Here's a fun thought to do with people like this:
With an unmetered phone lines you can call all you want and you never get
charged (since I don't have any modems, I have a metered line as I rarely
use the phone). A little war-dialer program would be useful for just such
spam and have it run
I like 3CDaemon. 3Com's support site has it under Windows Apps. I keep a
copy on my ftp server as well for easy access at customer sites (I hate it
when silly support sites change or move files):
ftp://artoo.net/pub/bin/windows/32bit/3CDaemon206.zip
--
Jason Roysdon, CCNP+Security/CCDP, MCSE,
What IOS were they running? Did they prompt you for configuration on boot,
or already seem to have a config? If so, use 'enable' and then 'erase
startup-config' and see if it's not enabled by default. I have never had to
enable it on a router fresh out of the box in my short two years with
Very cool. I'd dinked with it a few times and never got it to work, and
this solved it for me. Now it prompted for the browser to use, and I select
IE and it just works. I don't know why Cisco can't just store the whole
thing in pure HTML so folks can browse it with whatever OS/browser you
I think everyone should forward the original email to their Cisco CAMs and
request. If we make enough noise, perhaps we'll get some cool plaques.
I'd say it's warranted at the CCxP level (although, give things for CCxA on
the plaque as well), and perhaps even once you get any single CCNA-level
So add a week and looks for it the third week of May ;-)
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Alex Lee wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I was told yesterday by TAC that it
But I would compare the CNE to the CCNP/DP, and put the ECNE/MCNE at about
half-way between that level and the CCIE. Apples to oranges.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Ronnie Poon wrote in message
Has anyone heard any recent stats on pass/fail rate for the CCIE? I believe
I've heard a few times that it was 80% fail rate the first time through.
Not that a Jedi, err, Network Engineer should think about such thinks or be
fearful, but still, I'm curious.
Speaking of, this is one of the
Bookmark it. I use it 2-3 times a month (clueless customers).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
sparkest pig wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
anyone know the link for
I can't see the certification being devalued. Cisco is constantly making
the test harder by adding more and more relevant items and removing those
that are not. Plus, by forcing older CCIE's to keep current with the CCIE
Written is decertifying those that don't care and keeping the numbers from
Buy a 6400 ;-p
http://www.cisco.com/warp/public/cc/pd/as/6400/
Cheaper to order ADSL if you can get it. However, it's pretty much
pointless for real ATM practice (just read a sample config for an 827), as
you can't change the ISP side of things.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE,
Of course, those that have gone to college value it more, but I say forget
college and don't waste 4+ years of your life if you know what you want to
do and don't need it.
I've seen a number of pay-scale tables, and here's an example of what I've
seen a number of places: 2 years of experience is
I won't argue that it's always wise to follow what other people did, but I
will make a few points.
First is that unless you know at least a very good entry-level knowledge of
networking beyond the Cisco product line, you're not very useful. A CCIE
who has never touched NT or Unix, bah, I don't
Congrats!
Comments inline
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
ryan wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Can anyone tell me what is chapter(s) in cisco press book belonged to
syslog out to whatever (3Com's 3CDaemon is my fav Win32 app), and use
WebTrends to make pretty stats for you. I believe they have a specific
version for firewalls/internet access stats.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage:
You have your stamped Prometric test results, I hope? Please keep us
informed. I've taken all my tests at Prometric and never had problems.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
sdonoho wrote in message
It's not going to work with port redirection doesn't work with anything
other than tcp and udp. You need rdp (protocol 27, not a port, but the
protocol), as well as tcp 3389 and tcp 1503.
Try it with this instead and you'll see that it should work (provided no
ACLs or firewall is blocking it):
Study up and I'm sure you'll have it the next time.
Regarding the age thing, experience (not just knowledge) is often a factor.
Plus, what says you're not going to leave them as soon as you're able to
work full time? More than likely this other employee isn't going to leave
as fast.
Don't
I can tie this slightly on topic, but it's really not (but no doubt someone
here will know). I've got a box that was hacked yesterday (not a box I
admin or even have passwords to, but one on my network). Someone is using
it for a drop box for ftp. For now, I've just killed everything with
Heh, well, I found out a simple way to do this tonight (I'd never needed to
use it before, always having Sniffer Pro on my laptop available). One way
might be to put a sniffer either inside or outside your firewall to watch
all data (and possibly filter on http if that's all you want).
tcpdump
Very cool, worked like a charm.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Mike Taylor wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
the evidence without knowing it. Anyone have a Win32 app
Interesting. If you have time, can you test again with 'no service config'
set ? I'm curious if it was originally set by service config or something.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Kevin Wigle
Terminal Server:
remote desktop protocol (rdp) protocol 27
tcp 3389
tcp 1503
Citrix (doesn't require T/S stuff to be opened):
tcp 1494 (in)
udp 1604 (in/out)
tcp/udp 1023-65535 (out)
Both info was found from each vendor's knowledge base (T/S in TechNet or ,
Citrix on Citrix.com), but I keep a
No cheap way around it, it will require an ISDN Simulator (hardware device
that simulates 2+ ISDN lines, depending on model). ~US$1-2K depending on
what features you want. Cisco ISDN CIM's (software programs simulating
routers and ISDN configurations) run a lot less (US$150)and may be more
I'm not exactly sure what you're looking for, but I'd suggest grabbing
3Com's Subnet calculator, which will let you select by network bits, subnet
mask, subnet networks, or hosts. Somewhere on their support site under
Windows applications (free). I keep a copy on my server as well if you
like:
No, that expired Dec. 31st, 2000. I took mine while on Christmas vacation
for that very reason. Now you only need a CCNA + the 4 security tests for
the Security Specialist 1 cert.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage:
Easily. It all depends how and where you look, but I'm seeing 103K right
now:
telnet://route-views.oregon-ix.net
sh ip bgp sum
And the highest is looking like:
198.32.162.18 4 4513 6942069052 443975300 6d07h 103539
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA,
Ditto. Get a written policy established first, and unless you're dealing
with schoolage kids, a few rumors spread about the internet access being
logged should deter most (and syslogging isn't that hard). The rest, well
their managers can deal with when presented with the logs.
