[newbie] Re: NTLDR Missing Error -- Dual Boot

I'm not sure what I did, but I just tried re-installing everything on the same drive and it seems to work. Thanks. -- Frank Michel Leunen [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Frank L wrote: I just did a fresh install of XP Pro and Mandriva 10.2. Everything seemed

[newbie] NTLDR Missing Error -- Dual Boot

I just did a fresh install of XP Pro and Mandriva 10.2. Everything seemed to work fine, but when I tried to start XP I got the error message NTLDR is Missing Press Ctl Alt Del to restart. If I try to restart Windows I get the same error message. -- Frank L

[newbie] New Install Questions

on the 40GB drive (other drives will not be plugged in). b)Load Linux on 40GB drive (with all drives plugged in -- I assume this will recognize XP on 40GB drive for dual-boot and 200GB/110GB drives for storage) Any help would be appreciated. -- Frank L

[newbie] kde dead and gone

Right now I am unable to use kde or any of its apps. I appear to be getting the message that 'kdeinit' is either missing or dead. I am able to use xfce4 but not kppp nor it would seem, wvdial. So no connecting to the internet at present. (The wvdial thing is quitting with something to do with

Re: [newbie] kde dead and gone

Derek Jennings wrote: On Thursday 26 August 2004 09:11, Frank wrote: Right now I am unable to use kde or any of its apps. SNIP During my last session I installed QTCurve, a couple of session ago I installed nVidia for OpenGL. Also during the last session I did urpmi kdelibs and kdebase

Re: [newbie] URPMI

PM wrote: On Thu, 2004-08-26 at 14:17, Wolfdreamer wrote: Hi me again. Ok, Ive managed to break URPMI again. I've some how managed to get it to disable the links for: international CD (x86) (cdrom2) international CD (x86) (cdrom3) and when I try using the X configure sources thing it tells me

Re: [newbie] Mandrakelinux to improve ergonomics and usability

Please turn off your Request Notification facility. lewee wrote: Here are the announcements : RECHERCHE BENEVOLES POUR TESTS DERGONOMIE Mandrakesoft recherche des utilisateurs volontaires afin de mener bien une valuation ergonomique de Mandrakelinux 10.0. Chaque volontaire pourra participer

Re: [newbie] Video Software

AL wrote: Hi! Is there an equivalent software like DVD2SVCD for Mandrake 10? Thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] Full install with Mandrake 10?

Dennis Myers wrote: On Tuesday 10 August 2004 10:27 am, Thomas Wilkowski wrote: There is not an option for total install and if you have one of the power-packs it would be a pretty huge install indeed. I would suggest choosing Select Individual Packages as you mentioned and then press the next

Re: [newbie] Stopped printing.

Keith Powell wrote: On Monday 02 Aug 2004 14:04, PM wrote: On Mon, 2004-08-02 at 15:44, Keith Powell wrote: I have an Epson Stylus 670 printer and it has suddenly stopped printing from Mandrake (although it will still print correctly from other distros). I haven't altered anything since it

Re: [newbie] Stopped printing.

Hoyt Bailey wrote: On Tuesday 03 August 2004 03:17, Frank wrote: Keith Powell wrote: On Monday 02 Aug 2004 14:04, PM wrote: On Mon, 2004-08-02 at 15:44, Keith Powell wrote: I have an Epson Stylus 670 printer and it has suddenly stopped printing from Mandrake (although

Re: [newbie] Lost the lot - Hijacked = (MP3 to WAV in K3b?)

Also if you want to go down real hard, run a 2.4 kernel, and upgrade to a 2.6 kernel. Reboot to the 2.6. If you come out alive, you are luckier than I. I lost my whole system, no way back. Rob Even as a newbie, I can see you had 'something' go wrong, but to lose the lot. Nah! I may have

Re: [newbie] Building Kernel

Kevin Ferguson wrote: Frank wrote: Kevin Ferguson wrote: Hi Guys Just a quickie. I'm experiementing at the moment. I have Mandrake 10 CE, with Kernel 2.6.3-4mdk installed. I'm wanting to build my kernel from source, the lastest kernel I'm downloading is 2.6.7. Is if ok for me to go ahead

Re: [newbie] Package list help.

