On gio, 2013-12-26 at 16:28 -0600, Charles Steinkuehler wrote:
On 12/26/2013 3:52 PM, EBo wrote:
On Dec 26 2013 2:47 PM, Viesturs Lācis wrote:
2013/12/26 Andrew pkm...@gmail.com
Yes, that is very reasonable. Just calculate the scale and use
usual
planning.
The task can also be
Il giorno mer, 02/05/2012 alle 22.36 +0800, Yishin Li ha scritto:
On Tue, May 1, 2012 at 9:26 PM, Spiderdab 77...@tiscali.it wrote:
Il giorno mar, 01/05/2012 alle 15.56 +0300, Viesturs Lācis ha scritto:
No, Yi-shin was talking about three-dimensional nurbs.
I'm interested too
Il giorno gio, 03/05/2012 alle 11.15 +0800, Yishin Li ha scritto:
On Thu, May 3, 2012 at 7:43 AM, Spiderdab 77...@tiscali.it wrote:
Thanks Yishin for the explaination, but what didi you use to translate
NURBS to your modified G-Code? i assume a personalized script, but with
some known
Il giorno lun, 30/04/2012 alle 19.55 -0500, sam sokolik ha scritto:
http://linuxcnc.org/docs/2.5/html/gcode/gcode.html#_g5_2_g5_3_nurbs_block_a_id_sec_g5_2_g5_3_nurbs_a
Sounds like testing would be good
No, Yi-shin was talking about three-dimensional nurbs.
I'm interested too in trying that
Il giorno mar, 01/05/2012 alle 15.56 +0300, Viesturs Lācis ha scritto:
2012/5/1 Spiderdab 77...@tiscali.it:
Il giorno lun, 30/04/2012 alle 19.55 -0500, sam sokolik ha scritto:
http://linuxcnc.org/docs/2.5/html/gcode/gcode.html#_g5_2_g5_3_nurbs_block_a_id_sec_g5_2_g5_3_nurbs_a
Sounds like
Il giorno mar, 01/05/2012 alle 17.02 +0300, Viesturs Lācis ha scritto:
2012/5/1 Spiderdab 77...@tiscali.it:
Il giorno mar, 01/05/2012 alle 15.56 +0300, Viesturs Lācis ha scritto:
2012/5/1 Spiderdab 77...@tiscali.it:
Il giorno lun, 30/04/2012 alle 19.55 -0500, sam sokolik ha scritto
Il giorno gio, 26/04/2012 alle 13.53 +0300, Viesturs Lācis ha scritto:
2012/4/26 Michael Haberler mai...@mah.priv.at:
The only gotcha I see is - this is coord mode, so its axes not joints
input, this might be a bit confusing for an MPG and a non-trivkin machine
Well, I think that it is
Il giorno ven, 30/03/2012 alle 16.08 +0800, Yishin Li ha scritto:
On Fri, Mar 30, 2012 at 9:15 AM, Xuecheng Xi xixuech...@gmail.com
wrote:
Dear Yishin:
I am quite interested in your implementation of NURBS and
S-curve in
EMC2. We are also using EMC2
Il giorno ven, 30/03/2012 alle 21.46 +0800, Yishin Li ha scritto:
On Fri, Mar 30, 2012 at 9:06 PM, Spiderdab 77...@tiscali.it wrote:
Il giorno ven, 30/03/2012 alle 16.08 +0800, Yishin Li ha
scritto:
On Fri, Mar 30, 2012 at 9:15 AM, Xuecheng Xi
xixuech
Il giorno lun, 13/02/2012 alle 20.23 -0600, Jon Elson ha scritto:
Spiderdab wrote:
Yes I've tried using G64, but maybe i didn't know how this worked.
because i didn't have the expected resulting.
