anything.
Rodgers Moore
""Tim O'Brien"" [EMAIL PROTECTED] wrote in message
00b801c034
Paul,
If you haven't upgraded Hyperterm, then you should. Hyperterm straight off
the CD has a bug in it. I bet you can guess what that bug is
Rodgers Moore
"Paul Werner" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Robert McI
the misconfigured
repeater, or you have them reconfigure for 56K channels.
Let me know if I'm right and about that job. :))
Rodgers Moore, CCDP, CCNP-Security
""Fred Flinstone"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
ok here it g
.x.x.x for
the internet (the outside) and 192.168.x.x for your local LAN (the inside).
Check out the ALIAS command. It is for this exact purpose.
Rodgers Moore, CCDP, CCNP-Security
Design and Security Consultant
Data Processsing Sciences, Corp.
""oluwakemi ojo"" [EMAIL PROTECT
one, a deny route map would reverse the
expected result.
Rodgers Moore
""Hubert Pun"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi
what does the "access-list 100 permit ip host 0.0.0.0 host 0.0.0.0"
applied to an
something and when
it's optional.
my 1.532 cents worth
Rodgers Moore
""Chuck Larrieu"" [EMAIL PROTECTED] wrote in message
002801c026a3$bcf3e880$[EMAIL PROTECTED]">news:002801c026a3$bcf3e880$[EMAIL PROTECTED]...
A segmented area is of no concern so long as there is
code or you may need to add
the area code to the dial string.
Rodgers Moore, CCDP, CCNP-Security
""Kari Nurdin"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All, I need help,
I have a central site and a remote site in a ISDN
, but only if it is a subnet of
25 bits or more.
Rodgers Moore
""Steve Warner"" [EMAIL PROTECTED] wrote in message
008d01c023d9$cd8e3be0$[EMAIL PROTECTED]">news:008d01c023d9$cd8e3be0$[EMAIL PROTECTED]...
Hi,
Could someone explain what the right hand bit of the exte
Nope. Besides that would be contrary to good security policy.
Rodgers Moore
""Cthulu, CCIE Candidate"" [EMAIL PROTECTED] wrote in message
8qb0n2$cip$[EMAIL PROTECTED]">news:8qb0n2$cip$[EMAIL PROTECTED]...
Hi, all,
Sorry for the cutesy subject header. I just go
Kent,
Just an idea
What if you put in a static route to null with an administrative distance of
200? I'm assuming the route will be learned via IGP, so when the route goes
away via IGP, it's still there statically, so eBGP will continue to
advertise it.
Rodgers Moore
"Kent&qu
Hey what about CDP?
Rodgers Moore
""Kenneth Lorenzo"" [EMAIL PROTECTED] wrote in message
8qc570$s7p$[EMAIL PROTECTED]">news:8qc570$s7p$[EMAIL PROTECTED]...
#2: Could be any of these:
VTP
PVST
PVST+
ISL
CGMP
HSRP
""Atif Awan"" [EMAIL PR
of pornography, the VNP client would force everything
through the tunnel, where your Internet usage could be logged, monitored, or
proxied. Responces from the porno sites would have to travel back to the
PIX end then through the tunnel and couldn't come straight to you.
etc. etc. etc.
Rodgers Moore
Pure curiosity. Can you provide the source of
the ICMP redirect limitation? This is the first time I've ever heard this
and I need to follow up on it if it's true.
Rodgers Moore
""Rodney Jackson"" [EMAIL PROTECTED] wrote in message
002b01c02433$1c2c2100$[EM
it doesn't work after install, buggy as hell. The patches fix that
though.
I'll post a RADIUS HOW-TO and the patch files on my news server:
news.zapsys.net news group: zs.ojt.microsoft.HOW-TO
ttyl,
Rodgers Moore
""Stull, Cory"" [EMAIL PROTECT
A co-worker has seen this and it is a bug. He didn't remember the version
number(s) affected.
Rodgers Moore
""BE"" [EMAIL PROTECTED] wrote in message
8ptc7v$7a1$[EMAIL PROTECTED]">news:8ptc7v$7a1$[EMAIL PROTECTED]...
Rodgers,
Hi! Thanks for your response.
The
note: part of the loopback network)
line vty 5 29
rotary 1
password cisco
login
Enjoy, there's nothing like a little slight-of-hand....
Rodgers Moore, CCDP, CCNP-Security
Design and Security Consultant
Data Processing Sciences, Corp.
"jason yee" [EMAIL PROTECTED] wrote in message
[EMAIL PRO
for the one port/one router.
Rodgers Moore
""Palis Michael"" [EMAIL PROTECTED] wrote in
message 000a01c01ef1$a41eafc0$[EMAIL PROTECTED]">news:000a01c01ef1$a41eafc0$[EMAIL PROTECTED]...
Hello all.
We are using some AS5300 for our
access-networ
It sounds like they're both identical. That's good.
Do you have ALL the interfaces in an UP state? and each pair of interfaces
are on the same hub?
A down interface will be considered a failure
Both configs are identical? You power cycled both boxes at the same time?
Rodgers Moore
The PIX does it backwards to the rest of Cisco. In conduits, it's
destination, source not the other way around.