OK. A favour for a favour, ( I hope? ) # rpm -qa Thats the command, now what do I add to the end of it to successfully pipe it to a text file? Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Hoyt Bailey wrote: On Friday 30 July

Re: [newbie] Package list help.

Josenildo Marques wrote: Em Sáb, 2004-07-31 às 07:28, Frank escreveu: OK. A favour for a favour, ( I hope? ) # rpm -qa That's the command, now what do I add to the end of it to successfully pipe it to a text file? There you are rpm -qa mypkgs.txt So used to typing letters

Re: [newbie] Package list help.

Now to be really helpful and thanked, it would be great to see the whole script COMPLETE WITH comments so that some of us slower newbies might actually get to learn something. ( NO sarcasm intended - I just couldn't find the elegant way on a Sunday.) Regards SnapafunFrank Big or small, a

Re: [newbie] Building Kernel

Kevin Ferguson wrote: Hi Guys Just a quickie. I'm experiementing at the moment. I have Mandrake 10 CE, with Kernel 2.6.3-4mdk installed. I'm wanting to build my kernel from source, the lastest kernel I'm downloading is 2.6.7. Is if ok for me to go ahead and build the source? Would I need

Re: [newbie] Update from 9.1 to 10.0 done!

. The problems I have remind me alot of my windows days. At least MDK10 appears to recover better and lilo has not acted up once - pluses for carrying on with it. Trouble is it takes a reboot to recover. Now that is too much like windows. Regards Frank Big or small, a challenge requires the same

Re: [newbie] backup/restore/repartitioning

=222page=1 Backing up to CDs Made Simple: Version 1.1 total words in this text) (14888 Reads)by LinuxOrbit.com: January 15. 2002 by David LeCount Should get you stared at least. Enjoy. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213

Re: [newbie] Intel PRO/Wireless 2200BG

. Re: If all this is too obvious This way there is no doubt and a newbie gets involved. Thanks for at least helping me Kaj. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213

Re: [newbie] New drive install

physically install it. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club

Re: [newbie] Gimp 1.2 and 2.0 together on one system

I too have them together. I have only one prob to date: Might be me not configuring enough though. For those that have yet to give this a work out, try using your scanner from each of them to acquire something and let us know the result. Regards Frank Big or small, a challenge requires the same

Re: [newbie] import ms fonts?

Use MCC System Fonts Import ; It's quite good now though I haven't tried it with XP. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Angus Auld wrote: Hi everyone, I finally have installed Mdk10.0, and I'm in the process

Re: [newbie] switching from fedora core, need some advice

Justin Grote wrote: Hi Chris! Welcome to Mandrake. I've been a Fedora user too, and I think you'll come to find that Mandrake gives you great consumer flexibility, while being a very powerful server as well. It's not better than any other linux distro, just different (as they all are). I'll

Re: [newbie] Wine 20040213

Had the same problems recently: try; #urpmi glibc-static [ The GUI way is pretty much how Chuck describes it.] And to run notepad the command is simply: $notepad [ You don't use all the rest like you WILL do when you start installing other programs.] Regards Frank Big or small, a challenge

Re: [newbie] partition suggestions?

At 03:59 PM 6/27/04, John Drouhard wrote: I got a new hard drive today. (yay!) It is 160 GB Maxtor and I don't know how to chop it up. Are you the only user and you have no remote access (apache, mail, ftp, etc) services running? Go with one big partition. Multiple partitions are for

[newbie] Acerfirm installed OK

.) Prisa 620U+/640U -- Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http

Re: [newbie] Multipal copies of same message

Nope! Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Hoyt Bailey wrote: Is anyone else getting 3 or 4 copies of each message. Whats causing

Re: [newbie] Database Recommendations?