Just because you mentioned, is it correct to use such a line at the
beginning of the g-code
Il giorno mar, 14/02/2012 alle 12.04 -0600, Jon Elson ha scritto:
Michał Geszkiewicz wrote:
W dniu 14.02.2012 14:28, Spiderdab pisze:
and, I really cannot understand what Q does (naive) and if you have to
use Q together with P or without.
P value is maximum deviation of path
Il giorno mar, 14/02/2012 alle 12.02 -0600, Jon Elson ha scritto:
Spiderdab wrote:
It is G64.1 Pxxx. G64 turns on some smoothing, G64.1 turns on more (and
I'm
vastly oversimplifying it.) Well, maybe they have changed it, but I'm
pretty sure
I used G64.1 Pxxx, but looking
Il giorno dom, 12/02/2012 alle 19.48 -0600, Jon Elson ha scritto:
Mark Haynes wrote:
For recording movements at every 1/2 second intervals is the g-code file
that you play back consist of a new line for each 1/2 second? So that every
line of g-code is a x,y,z, and feedrate value for that
Il giorno lun, 13/02/2012 alle 11.48 +0100, Michael Haberler ha scritto:
Am 13.02.2012 um 10:14 schrieb Spiderdab:
I'm sure with my pc i can have an higher recording rate. The problem is
that when i've tried to record every 1/10 of sec doing rapid 3D
movements (let's say 1 m/s) the curve
Il giorno lun, 13/02/2012 alle 11.12 -0600, Jon Elson ha scritto:
Spiderdab wrote:
I'm sure with my pc i can have an higher recording rate. The problem is
that when i've tried to record every 1/10 of sec doing rapid 3D
movements (let's say 1 m/s) the curve is recorded in little lines (one
Il giorno ven, 10/02/2012 alle 14.08 -0500, Mark Haynes ha scritto:
Hello Everyone,
...cut...
Finally, I have been looking for a good movement recording feature for CNC
applications. Such as being able to record the users movement of the machine
and then have G-code automatically generated
Hi gentle people,
I've realized that there are some issues on soft limits, when using
not-trivial kinematics.
I'm using now the JA3 branch, but i remember i had the same results with
2.4.x ...if somebody wants to confirm is welcome.
i.e. into axis, those limits, which are drawn like red dotted
On ven, 2012-01-27 at 17:27 +, andy pugh wrote:
On 27 January 2012 17:18, Spiderdab 77...@tiscali.it wrote:
I personally think this kind of bug are of a main importance, and that
also should be simple to solve
I am not sure it is, in the general case..
Working out the boundary
On sab, 2012-01-28 at 02:02 +0100, Spiderdab wrote:
On sab, 2012-01-28 at 00:38 +, andy pugh wrote:
On 28 January 2012 00:28, Spiderdab 77...@tiscali.it wrote:
Hi, for sure this is a rare case, but i need to loadrt two logic
components.
loadrt logic count=2 personality=2,7
Il giorno gio, 26/01/2012 alle 07.48 +0100, Michael Haberler ha scritto:
Am 25.01.2012 um 23:46 schrieb Spiderdab:
On mer, 2012-01-25 at 20:39 +0100, Michael Haberler wrote:
Hi Davide,
why dont you just do this for edge detection (adapted from
configs/gladevcp/complex/complex.py
schrieb Spiderdab:
It works!
I don't know how much it could be useful for other, but here is the
modified hal_glib.py code. I added 'value-is-true' and 'value-is-false'
to evaluate a bit-pin state.
added the GBitPin Class, so it is not mixed with GPin.
I'm attaching this code
Hi,
I suggest you to post here also your .ini file, to see your HOME and
HOME_OFFSET values (as per the PM i sent you.).
My idea (correct me if i'm wrong) is that the home position of one or
more of the joints, conflicts with the real position that the arm can
have.
It happened to me with the
Hi, I added a png of my vismach realization into the vismach page here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Vismach
I wish i did the right thing.
BTW, I wrote LinuxCNC, and the result (as said) is 'LinuxCNC?'.
do I have to change into nowikiLinuxCNC/nowiki, right?
