Carlton Matthew wrote:
I have two PCs sharing the same internet router, which I would like to network
together.
Both PCs are running mandrake 10.1, but I can't seem to make any network
connections.
Do I need to install something like samba on both machines?
Thanks in Advance
Carlton
Carlton, In
On Thursday 17 March 2005 21:29, Carlton Matthew wrote:
I have two PCs sharing the same internet router, which I would like to
network together. Both PCs are running mandrake 10.1, but I can't seem to
make any network connections. Do I need to install something like samba on
both machines?
On Monday 07 March 2005 19:05, Derek Jennings wrote:
On Monday 07 March 2005 22:21, SOTL wrote:
Hi All
The good news is that I am able to connect from either of my computer to
the other by fish.
The bad fish news is that I do not understand how to log of fish's
connection to the
Hi All
Well the positive news is that I am able to connect the two computers and
transfer files by fish even though I am unable to log off the computer I am
SSH into without rebooting that computer so I have fish working with a slight
issues.
Next item on the Network agenda is to access the
On Tuesday 08 March 2005 11:27, SOTL wrote:
On Monday 07 March 2005 19:05, Derek Jennings wrote:
On Monday 07 March 2005 22:21, SOTL wrote:
Hi All
The good news is that I am able to connect from either of my computer
to the other by fish.
The bad fish news is that I do not
On Tuesday 08 March 2005 12:02, SOTL wrote:
Hi All
Well the positive news is that I am able to connect the two computers and
transfer files by fish even though I am unable to log off the computer I am
SSH into without rebooting that computer so I have fish working with a
slight issues.
On Tuesday 08 March 2005 15:12, SOTL wrote:
On Tuesday 08 March 2005 08:10, Derek Jennings wrote:
On Tuesday 08 March 2005 12:02, SOTL wrote:
To set up NFS in Mandrake install portmapper, nfs-utils and
nfs-utils-clients. On the server edit the file /etc/exports and
add lines in the
Hi All
The good news is that I am able to connect from either of my computer to the
other by fish.
The bad fish news is that I do not understand how to log of fish's connection
to the other computer.
Does anyone have any ideas of how to do this?
Thanks
Frank
Hi All
The good news is that I am able to connect from either of my computer to the
other by fish.
The bad fish news is that I do not understand how to log of fish's connection
to the other computer.
Does anyone have any ideas of how to do this?
Thanks
Frank
Spelling Correction
The bad
On Monday 07 March 2005 22:21, SOTL wrote:
Hi All
The good news is that I am able to connect from either of my computer to
the other by fish.
The bad fish news is that I do not understand how to log of fish's
connection to the other computer.
Does anyone have any ideas of how to do this?
On Sunday 27 February 2005 16:47, Mikkel L. Ellertson wrote:
SOTL wrote:
Hi All
Help !
Sorry for screaming but I do feel a bit better now.
I added 1 computer to the network so now there are a total of 3 as
follows:
MSI with name of Reality_Check @ 192.168.2.7 with
SOTL wrote:
On Sunday 27 February 2005 16:47, Mikkel L. Ellertson wrote:
---[ SNIP ]-
For networking problems, looking in the logs in /var/log is a good lace
to start. Especialy on the machine you are trying to connect to. A lot
of the time, you
Hi All
Please disregard following help request.
Issue disappeared when I realized that problem was caused by jarring box with
my foot causing HD drive not to be fully connected.
Box is test setup with sliding drawers in it so HD may be easily setting on
floor by my desk in position where foot
On Monday 28 February 2005 05:44 am, SOTL wrote:
Hi All
Please disregard following help request.
Issue disappeared when I realized that problem was caused by jarring box
with my foot causing HD drive not to be fully connected.
Box is test setup with sliding drawers in it so HD may be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 28 Feb 2005 13:44, SOTL wrote:
Hi All
Please disregard following help request.
Issue disappeared when I realized that problem was caused by jarring box
with my foot causing HD drive not to be fully connected.