At 03:34 PM 6/21/04, Aidan Holmes wrote: Hello all, Can anyone recommend a good database application for my needs? I have searched the net on the subject and just get myself more and more confused about what I need to run. MySQL seems to be the one everyone raves about, but it's far too powerful

[newbie] kbluetoothd

-4mdk) scriptlet failed, exit status 1* ## Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from

Re: [newbie] Font for Website

, you cannot specify a particular font only, because it is the visitors browser settings and type that ultimately decides that. Hope this is of some help. If you get to host your page, let us know. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux

Re: [newbie] LILO

So does this mean that you can boot by some means? If so, then as 'su' issue # /sbin/lilo and take not of any errors. Let us know. PS. Did you try testdisk . Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Teilhard Knight wrote

Re: [newbie] OT/semi-lenghty: Any advice for a newbie programmer?

And with your limited time, should you decide C then drop me a line, 'cause I'm interested and know that two heads are always better than one! ( Frank at Snapafun.co.nz ) [Have started reading 'Sams Teach Yourself C for Linux Programming. Hoyt is right - not easy but a manageable challenge

Re: [newbie] Dedicated DNS Server

At 04:52 PM 6/15/04, Travis Crook wrote: Anyone know of a way to run a dedicated DNS server that can be administrated through a Web interface? I'm thinking something along the lines of Smoothwall (firewall) where I can set up a box to be just a DNS server and nothing else. If it runs

Re: [newbie] *.iso.bin??

How did you do the initial installation? If you used discs then simply insert the first one again and select 'Repair' or 'Rescue' and follow the prompts. Don't forget to make a emergency startup disc this time, happen you have a floppy drive. Frank Paul Harradine wrote: Curt, try renaming

Re: [newbie] Acrobat weblinks and Linux

Don't forget to use the print dialogues from the PDF menu bar and not from the Browser menu bar. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Erylon Hines wrote: On Monday 07 June 2004 07:56 pm, Greg wrote: | | Does any one

[newbie] Konqueror autocomplete forms

I cannot find the place in Konqueror to clear the forms autocomplete history. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com

Re: [newbie] Konqueror autocomplete forms

Thanks - that did the trick... At 05:45 PM 5/27/04, bascule wrote: the file that stores them is ~/.kde/share/apps/khtml/formcompletions bascule On Thursday 27 May 2004 10:25 pm, Frank Bax wrote: I cannot find the place in Konqueror to clear the forms autocomplete history

Re: [newbie] Setting Up Intellimouse Optical on Mandrake 10

a readout? If so then keep looking for ways to get it working 'cause your system sees them. Try google for 'keymapping' is just yet another suggestion. Keep us informed as to your successes. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213

Re: [newbie] undelivered mail notices

mailserver bounces messages to the wrong email address. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com

Re: [newbie] Checking disk size from C

Errr This newbie thought that windows dosen't see other partitions not FAT formated or whatever. Whilst inside windows try MS-DOS and issue fdisk and follow the prompts. Not sure if this is what you are doing, just thought I'ld mention it. Regards Frank Big or small, a challenge

[newbie] AutoCAD2000LT

imported from LC:\\Program Files\\AutoCAD LT 2000\\aclt.exe, setting to 0xdeadbeef edited past here And as user and issuing: [EMAIL PROTECTED] frank]$ wine aclt.exe wine: cannot find 'aclt.exe At this point I have stretched my hacking skills to the limit so seek pointers from anyone who has got

Re: [newbie] Why is my FAT always corrupted by Linux?

. Enjoy Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Marc Lijour wrote: Le May 13, 2004 05:00 pm, David A. Ferguson a écrit : I dual boot between Linux and W2k. I store the shared data on a FAT. Whenever I write to it from

Re: [newbie] DNS questions

At 11:04 AM 5/11/04, Frank Bax wrote: At 09:56 AM 5/11/04, Anders Lind wrote: On Tue, 11 May 2004 09:51:18 -0400 Frank Bax [EMAIL PROTECTED] wrote: I have three Linux machines on the same network with a bunch of windows machines. The ip address of the server hosting corporate email changed

[newbie] DNS questions

to the old ip address. reboot didn't help. Third linux machine and windows machines are working fine. Looks like a dns issue. What tools do I use to determine which nameserver Linux is using, what ip address that name server is providing for the server we are trying to reach? Frank