On lun, 2012-01-16 at 00:28 +0100, Spiderdab wrote:
On dom, 2012-01-15 at 17:06 -0600, Thomas Powderly wrote:
maybe
try using a cylinder for ropes
( or your line of cylinder primitive is only axial, not 3D , been a
while since i hacked vismach.py )
and add function HalScale using
On lun, 2012-01-16 at 15:18 -0800, noel wrote:
I think the community would like to see a short animation of your system.
Any chance you could post a video somewhere?
N.
Thanks for your interest.
Soon i'll rec some new video. New 570oz/in stepper just came this
morning at home from US. I'll go
Hello gentelmen.
It's some days i'm trying to get into vismach, and i understood one
thing (any correction is welcome!):
-You can update anything linked to a pin_hal into the drawing only
using: HalTranslate HalRotate. (is it?)
The problem is that i can't set for example the dimension of a box
On dom, 2012-01-15 at 17:06 -0600, Thomas Powderly wrote:
maybe
try using a cylinder for ropes
( or your line of cylinder primitive is only axial, not 3D , been a
while since i hacked vismach.py )
and add function HalScale using glScale, which could change object length
youd have to move
Hi, i'm running (by now only in sim) JA3 merged with 2.6, and also if it
runs, some of my hal net aren't working.
to start finding out why, i saw when running into the terminal this
error report:
dab@dab-tetra:~/emc2-dev$ . ./scripts/emc-environment
dab@dab-tetra:~/emc2-dev
$
On mar, 2012-01-10 at 08:05 +, Chris Morley wrote:
While working on a project I found wanted to use LED widgets as
indicators with out HAL pins.
With the HAL pins the LED are reset to follow the HAL pin so cannot be
set in the program.
This patch allows one to select 'HAL pin type' 0
Hello gents, do you think it's possible to extract/create new hal pin to
setup live-way axis min and max limits? (working on JA3 branch here..)
If not,are there other ways?
Thanks, Davide.
--
Ridiculously easy VDI. With
Hi, i'm still 'playing' with JA3 branch, trying to set it at best for my
needs.
I've found out that [AXIS_n] MAX_ACCELERATION is used either for manual
jogging, into teleop mode, and for gcode files and MDI commands. I guess
it's meant to be like that, but what i need is to have at least two
Hi, there's one thing isn't clear for me with speed.
I have an inverted tetrapod.
I've set [AXIS_n]MAX_VELOCITY to 1000.0 (in my case mm/s)
when i jog in teleop mode in X or Y or Z axis, i have this speed.
but when i jog in XY direction jog velocity is the sum-vector between X
and Y speed, so 1.4*
Il giorno lun, 12/12/2011 alle 12.02 +0100, Spiderdab ha scritto:
Hi, there's one thing isn't clear for me with speed.
I have an inverted tetrapod.
I've set [AXIS_n]MAX_VELOCITY to 1000.0 (in my case mm/s)
when i jog in teleop mode in X or Y or Z axis, i have this speed.
but when i jog in XY
Il giorno lun, 12/12/2011 alle 13.30 +0200, Alex Joni ha scritto:
Il giorno lun, 12/12/2011 alle 12.02 +0100, Spiderdab ha scritto:
Hi, there's one thing isn't clear for me with speed.
I have an inverted tetrapod.
I've set [AXIS_n]MAX_VELOCITY to 1000.0 (in my case mm/s)
when i jog
Il giorno lun, 12/12/2011 alle 12.12 +, andy pugh ha scritto:
On 12 December 2011 12:00, Spiderdab 77...@tiscali.it wrote:
So, apart from controlling that joint speed isn't violated into traj
planner, i think there's an error into the code that should be fixed to
make traj_max_vel
Il giorno lun, 12/12/2011 alle 12.52 +, andy pugh ha scritto:
On 12 December 2011 12:44, Spiderdab 77...@tiscali.it wrote:
Let's say my machine is a robot-arm with 6 dof, it's the same. if for
some reason i need to manual jog the X axis, and then XY axis together,
i do want
Il giorno mer, 30/11/2011 alle 16.44 +, andy pugh ha scritto:
On 30 November 2011 16:33, Spiderdab 77...@tiscali.it wrote:
any other idea?