Box is test setup with
Hi All
Help !
Sorry for screaming but I do feel a bit better now.
I added 1 computer to the network so now there are a total of 3 as follows:
MSI with name of Reality_Check @ 192.168.2.7 with Mandrake 10.1
HP with name Meatloaf_Night @ 192.168.2.9 with Mandrake 9.2
IBM with name
SOTL wrote:
Hi All
Help !
Sorry for screaming but I do feel a bit better now.
I added 1 computer to the network so now there are a total of 3 as follows:
MSI with name of Reality_Check @ 192.168.2.7 with Mandrake 10.1
HP with name Meatloaf_Night @ 192.168.2.9 with Mandrake 9.2
IBM
On Sunday 27 February 2005 16:47, Mikkel L. Ellertson wrote:
SOTL wrote:
Hi All
Help !
Sorry for screaming but I do feel a bit better now.
I added 1 computer to the network so now there are a total of 3 as
follows:
MSI with name of Reality_Check @ 192.168.2.7 with
On Thursday 24 February 2005 20:12, Derek Jennings wrote:
On Friday 25 February 2005 00:17, SOTL wrote:
Hi All
As a user not a geek I have worked with and used Linux for some time but
until recently I have not had the opportunity of using my computers on
anything but dial up internet
On Friday 25 February 2005 12:37, SOTL wrote:
I doubt very much if your hub is directly connected to the internet.
You mean it connects to a DSL modem or router? Both computers seem to
work, so they must both have IP addresses, and something is performing
NAT (Network Address Translation)
On Friday 25 February 2005 08:28, Derek Jennings wrote:
On Friday 25 February 2005 12:37, SOTL wrote:
snip
OK, So I imagine you are getting your IP addresses from your company DHCP
server. If you look at the connection info in Mandrake Control Centre you
should be able to see your IP
On Friday 25 February 2005 15:58, SOTL wrote:
SNIP
I can NOT find kio_fish when I check for installed package or for packages
that I have NOT installed yet. I am thus assuming that this package was not
included with Mandrake 10.1 or that I am not searching for the correct
package.
Before I
On Friday 25 February 2005 12:24, Derek Jennings wrote:
On Friday 25 February 2005 15:58, SOTL wrote:
SNIP
I can NOT find kio_fish when I check for installed package or for
packages that I have NOT installed yet. I am thus assuming that this
package was not included with Mandrake 10.1 or
On Thursday 24 February 2005 19:17, SOTL wrote:
Each computer has internet capability and is fully operational in that I
can and do get web sites and e-mail to and from each. Neither computer can
ping the other.
Does computers have public or private IP addresses?
ifconfig from cli and look for
SOTL wrote:
Hi All
As a user not a geek I have worked with and used Linux for some time but until
recently I have not had the opportunity of using my computers on anything but
dial up internet connections. Currently I have that opportunity. I would
purchase a book on networking except that I
On Friday 25 February 2005 00:17, SOTL wrote:
Hi All
As a user not a geek I have worked with and used Linux for some time but
until recently I have not had the opportunity of using my computers on
anything but dial up internet connections. Currently I have that
opportunity. I would purchase
Le June 7, 2004 08:36 pm, Derek Jennings a écrit :
On Tuesday 08 Jun 2004 01:16, Steve wrote:
Okay,
I am not a network person but, I have two home computers running Madrake
10.0 connected to a D-Link wireless router and I want them to be able to
share files on each other. How hard is it
Steve wrote:
Okay,
I am not a network person but, I have two home computers running Madrake
10.0 connected to a D-Link wireless router and I want them to be able
to share files on each other. How hard is it going to be to accomplish
this and where do I start?
Thanks,
Steve
Install webmin on
On Tuesday 08 Jun 2004 01:16, Steve wrote:
Okay,
I am not a network person but, I have two home computers running Madrake
10.0 connected to a D-Link wireless router and I want them to be able to
share files on each other. How hard is it going to be to accomplish this
and where do I start?