Re: [newbie] DNS questions

At 09:56 AM 5/11/04, Anders Lind wrote: On Tue, 11 May 2004 09:51:18 -0400 Frank Bax [EMAIL PROTECTED] wrote: I have three Linux machines on the same network with a bunch of windows machines. The ip address of the server hosting corporate email changed last week, but the old ip address

Re: [newbie] 10

me with fewer problems. As I am still new to Linux, I can only offer the above as my own perceived experience. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 John Wilson wrote: On May 8, 2004 04:39 pm, Phlip J Scott wrote

Re: [newbie] 10

me with fewer problems. As I am still new to Linux, I can only offer the above as my own perceived experience. Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 John Wilson wrote: On May 8, 2004 04:39 pm, Phlip J Scott wrote

Re: [newbie] Got my sound working, sort of

to bed. Still, some of us are just glutens for punishment. Thanks for your reply, through that I will learn and some day be able to repay the kindness. Kind Regards Frank [EMAIL PROTECTED] Whether big or small, any challenge requires the same commitment. -- Outgoing mail is certified Virus

Re: [newbie] Got my sound working, sort of

I switched to that How do you do that? And yeah, be as dumb instructive as you like 'cause I'm likely to mess it up otherwise. Ta -- Regards Frank [EMAIL PROTECTED] Whether big or small, any challenge requires the same commitment. Ron Hunter-Duvar wrote: I finally got my sound working

Re: [newbie] SETI

At 12:14 PM 5/1/04, JRH wrote: I have seen people here and in other places taling about SETI. I'm well aware of who they are, and what they do etc. How can I come by the software to allow me to give some unused bandwidth? http://setiathome.berkeley.edu/unix.html I'm using

Re: [newbie] Access Denied

with: sudo cp /mnt/removable/somfile [target] Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com

Re: [newbie] howto addmedia

Try this for now: # urpmi.addmedia --update new-updates ftp://ftp.proxad.net/mirrors1/ftp.mandrake-linux.com/Mandrakelinux/official/updates/10.0/RPMS with ../base/hdlist.cz Enjoy SnapafunFrank On Sun, 2004-04-18 at 21:55, Thujan wrote: Kaj Haulrich kirjoitti viestissn (lhetysaika

Re: [newbie] updates

what media you have by viewing /etc/urpmi/urpmi.conf Know also that with a little renaming of your media you can have extra sites listed for simular media. Enjoy Frank On Fri, 2004-04-16 at 20:00, Kaj Haulrich wrote: On Friday 16 April 2004 09:50, Thujan wrote: Hi, I just installed mdk10.0 C

Re: [newbie] bootloader reinstall prob.

. Enjoy Frank On Sun, 2004-04-11 at 07:45, martin brandt wrote: Quoting martin brandt [EMAIL PROTECTED]: Quoting John Richard Smith [EMAIL PROTECTED]: martin brandt wrote: Quoting et [EMAIL PROTECTED]: OK so /home is a seperate partition /dev/hda3 and something is wrong

Re: [newbie] Easy urpmi

Try this instaead: ftp://ftp.rpmfind.net/linux/Mandrake-devel/contrib/i586/synthesis.hdlist2.cz Suggest your issue as su: #urpmi.removemedia contib Then: urpmi.addmedia ftp://ftp.rpmfind.net/linux/Mandrake-devel/contrib/i586/synthesis.hdlist2.cz Then go and enjoy yourself Frank On Thu

Re: [newbie] Easy urpmi

contrib ftp://ftp.rpmfind.net/linux/Mandrake-devel/contrib/i586/synthesis.hdlist2.cz Then go and enjoy yourself Frank On Thu, 2004-04-08 at 04:51, Dan Gordon wrote: Just had a look at the easy urpmi site and the banner at the top of the page states ! ALL 10.0 MIRRORS ARE BROKEN. Mandrake team

Re: [newbie] bootloader reinstall prob.

Another way is to elect Expert when instalation reaches Summary and simply edit out that particular entry and worry about it later because you seem to have enough other options toproceed for now. Enjoy Frank On Fri, 2004-04-09 at 00:24, John Richard Smith wrote: martin brandt wrote: After

Re: [newbie] How to upgrade a soft?