No, it's a mystery to me. The ABORT sets all velocities to zero
prior to setting the selected axis to the requested speed, so it makes
sense
Il giorno lun, 05/12/2011 alle 13.41 +, andy pugh ha scritto:
On 5 December 2011 13:13, Spiderdab 77...@tiscali.it wrote:
if (axisJogging != -1) {
// ignore request to jog, if an axis is already jogging
return 0;
...
do you think it can be implicated on the issue
..in the meantime, i've also found another user having the same issue:
www.you*ube.com/watch?v=FgnxBaFFDi8
he confirmed me on e-mail.
in fact in the video, he's jogging only one axis at a time.
--
All the data
what about this part?
static int sendJogStop(int axis)
{
EMC_AXIS_ABORT emc_axis_abort_msg;
// in case of TELEOP mode we really need to send an TELEOP_VECTOR message
// not a simple AXIS_ABORT, as more than one axis would be moving
// (hint TELEOP mode is for
what about this part?
.
forgot to say it is in the halui.cc file, line 1352, emc 2.5.
I saw the same file into joint_axes3 branch, and there's not this part.
(there i can jog two or more axis at a time..)
--
All
..in the meantime, i've also found another user having the same issue:
http://www.youtube.com/watch?v=FgnxBaFFDi8
he confirmed me on e-mail.
in fact in the video, he's jogging only one axis at a time.
--
All the data
Il giorno lun, 05/12/2011 alle 15.28 +, andy pugh ha scritto:
On 5 December 2011 14:51, Spiderdab 77...@tiscali.it wrote:
what about this part?
That's the ZERO_EMC_POSE which you already tried killing.
I guess you could try doing it in both places?
ah, yes. but the lines were
Il giorno lun, 05/12/2011 alle 19.01 +0100, Michał Geszkiewicz ha
scritto:
If you want to make halui.jog-speed pin working in ja3 branch, comment
line 1223 (axis-teleop_tp.max_vel = axis-vel_limit;) in file
/src/emc/motion/control.c and recompile
regards,
Michael
.
regards
Michael
W dniu 05.12.2011 19:44, Spiderdab pisze:
Il giorno lun, 05/12/2011 alle 19.01 +0100, Michał Geszkiewicz ha
scritto:
If you want to make halui.jog-speed pin working in ja3 branch, comment
line 1223 (axis-teleop_tp.max_vel = axis-vel_limit;) in file
/src/emc/motion
Il giorno lun, 05/12/2011 alle 21.38 +0200, Viesturs Lācis ha scritto:
2011/12/5 Spiderdab 77...@tiscali.it:
What i see, trying to change values, is that i can now change with the
Joystick-Slider the speed set in halui.jog-speed, but it doesn't go
further than [JOINT_n]MAX_VELOCITY
scritto:
Yes this issue is known and it is in TODO in ja3
regards
Michael
W dniu 05.12.2011 22:40, Spiderdab pisze:
Il giorno lun, 05/12/2011 alle 21.38 +0200, Viesturs Lācis ha scritto:
2011/12/5 Spiderdab77...@tiscali.it:
What i see, trying to change values, is that i can now change
Il giorno mar, 29/11/2011 alle 18.32 +, andy pugh ha scritto:
On 29 November 2011 17:52, Spiderdab 77...@tiscali.it wrote:
Do someone knows why into Joints-Axes3 branch the pin halui.jog-speed
doesn't work?