Thanks to both Joe and Lanman. Now to tell the poor person I asked the
question for. Lucky him. :^)
On Mon, 17 May 2004 10:22 pm, Lanman wrote:
Trevor Rhodes wrote:
Hello All,
On a dual boot system with Win2000 and LM10 is it possible to access the
LM10 partitions from Win2000? If
I think there are posts regarding this on this lists...u may have to search for it.
However, if you do need help, maybe you can help by supplying the all the relevant ip addresses of your two PCs and also the DNS and Gateway numbers.
- Original Message -From: alex anonymus <[EMAIL
Jason; Try re-doing the network setup in the Mandrake
Control Center and set the network card to DHCP. No need
to setup a DHCP server or anything like that, since the
Dell router is probably providing the DHCP service for you.
You may not even need to put in your DNS or gateway
information as
On Sunday 23 November 2003 16:48, Anguo wrote:
Hello,
I am trying to connect two computers together and share an
internet connection.
I have been reading over and over again the two following
documents:
http://www.mandrakeuser.org/docs/connect/cmlan.html
On Monday 24 Nov 2003 12:31 am, H.J.Bathoorn wrote:
On Sunday 23 November 2003 16:48, Anguo wrote:
Hello,
I am trying to connect two computers together and share
an internet connection.
I have been reading over and over again the two
following documents:
On Sunday 23 November 2003 17:50, Anguo wrote:
Thanks HarM for your reply,
If sol is connected to the internet:
open a terminal as su/root on terra and type:
route add default gw xx.xx.xx.xx (where xx.xx is sol's
IP)
Which IP? 10.0.0.10 or 191.161.1.0?
The former didn't help and
On Sunday 23 November 2003 11:50 am, Anguo wrote:
Does anyone know of a fully functional mail archives for
newbie?
Anguo:
In addition to the mandrake-hosted archives that Harm mentioned, you can find
more archives than anyone should ever need at:
http://marc.theaimsgroup.com
They have this
On Tue, 17 Jun 2003 19:31:23 -0400
Bryan Phinney [EMAIL PROTECTED] uttered:
but mandrake's configuration has bootp, dhcp and zeroconf on the same
line.
where are you seeing this?
Is there anyway to remove the zeroconf while still leaving the
rest of the networking intact? Or anyway to
Run drakxservices and turn off zeroconf.
Miark
On Tue, 17 Jun 2003 22:20:05 -0400
Greg Meyer [EMAIL PROTECTED] wrote:
Bryan Phinney [EMAIL PROTECTED] uttered:
but mandrake's configuration has bootp, dhcp and zeroconf on the same
line.
Is there anyway to remove the zeroconf while
Thanks, I'll give it a try!
"Ronald J. Hall" [EMAIL PROTECTED] wrote:
On Thursday 26 December 2002 10:44 am, you wrote: Hi. I just installed Mandrake 9. Everything seems to be working except The only way to get the dial up connection to work is to first disable the network card. This is a
On Fri, 2002-12-27 at 02:44, Anthony wrote:
Hi. I just installed Mandrake 9. Everything seems to be working
except
The only way to get the dial up connection to work is to first disable
the network card. This is a plain Internet dial up to SBC, using a
Creative 56k ModemBlaster. I
On Thursday 26 December 2002 10:44 am, you wrote:
Hi. I just installed Mandrake 9. Everything seems to be working except
The only way to get the dial up connection to work is to first disable the
network card. This is a plain Internet dial up to SBC, using a Creative 56k
ModemBlaster. I
Another thing to mention about the 192.168.x.x IP addresses is that they
are classed as private (non-routable on the Internet). Thus you can use
them at home for internal netorks.
Depending on the size of your internal network, you can use any of address
ranges below.