Try # urpmi k3b0.11.5-0 If that dosen,t work then do: #urpmi.update [or at least visit www.urpmi.org and learn this] Enjoy Frank On Fri, 2004-04-09 at 02:36, rhein wrote: Hello, Stupid question but if I want to upgrade for example K3b 0.9.10 (who came with the mdk 9.2 cds) to the last

Re: [newbie] mandrake 10 community ISO problem

happen with 9.1. Otherwise enjoy. -- Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 John Wilson wrote: On April 2, 2004 06:36 am, Pete Doak wrote: snippity, snip, snip When I popped the CD-1 in the CD drive

Re: [newbie] Won't boot up now.

Just shove in your Community disc and elect 'update Be sure to study any chance you get partition, er. formating! [ I mean, think carefully of what it is you need at the end of the day Enjoy -- Regards Frank [EMAIL PROTECTED] Whether big or small, any challenge requires the same

Re: [newbie] sound in mdk 10

It might be that MandrakeMove is using the 2.4.x kernel whilst Mandrake 10 installs the 2.6.3 kernel. Please correct me if I got that wrong, but if so, then what do we need to do to get sound working on slightly earlier systems? -- Regards Frank Big or small, a challenge requires the same

[newbie] Lawless Community

Lawless Mandrake10 Community. Any suggestions anyone? Oh, and the main reason for doing the Mandrake10 thing was 'cause I could not get KDE into sound even though sound was there at the start and the test sound made nice noise. Now with KDE3.2 -- dead silence. -- Regards Frank Big or small

Re: [newbie] sound in mdk 10

please share with me so as I might learn how to do this myself. -- Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from MandrakeSoft? Go

[newbie] pnp monitor

I changed the monitor on a MDK91 system, and the system still retains name of old monitor - both monitors are pnp. Shouldn't the system detect the change and update config? Want to buy your Pack or Services from MandrakeSoft? Go to

Re: [newbie] Windows bigger than the screen

' button. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com

Re: [newbie] openoffice sous win et linux?

At 08:45 AM 3/16/04, Lee Wiggers wrote: On Tue, 16 Mar 2004 13:39:47 + Olivier Esser [EMAIL PROTECTED] wrote: Hello everybody, Please excuse me!. I am subscribed to both French and English list and I have use the wrong address! My problem was that a same word document does not open

Re: [newbie] Router Question

At 08:22 PM 1/31/04, aronsmith wrote: On Sat, 2004-01-31 at 16:56, JoeHill wrote: On Sat, 31 Jan 2004 15:52:28 -0800 aronsmith disseminated the following: OK.. I got off my dead arse and bought a small hard drive some ram and 3 NICs for the spare box I want to make a firewall/router out of

Re: [newbie] CD-ROM drive freezes Mandrake 9.2

At 11:35 AM 1/30/04, Viking Skull wrote: Hey everyone! Just recently signed up! I've been using Mandrake for maybe a week now, but I'm having a major problem. Whenever I try to access the CD-ROM drive it just freezes the desktop.. I cant play music CD's and i cant do anything with data CD's

Re: [newbie] Video Card Problems

At 09:48 AM 1/28/04, [EMAIL PROTECTED] wrote: Hi again everyone. I've finally got Mandrake 92 up and running, can get to kde, got my video card configured, but somethings not quite right. When I have the resolution at 800x600 my screen is too small for the resolution, I need to move the mouse

Re: [newbie] What is CD3 for?

it is for? CD3 for installing packages contained on that cd - browse it to find out what they are. Selecting OpenOffice and a language other than US-English will trigger prompt for CD3. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] Upgraded to 92 :(

At 07:00 PM 1/19/04, Mike Adolf wrote: Problem 3: (minor) 92 swiped my control center icon from the lower task bar! Right click on the task bar - you will find options to add MCC icon. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] MDK92 - cannot print