I don't know, but if you are using ja3 then presumably you are
building your
Il giorno mer, 30/11/2011 alle 16.19 +, andy pugh ha scritto:
On 30 November 2011 15:46, Spiderdab 77...@tiscali.it wrote:
tell me, is it right what i'm doing: after any change in halui.cc i do
'make clean, then ./configure, make, sudo make setuid'?
No, that will take ages. You only
Il giorno mer, 30/11/2011 alle 16.44 +, andy pugh ha scritto:
On 30 November 2011 16:33, Spiderdab 77...@tiscali.it wrote:
any other idea?
No, it's a mystery to me. The ABORT sets all velocities to zero
prior to setting the selected axis to the requested speed, so it makes
sense
a question:
please, what's the best text editor to edit emc2 src files?
--
All the data continuously generated in your IT infrastructure
contains a definitive record of customers, application performance,
security
Il giorno mer, 30/11/2011 alle 13.32 -0500, Kent A. Reed ha scritto:
On 11/30/2011 12:49 PM, Spiderdab wrote:
a question:
please, what's the best text editor to edit emc2 src files?
Best? That's a good way to start a email storm:-)
Everyone has a favorite. I'm fond of nedit.
Old
Il giorno mer, 30/11/2011 alle 18.26 +, andy pugh ha scritto:
On 30 November 2011 17:49, Spiderdab 77...@tiscali.it wrote:
a question:
please, what's the best text editor to edit emc2 src files?
You might want to consider using an IDE, they tend to offer functions
like take me
;-) If you wanted an IDE I would point you to Ultimate++. But, the
way you asked the question is just baiting the dogs of Jihad. I also do
not know which is worst a flame war or a flame drizzle...
EBo --
If english was my language...try to ask me the same thing in italian,
let's see
Hallo!
Do someone knows why into Joints-Axes3 branch the pin halui.jog-speed
doesn't work?
i linked that with the joystick slider, and i can see into 'show hal
config' that it is linked and changing, but jog speed doesn't change.
i can jog only at 'axis-n-teleop-vel-limit' set into
Il giorno mar, 29/11/2011 alle 19.27 +, andy pugh ha scritto:
On 29 November 2011 19:04, Spiderdab 77...@tiscali.it wrote:
are you suggesting it's more simple to make joystick work as expected
into 2.5 than into JA3?
It might be. But I was thinking it might be a nice, simple
Hello, since i've found out i can finally jog with a joystick in world
mode using the joints_axes3 branch, i'm hitting my first wall.
so i'm here to ask how can i regulate the speed into world mode (also
called carthesian space.)
for example moving the jog-vel slider or the max-vel slider or the
Il giorno gio, 24/11/2011 alle 15.47 +0100, Spiderdab ha scritto:
Hello, since i've found out i can finally jog with a joystick in world
mode using the joints_axes3 branch, i'm hitting my first wall.
so i'm here to ask how can i regulate the speed into world mode (also
called carthesian
Hi all,
i would like to bring your attention on this problem (a bug? or a
missing feature?)
when into world mode, either with trivial or non-trivial kinematics you
cannot jog two analog axis at a time with a joystick, or a joypad.
I had this problem one year ago, than i'm trying again in these
Il giorno mer, 23/11/2011 alle 13.26 +, andy pugh ha scritto:
On 23 November 2011 11:45, Spiderdab 77...@tiscali.it wrote:
i would like to bring your attention on this problem (a bug? or a
missing feature?)
The comments around line 1376 here
http://git.linuxcnc.org/gitweb?p=emc2.git
Il giorno mer, 23/11/2011 alle 14.30 +, andy pugh ha scritto:
On 23 November 2011 14:12, Spiderdab 77...@tiscali.it wrote:
thanks for the link. i see another thing you could help me to find out.
line 1403 -
is the speed setting for teleop mode (is it world mode?).
the speed setting
Il giorno mer, 23/11/2011 alle 16.15 +, andy pugh ha scritto:
On 23 November 2011 14:54, Spiderdab 77...@tiscali.it wrote:
Perhaps that cise needs to move into the code that handles
halui.jog-axis-selected instead?
my poor english...what do you mean with 'cise'?