Class A private: 10.0.0.0
On Sat, 2002-11-09 at 02:59, John McQuillen wrote:
snip
There is no reason why you can't use an entire class C network at home
for your 2,3 or 4 host network, besides, the private address range in
use here is actually a class B (192.168.0.0/16) and there would be no
problem using that
On Sat, 2002-11-09 at 05:24, Bart Salien wrote:
snip
snip
I agree with John s explanation , however 192.x.x.x to my knowledge is a
class C network with a default mask of 24 = 255.255.255.0
class B ranges from 128.x.x.x/16 till 191.x.x.x/16
class C ranges from 192.x.x.x/24 till
On Sat, 2002-11-09 at 18:12, Erik Farnsworth wrote:
On Fri, 2002-11-08 at 10:45, teddy wl wrote:
1.for connecting all your PC you need ethernet card
for every PC. configuring the IP address ex.
192.168.1.0/24 if you do not understand the IP you
must read the basic of TCP/IP or i sugestion
1.for connecting all your PC you need ethernet card
for every PC. configuring the IP address ex.
192.168.1.0/24 if you do not understand the IP you
must read the basic of TCP/IP or i sugestion to you,
to enter this address for your PC's :
PC 1 : 192.168.1.1 netmask 255.255.255.0
PC 2: 192.168.1.2
On Fri, 2002-11-08 at 10:45, teddy wl wrote:
1.for connecting all your PC you need ethernet card
for every PC. configuring the IP address ex.
192.168.1.0/24 if you do not understand the IP you
must read the basic of TCP/IP or i sugestion to you,
to enter this address for your PC's :
PC 1 :
On Fri, 2002-11-08 at 12:50, L.V.Gandhi wrote:
I have 4 PCs.
3 on dual boot with linux and windows(98 or me)and one win98se.
one has built in 8139 lan card. How should I go for networking these?
1)what is the optimum ways if I have to include a few more PCs. Dual boot ones
can be made only
I will be doing home network with two-machine network pretty soon, but don't
have real experience yet. However, I found this that looked promising:
http://www.tldp.org/HOWTO/mini/Home-Network-mini-HOWTO.html
HTH
-Original Message-
From: [EMAIL PROTECTED]
I'm not familiar with Komba, but I do set up Samba networks. In Komba there's
probably a place to send your username and password. Make sure that is
correct.
In your Samba Configuration, I believe you need to tell it to send encrypted
passwords. If memory serves me correctly GNU/Linux
On Sunday 06 October 2002 11:08 am, you wrote:
I'm not familiar with Komba, but I do set up Samba networks. In Komba
there's probably a place to send your username and password. Make sure
that is correct.
In your Samba Configuration, I believe you need to tell it to send
encrypted
On Tue, 2002-05-21 at 02:10, Anne Wilson wrote:
There is a lot of references on Mandrakeuser and in the archives of this list
about setting up Samba and NFS.
How does one access these archives? Sorry if it's a stupid question,
but there's too much in here to lose.
Anne
See the
On Sun, 2002-05-19 at 07:01, Marcia wrote:
I really do not think I need to do internet sharing afterall since my laptop
linux is using USB cable internet independently of my desktop which is using
the regular cable modem hookup. It seems to be working fine that way however
is their a way I
-- Forwarded Message --
Subject: Re: [newbie] Networking
Date: Sat, 18 May 2002 16:58:57 -0400
From: Marcia [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Thursday 09 May 2002 02:23 am, you wrote:
On Thursday 09 May 2002 8:41 am, Marcia wrote:
Dear All,
I have a desktop
On Saturday 18 May 2002 23:01, you wrote:
-- Forwarded Message --
Subject: Re: [newbie] Networking
Date: Sat, 18 May 2002 16:58:57 -0400
From: Marcia [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Thursday 09 May 2002 02:23 am, you wrote:
On Thursday 09 May 2002 8:41 am
Marcia,
Sorry for the delay - have been setting up a broadband for myself and
newbie has taken a back seat the last couple of days. Sounds like you
are just about set hardware-wise and with 8.2 the software side should
be a breeze.