At 08:04 AM 1/19/04, Bryan Phinney wrote: On Sunday 18 January 2004 07:51 pm, Frank Bax wrote: No jobs in queue. Konica is a network printer (printing to it from MDK91 Win98 works fine). The same error also happens with a usb printer. Can you give us the exact printer make and model. I

Re: [newbie] MDK92 - cannot print

At 12:03 PM 1/19/04, Aron Smith wrote: On Mon, 19 Jan 2004 11:02:11 -0500 Frank Bax [EMAIL PROTECTED] wrote: At 08:04 AM 1/19/04, Bryan Phinney wrote: On Sunday 18 January 2004 07:51 pm, Frank Bax wrote: No jobs in queue. Konica is a network printer (printing to it from MDK91 Win98

Re: [newbie] MDK92 - cannot print

At 10:05 AM 1/17/04, Aron Smith wrote: On Sat, 17 Jan 2004 09:43:28 -0500 Frank Bax [EMAIL PROTECTED] wrote: Thanks to help from Bryan earlier in the week for fixing CUPS so I could add a printer. But on that day, I never bothered to actually print anything. When I try to print a test page

[newbie] MDK92 - cannot print

on a working MDK91 system. I tried setting LogLevel to debug, but it didn't seem to add anything useful. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] default permissions

that users in this group will use 664 permissions? Frank At 09:46 AM 1/15/04, Pablo Vitoria wrote: Hi Frank, The 'if[...' line means: If the effective user name and the effective group name running the shell are the same, and the user ID is greather than 99 (to exclude special accounts like root

Re: [newbie] 9.2 - Cannot setup printer - works!

At 06:59 AM 1/14/04, Bryan Phinney wrote: On Tuesday 13 January 2004 10:59 pm, Frank Bax wrote: /etc/cups/cupsd.conf BrowseInterval 0 Browsing Off Should have some additional lines: LogLevel Info TempDir /var/spool/cups/tmp Port 631 Browsing On #(You need to turn browsing on if you want

Re: [newbie] 9.2 - Cannot setup printer

At 06:43 AM 1/13/04, Bryan Phinney wrote: On Monday 12 January 2004 09:06 pm, Frank Bax wrote: An error occured while loading http://localhost:631/: Could not connect to host localhost (port 631) Is it possible that your firewall is disallowing local connections to port 631? How do I check

Re: [newbie] 9.2 - Cannot setup printer

At 08:25 AM 1/13/04, Bryan Phinney wrote: On Tuesday 13 January 2004 08:05 am, Frank Bax wrote: How do I check that - I did not consciously install/configure firewall. Frank, just to provide some background info, the cups daemon listens on port 631 for connections, both for admin and printing

Re: [newbie] 9.2 - Cannot setup printer

At 09:29 AM 1/13/04, Bryan Phinney wrote: On Tuesday 13 January 2004 09:19 am, Frank Bax wrote: CUPS daemon was not running - it's running now cupsd (pid 2699) is running... A quick check of /var/log/cups/error_log and I found a little problem with hostname, so I fixed

Re: [newbie] 9.2 - Cannot setup printer

At 02:44 PM 1/13/04, Bryan Phinney wrote: On Tuesday 13 January 2004 11:03 am, Frank Bax wrote: No log entry when accessing browser interface. When trying to add printer through PrinterDrake, I get a shutdown entry (3 times) when Making printer available to cups. In fact, only message

Re: [newbie] 9.2 - Cannot setup printer

At 07:09 AM 1/12/04, Bryan Phinney wrote: On Sunday 11 January 2004 08:33 pm, Frank Bax wrote: I think you are right, but my recollection (with MDK91) is that CUPS it is not installed until the first time you run PrinterDrake. But on this system I never ran PrinterDrake on MDK91 before

Re: [newbie] 9.2 - Cannot setup printer

At 08:03 PM 1/12/04, Bryan Phinney wrote: On Monday 12 January 2004 10:10 pm, Frank Bax wrote: In MCC rpmDrake, I searched for 'cups' and noticed several packages were not installed, so installed them. The next time I ran PrinterDrake, a bunch more (6 or more?) packages were also installed