Not your english
Il giorno ven, 21/01/2011 alle 11.07 -0800, Gary McRobert ha scritto:
Hi
I had this happen to me also it was a different pin but the same error
message.
It had to do with having a another custom hal configuration file and
when I compiled
it used the wrong one producing the error.
I
Hallo, i wish is it right to ask for this here, in case tell me.
i was trying to use the master branch (first time), compliled ok.
tryed to run my setups and had this error, also tried a couple of given
steups, but i still have the same error:
dab-pod@dab-pod-desktop:~/emc2-dev/src$
emc
Il giorno ven, 21/01/2011 alle 13.04 +0100, Michał Geszkiewicz ha
scritto:
Please send output from dmesg command
regards
Michael
I'm on another pc, i'll do it soon, thanks.
Spiderdab pisze:
Hallo, i wish is it right to ask for this here, in case tell me.
i was trying to use the master
Il giorno ven, 21/01/2011 alle 13.17 +0100, Spiderdab ha scritto:
Il giorno ven, 21/01/2011 alle 13.04 +0100, Michał Geszkiewicz ha
scritto:
Please send output from dmesg command
regards
Michael
Spiderdab pisze:
Hallo, i wish is it right to ask for this here, in case tell me.
i
Il giorno mar, 18/01/2011 alle 22.40 -0600, Jon Elson ha scritto:
Chris Radek wrote:
It's in the DRO, a star on the Absolute numbers.
OK, I see it and now I know where to look for it.
This is because some of the ubuntu themes are crap. If you pick a
theme where it's
Il giorno mar, 21/12/2010 alle 21.30 +0100, Michał Geszkiewicz ha
scritto:
Read sample sim/gantry config file from joints_axes3 branch.
It has all changes that are needed for this branch.
regards
Michael
ok, thanks! i was looking at sim/scara, maybe wasn't good.
going to try. ciao. Davide.
Il giorno mar, 21/12/2010 alle 17.31 +0100, 77...@tiscali.it ha scritto:
Hallo, i'm trying to test the joints_axes3 branch, but i've firts
problems:
as i try to run one of my 2.4.6 configs, i got this:
dab-
p...@dab-pod-desktop:~$ ./emc2-dev/scripts/emc /home/dab-pod/emc2-
ok, i've solved that..
there's a new section in the ini file:
[kins]
..where to fill in with:
JOINTS = 4
KINEMATICS = mykins
thanks, the same..
i go on in trying..
Il giorno mar, 21/12/2010 alle 19.39 +0100, Spiderdab ha scritto:
Il giorno mar, 21/12/2010 alle 17.31 +0100, 77...@tiscali.it ha
hallo, i'm looking for help and confirmations about an issue that i
cannot resolve with using a joypad or a joystick to jog.
i'm discussing the problem on the forum:
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/id,4542/catid,24/limit,6/limitstart,6/lang,italian/#5708
Il 27/11/2010 23:40, Andy Pugh ha scritto:
On 26 November 2010 18:31, Spiderdab77...@tiscali.it wrote:
would like to know if you think there's a possibility of adding a more
flexible and 'live' control of acceleration ramps (i wish through g-code..).
the point is the need of doing some
Il 28/11/2010 19:14, Kirk Wallace ha scritto:
On Fri, 2010-11-26 at 19:31 +0100, Spiderdab wrote:
Hallo gentelmen developers, which i'm not..unfortunately.
i would like to take your attention on this thread :
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/id,5592
Hallo gentelmen developers, which i'm not..unfortunately.
i would like to take your attention on this thread :
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/id,5592/catid,20/limit,6/limitstart,0/lang,english/
that i started for asking about a new feature needed into emc2.
74 matches
Mail list logo