I think all you need to add is a cross-over network cable.
What bug? Theres nothing wrong with KDE networking.
That 'Localhost not found' was because you clicked on
Networklocal Network in konqueror which is used for browsing Samba networks.
If you have not set up Samba and an application called LISa thats what will
happen.
There are 2 ways to share
localhost not found is (my first guess would be) a problem with the names of
the computers in the /etc/hosts file or /etc/hosts.allow or /etc/hosts.deny.
does each computer have it's own name and IP properly wrote to these files
and set in the network setup scripts?
On Thursday 16 May 2002
Got the advice that I have to set up Samba and Lisa. Will first have
to read documentation about this
thanks anyway
localhost not found is (my first guess would be) a problem with the
names of
the computers in the /etc/hosts file or /etc/hosts.allow or
/etc/hosts.deny.
does each computer have
Marcia,
Try using the -bgr233 option. That will force the server
to send 8-bit color instead of 16-bit color.
You can also mess with the -compresslevel num option,
where num is 0-9. The -quality num may also help
the speed (at the expense of quality, of course).
See the man page for (sketchy)
Dear Brian,
On Sunday 12 May 2002 07:48 pm, you wrote:
Marcia,
I have seen some replies to this, but don't think any of them have yet
touched on a crucial point: Your laptop is running W98, so would
therefore be much more safely disposed sitting behind your linux box in
internet terms.
I
Marcia,
I have seen some replies to this, but don't think any of them have yet
touched on a crucial point: Your laptop is running W98, so would
therefore be much more safely disposed sitting behind your linux box in
internet terms.
Does the laptop have an ethernet port, or can it be added? If
MandrakeUser does not recommend USB network connections, and talks you through what is
recommended. See the gory details at:
http://www.mandrakeuser.org/docs/connect/cmlan.html
MandrakeUser is a great site, by the way. If you haven't browsed the docs there yet
it's worth checking out.
--
/etc/hosts:
192.168.0.3 luc.thuis.com luc
192.168.0.1 luc.thuis.com ivette
why do I have to give a domain name? I'm only trying to set up a
small intranet, nothing else. Do I need to give a Gateway number or
DNS number?
I have three computers, two working with windows 98 SE and
what does your file /etc/hosts say?
On Tuesday 23 April 2002 03:11 am, you wrote:
how to configure NIC? Gave it a fixed IP-address (192.168.0.3) and
hostname luc (name of the computer in the network) but keep getting
error message hostname 'localhost' can't be found. The other
computers
On Friday 12 April 2002 14:03, Belgarius opened a general hailing frequency
and transmitted to all open stations:
My intention is to use the Linux system as my primary server, and move
the user files and so forth to it, as well as make use of it's FTP, mail,
and http servers to host my
On Friday 12 April 2002 10:03 pm, Belgarius wrote:
(Actually, that subject line should be *utter* newbie)
I've taken the plunge here, and installed ML 8.2 on another machine, one
that I hope to eventually use to replace my present Windoze server system,
but have already hit a stumbling
Elizabeth Jones wrote:
Hi - I just installed mandrake 7.1 on a new box. I am trying to
duplicate a box that died last week and reusing the same server
name and IP address. But I clearly have something set wrong. I
can see this new box from the network and I can telnet and ftp
in to it,
On Mon, 04 Feb 2002, Gerald Waugh wrote:
On Mon, 04 Feb 2002, Elizabeth Jones wrote:
%_Hi - I just installed mandrake 7.1 on a new box. I am trying to
duplicate a box that died last week and reusing the same server
name and IP address. But I clearly have something set wrong. I
can see
This worked, I changed the broadcast address as Gerald said and
now it is working. Thanks alot!