Rodgers Moore
""Kristopher B. Climie"" [EMAIL PROTECTED] wrote in message
8pl3cd$8cu$[EMAIL PROTECTED]">news:8pl3cd$8cu$[EMAIL PROTECTED]...
It looks to
the water
expands and can cause damage. Eventually, the ice will cut the fiber enough
to cause it to degrade or even fail. Optical Cable Corporation (OCC) might
be a place to ask if you need more specifics.
Rodgers Moore
"mike delp" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]&qu
e distance limitation is around 1500 ft.
Enjoy,
Rodgers Moore
""JCoyne"" [EMAIL PROTECTED] wrote in message
8pm569$4qc$[EMAIL PROTECTED]">news:8pm569$4qc$[EMAIL PROTECTED]...
How do i setup an adtran atlas 550 to simulate an ISDN switch??
The Adtran site tells
s my theory. Anyone have time to bench and test it?
Rodgers Moore, CCDP, CCNP-Security
Design and Security Consultant
Data Processing Sciences, Corp.
"luobin Yang" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi, group,
I have question quit
One small comment. Windows doesn't do CHAP, but rather MS-CHAP. They like
to prepend the domain name and a "\" in front of the user id. So it's not
compatible with plain old CHAP. In IOS versions prior to 12.0.1 MS-CHAP is
broken. And supposedly fixed since 12.0.1.
Rodgers Moore
ind the real
problem.
Rodgers Moore
"Hai Xu" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
My friend built a network like:
[Inside Lan192.168.1.0/24]---cisco2620---ISDN--[Outside]
When he ping sites outside, the first packet can re
ou limit the AS
path length you accept)? (Mr Pointy hair visits playboy.com frequently and
it's hosted off of ISP 1. ISP 1 and ISP 2 are twenty AS hops away from each
other. N is this case might be 10)
Rodgers Moore
""Chuck Larrieu"" [EMAIL PROTECTED] wrote in message
000b0
ication of this type of access list is to allow the
advertisement of a summary route or supernet and filter all of the subnet
routes. Thus reducing the routes advertised and overhead.
Rodgers Moore, CCDP, CCNP-Security
""Yee, Jason"" [EMAIL PROTECTED] wrote in message
859B90209
500. PAT breaks this, so NAT is
required. You then need to pass PROTOCOLS 50 and 51, NOT port numbers.
ESP and AH are just like ICMP, they have there own protocol numbers.
That's it,
Rodgers Moore
""Denao Ruttino"" [EMAIL PROTECTED] wrote in message
8op2h5$9ro$[EMAIL PROTECT
. I don't remember anything
about using HSRP for DECNET. (For that matter, I can't think of a reason
anyone would need HSRP for DECNET.)
I could be mistaken. I'd do a search of "HSRP DECNET" on CCO.
Rodgers Moore, CCDP, CCNP-Security
""Dove"" [EMAIL PROTECTED] wrote in me
. etc. etc.
To break from the 2514 (R3) to the 2503 (R2) you would type: Ctrl-Shift-6,
Ctrl-Shift-6, x
Rodgers Moore, CCNP, CCDP-Security
"folks" [EMAIL PROTECTED] wrote in message news:8nro8n$hnk$[EMAIL PROTECTED]...
Hi group
Recently , I have setup my network with 3 2500 routers
. Someone posted an example of pre-user access-lists here
some months back.)
Rodgers Moore, CCDP, CCNP-Security
""Donohue, Steve"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am using Cisco Secure to authenticate dial-in user
is WAY better than any Cisco router's clock).
Rodgers Moore
"peter whittle" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Does anyone know if Cisco E1 ATM IMA will interwork with Newbridge 36170
I
ace lo0
ip address 10.1.253.1 255.255.255.0
interface e0
ip address 10.0.2.1 255.255.255.0
interface to0
ip address 10.1.1.2 255.255.255.0
standby 1 priority 150
standby 1 ip 10.1.1.3
interface s0
ip address 10.1.0.5 255.255.255.252
router eigrp 1
passive-interface e0
network 10.0.0.0
Enjoy!
Rod
Implement HSRP on the routers.
Rodgers Moore, CCDP, CCNP-Security
""LB"" [EMAIL PROTECTED] wrote in message
8gi49s$p1e$[EMAIL PROTECTED]">news:8gi49s$p1e$[EMAIL PROTECTED]...
Hello Group,
I have a scenario where I am connected to two, ISP1 and ISP2. Both ISP's
You sure can, but as with any Microsoft networking using IP, it's almost a
black art. You'll be happier if you run WINS on the PDC and setup entries
in your LMHosts.
Rodgers Moore, CCDP, CCNP-Security
"rtootle" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAI
command or in the correct area.
For example:
int s0
ip ospf network point-to-multipoint non-broadcast
enjoy,
Rodgers Moore, CCDP, CCNP-Security
Leonardo Silva - Tecnologia wrote in message
41506A941272D311BBB10060089E2BB10F2CCB@EXCHANGESVRITC...
Group,
I sent this message and didn't get any reply.
I
84 matches
Mail list logo