Re: [newbie] 9.2 - Cannot setup printer

At 09:59 AM 1/11/04, Bryan Phinney wrote: On Sunday 11 January 2004 08:46 am, Frank Bax wrote: The print server is not connected to parallel port - it has it's own ip address. I am able to physically connect the printer to either print server or the parallel port, but cannot get either one

[newbie] 9.2 - Cannot setup printer

if I change the name or just leave it as Printer, when I click Next, I get Failed to configure printer Printer. How can I setup my printer? Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] 9.2 - Cannot setup printer

for manual setup, so I thought I would try to configure printer locally, then change connection type to remote. Frank At 11:22 PM 1/10/04, Troy T. Hall wrote: From the manual If you want to use a parallel printer connected locally to your machine, make sure that the parallel port mode is set to ECP+EPP

Re: [newbie] Download Mandrake and make discs

will now have to go back to the other side, because using 'dialup' will be around for a while yet. -- Regards Frank Big or small, a challenge requires the same commitment to resolve. Registered Linux User # 324213 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] SHould I get SuSe

to upgrade one and not others. Then you must maintain multiple copies of these big downloads. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] MDK9.1 - Konqueror select boxes

At 01:07 PM 10/30/03, Frank Bax wrote: I'd also like to hear from anyone using 9.2 to see if same problem presents itself. On web pages with (pulldown) select boxes, what happens when you use the keyboard is difficult to describe in abstract terms, so I'll use an example. If you visit any

Re: [newbie] grub lilo

lilo moves on to the second screen, well, I get to boot successfully usually after the third or fourth try. I have had this problem since Mandrake9.0 and it gets annoying when my system will not boot up first time each day. I guess that makes this a con for lilo then? -- Regards Frank Big

Re: [newbie] I'm goin' mobile....

At 01:20 PM 10/21/03, Greg Meyer wrote: On Tuesday 21 October 2003 12:54 pm, Grant wrote: I'll be traveling off and on for the foreseable future, and I don't want to bring a laptop. What I'd like is some kind of a setup that allows me to connect to a remote machine that I've set up and use my

Re: [newbie] Maxtor Hard Drive Dual-Slave Jumper Setting?

of pins next to IDE connector. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

Re: [newbie] Tight VNC

I found this message in archives without any solution to help me. I had the same problem with TightVNC from MDK91 cdrom - the solution that worked for me was to upgrade the two qt3 rpms. Frank At 09:04 AM 8/30/03, [EMAIL PROTECTED] wrote: hi there! i just reinstalled mdk 9.1. after that i

[newbie] MDK91 does not boot

is available fstab so I could migrate /home stuff). Frank Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com

[newbie] MDK91 - OpenOffice network printing

printerdrake are available to OOo (they appear as printer), but I would like to make one of these printers the default printer. When I run spadmin, these printers are not defined! If I try to define one of these printers, appropriate drives are not available. Frank Want to buy your Pack or Services

[newbie] Newbie qmake configuration for Md 9.1

of grief. Frank # # $Id: qt/qmake.conf 3.1.1 edited Nov 14 09:50 $ # # qmake configuration for linux-g++ # MAKEFILE_GENERATOR = UNIX TEMPLATE= app CONFIG += qt warn_on release incremental

Re: [newbie] MS is at it again...

Hi All Every now and again emotions exceed politeness to such an extent that pasions are inflamed beyond tolerance. Oh well I guess that is why the linux gods created email filters. Lets see now. Open Settings Open Configure Filters Set Filter Apply Rudeness problem disappeared. Want to

Re: [newbie] Broken KDE

On Saturday 19 July 2003 19:30, drew wrote: Hello All, I've broken KDE somehow,I've lost the ability to install RPM's from it.Everything works OK in Gnome. Has anyone got any idea how to fix it? Drew Which distribution are you using? Want to buy your

Re: [newbie] MS is at it again...

by recovery disk after you reposition the HD. 3. You can reinstall Windows by either formating the HD (Windows partition only) or install Windows as a recovery which does leave all the programs on the HD. Frank Want to buy your Pack or Services from MandrakeSoft? Go to http

  1   2   3   >