On Mon, 04 Feb 2002, Gerald Waugh wrote:
On Mon, 04 Feb 2002, Elizabeth Jones wrote:
%_Hi - I just installed mandrake 7.1 on a new box. I am trying to
duplicate a box that died last week
Elizabeth Jones wrote:
Hi - I just installed mandrake 7.1 on a new box. I am trying to
duplicate a box that died last week and reusing the same server
name and IP address. But I clearly have something set wrong. I
can see this new box from the network and I can telnet and ftp
in to it,
disable routing. you have the default route set to eth0 and not PPP0
On Saturday 02 February 2002 06:02, you wrote:
Hi all,
I have one of those usb alcatel modems, which works perfectly.
my problem is that when i have eth0 enabled as well, i loose dns
resoloution, i can ping the outside
On Saturday 02 February 2002 06:02, you wrote:
Hi all,
I have one of those usb alcatel modems, which works perfectly.
my problem is that when i have eth0 enabled as well, i loose dns
resoloution, i can ping the outside world and retreve web pages if i
know
the ip address of the
Never used XP, but is this was a win98 question I'd say the problem was that
you were not logged into the windows box with a valid username/password.
For some reason if you give windows the wrong password it does not stop you
logging on and seeing all the files, but it will stop you browsing
Nope... It's off... Gawd I have no idea what's happening with it :(
-Original Message-
From: Dave Sherman [mailto:[EMAIL PROTECTED]]
Sent: 11 December 2001 22:01
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Networking Problem
On Tue, 2001-12-11 at 13:03, Neil R Porter wrote
Try www.linuxnewbie.org , and look at the NHF (Newbie Help Files) for
networking.
Lanman
On Tuesday 11 September 2001 04:54 am, you wrote:
Hi,
I want to network my linux box with my two other machines (win2k and
win98), I want the linux box to act as a server on the network as it will
Lee
Start off by teading the HOWTo's on Mandrake User Online
http://www.mandrakeuser.org/docs/connect/
Also check out the archive of this email list
http://www.mail-archive.com/newbie@linux-mandrake.com/
Samba will get your Windows machines networked to the Linux machine. The
Windows
Ideally should should have initially inserted the card BEFORE installing
Mandrake, so that it would have set everything up for you.
If you already have it in place, you'll need to at least once insert the
card BEFORE the machine boots so that HardDrake can configure it.
lsdev should then show
On Sat, 2001-09-08 at 14:05, Robert F. Trettel wrote:
That said now the laptop has a problem the linksys EtherFast 10/100 is
not reginized hear a long and short beep when inserting.
Did some checking at Linksys web site,they say to get it to work have to
do
some compiling. heck I can just
Well the thing in Linux, is that if there are problems with an IRQ
conflict, your hardware is not going to work. I ran into problems like
this with one of my machines.
In Windows, if there are IRQ conflicts, it will still manage to find the
address for the hardware and send the correct
do u have any sort of firewall installed? u might have port 21 disabled in
some manner
- Original Message -
From: Arthur H. Johnson II [EMAIL PROTECTED]
To: Newbie Linux-Mandrake [EMAIL PROTECTED]
Sent: Tuesday, September 04, 2001 7:27 PM
Subject: Re: [newbie] Networking FTP
You need
Hi there.. My cable modem set-up see's this change between OS's as a
different pc and therefore requires a reboot before it will work with
Linux
Hope that helps...
Paul
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tameem Ali
Sent: 23 August
Try going here.. Mandrake has that file,,
http://www.rpmfind.net/linux/rpm2html/search.php?query=rpc.nfsdsubmit=Searc
h+...
did you install nfs-utils ???
regards
Frank
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Michael Lewis
Sent: Sunday, 10
I installed every option on 7.1 and 7.2 That file does not exist on either
machine. Could it be called something else?
Thanks
On Sun, 10 Jun 2001, you wrote:
Try going here.. Mandrake has that file,,
http://www.rpmfind.net/linux/rpm2html/search.php?query=rpc.nfsdsubmit=Sear
c h+...
did
to be running in. For example, on my backup
server I have them in the rc3.d directory.
- Original Message -
From: Michael Lewis [EMAIL PROTECTED]
To: Franki [EMAIL PROTECTED]
Cc: Linux Newbie [EMAIL PROTECTED]
Sent: Sunday, June 10, 2001 9:29 AM
Subject: Re: [newbie] Networking problem
On Tue, Jun 05, 2001 at 02:58:43AM -0600, Paul Remnant wrote:
Hi,
I Installed Madrake 7.1 last night and want to network it to my other Windows 98
Machine. I dont think that it has detected my network card because it is not listed
under hardware configuration. The card is a 3COM 3c509x
Here's the tutorial/howto I followed to get mine up. It's pretty good if
your provider uses pppoe and you use ipchains (which you probably will if you
are indeed going back to 7.2).
http://www.mandrakeuser.org/docs/connect/cpppoe.html
-s
On Friday 11 May 2001 08:04 am, you wrote:
We are
Yes, use eth1 for the second card.
One card should be hooked up to the DSL. The other
card should be hooked up to the internal private
network. This server with the two cards can act as
the router and the firewall.
Give eth1 similar information as eth0. It's probably
easiest to get them both
You are at the start of the samba adventure. Your distro came with samba
almost certainly. Install it and read through the docs. My distro also
included the manual as printed by O'Reilly.
Daryl Johnson
Proplan Associates
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
You need to run Samba on the linux box.
Daryl Johnson
Proplan Associates
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of BJS
Sent: 05 April 2001 02:32
To: [EMAIL PROTECTED]
Subject: [newbie] networking question
Ok
Box #1 runs windows 2000
first step...turn off Plug and pray in bios...
- Original Message -
From: "Christopher" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 05, 2001 2:07 AM
Subject: Re: [newbie] networking question
How did you get Linux to see your network card? I've Mandrake
Ed Tharp wrote:
first step...turn off Plug and pray in bios...
- Original Message -
From: "Christopher" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 05, 2001 2:07 AM
Subject: Re: [newbie] networking question
How did you get Linux to see your ne
How did you get Linux to see your network card? I've Mandrake 7.2 Deluxe,
and have yet to get it to see my LinkSys 10/100 card. I'm lost. Any help
there?
Thanks,
Christopher.
- Original Message -
From: "BJS" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 04, 2001
I'm with similar questions. Looking forward to hearing responses to this.
What hardware is necessary if 2 or 3 machines will be networked in a LAN,
connection sharing, etc.)? What working/cost differences are there between
hubs, routers and switches or are 2 or more of these synonymous?
Dave
I use the linksys cable/DSL router. It is fine for a
home LAN. It is fast and works well. With the
Linksys models the prices between hubs, switches, and
routers go up about $15 per level (depending on the
number of ports, obviously). Their multi-port
router's include a built in switch.
The
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Todd Flinders
Sent: Friday, January 26, 2001 12:20 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Networking question...
"The switch is far better than a hub. I see no reason
to purchase a hub. Th
Yes, logically a switch works just like a hub.
Plug your machines into the switch and you are done.
Switches have many advantages... I.E. support for full duplex operations,
etc.
-JMS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Matt Schroeder
today when I start the system under linux I no longer get
the dongle or hub lights like I get under Windows98.
Suggestions
Thanks...Jim
- Original Message -
From: mineispooter
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, October 22, 2000 5:30 PM
Su
Jim,
I noticed you have a Cisco 675 on dsl. I am using
Verizon for dsl access (bronze package) I just recently bought a Cisco 675. I'm
have some of the same issues with Redhat and my laptop (a generic from
maxstation) wich has a 3com 3c574tx PCMCIA nic. Redhat 6.2 will init the card
hts like I get under Windows98.
Suggestions
Thanks...Jim
- Original Message -
From:
mineispooter
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Sunday, October 22, 2000 5:30
PM
Subject: Re: [newbie] Networking setup
for PCMCIA on laptop
Jim,
1 - 100 of 172 matches
Mail list logo