--
Jason
First off, congrats. That test stumps a lot of experienced folks (just poor
test takers).
Best recommendation I tell folks is to read through each scenario completely
and take brief notes (get 4 of the blue note cards the testing center will
offer you), and the time you spend reading through
Recall that it's AKA CBAC (Context-Based Access Control)
http://www.cisco.com/warp/public/707/index.shtml#IOS
There are a ton of examples. Basically, you ACL the outside interface to
block everything (or open a few holes for whatever public services you
host), and then you apply the firewall
Try eBay. You're actually looking for the PCMCIA flash card, and make sure
you know which model you need it for and that the card goes to, as the 1600
and 1600-R line take different versions (on the back of the router, does it
say 1601 or 1601-R?).
I see a number of routers with flash, but no
It'd be better to change the subject and/or start a new post with the
appropriate subject (as I just did).
Anyway, the Foundation is basically the same as the 3 individual tests, but
less questions total, and all drawn from the same 3 full tests. I took the
individual tests, just search the
Everyone with common questions that we all know comes up on the list should
consider using the Archive search rather before posting (I use it a lot to
find common things asked/answered here). The first hit with "COLT" contains
the URL.
http://groupstudy.com/cgi-bin/wilma/cisco
--
Jason
Get the most minimal IOS version that supports the features you need (just
sounds like you need IPSEC, but the Firewall feature set would be
recommended if you don't have something else, and it's going to add more
DRAM/Flash requirements as well). Each additional feature set is going to
add more
You may have to do some research to find what IOS first supports routers a
dhcp clients if this command doesn't just work, but here it is:
int e0
ip address dhcp
You may also want to change the MAC address on your interface if your cable
company has tied your access to the NIC you used during
Cheers!
George Murphy, CCNP
- Original Message -
From: Jason J. Roysdon
To:
Sent: Saturday, April 21, 2001 2:27 AM
Subject: OT: Router rack pictures [7:1470]
I almost forgot to post this (actually, I did forget to post them last
night, and almost forgot again tonight).
Unless you forgot to paste it, you have failed to apply inside2comany to the
comanynet interface as incoming. I also suggest having two different ACLs,
one I usually call "NoNAT" and one named for the actual interfaces I mean
for it to apply to (in your case, inside2comany).
Here's what you
Unless you forgot to paste it, you have failed to apply inside2comany to the
comanynet interface as incoming. I also suggest having two different ACLs,
one I usually call "NoNAT" and one named for the actual interfaces I mean
for it to apply to (in your case, inside2comany).
Here's what you
Amen, Daniel. I can't see blowing it all on one (or even two) routers when
you can make a really nice lab with that amount of money. I guess it all
comes down to what your needs are. If it's to have cool equipment you want
to use and be able to upgrade with different parts, the module routers
Streamlining to keep the code small? This appears to be true on my 827
running IP PLUS FW IPSEC. It does support EIGRP, so stop whinnin' and go to
something that supports classlessness. The interesting thing is that it's
still in the help system:
falcon-827-4v(config)#router igrp ?
Look into CAR as well.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Charles Nunie"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Can Cisco 2600 and 3600 be configured to provide Quality
CCNA expiration is automatically renewed when you get your CCNP or CCDP. So
long as you keep your CCNP or CCDP current, you'll always be a CCNA (CCNA
and CCDA for CCPD).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Linked from that site was "CCNA for Dummies"
http://www.amazon.com/exec/obidos/ASIN/0764506900/ref%3Dase%5Froutergod/107-
0761137-0763711
Gawd, like we needed that. I know enough CCNA dummies without this book ;-p
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL
ll.
-----Original Message-
From: Jason J. Roysdon [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 19, 2001 10:06 PM
To: [EMAIL PROTECTED]
Subject: Re: What ISP do you recommend for BGP?? [7:1295]
It's all going to depend on the luck of the draw as to the engineer you
get,
I think,
I would complain to the cert tracking folks. I'm in the same boat, having
done my CCNA v1 last year before the v2 came out, but yet my CCNA is not set
to expire 3 years after I got it, but 3 years after I got my CCDP with my
CID. One thing I am glad to see is that it now shows I have my CCDPv2
Sorry to hear, sounds like my first pass (and I was so pissed I took the
rest of the day off and studied, retook the test that afternoon in the last
slot and passed by 150 points). Of course, I blame the ACRC book I used to
study with has just a few pages on BGP (my fault for not comparing the
My understanding is that you can upgrade to any minor release without cost.
So if you had 11.1(1), you could upgrade to 11.1(8). To go to a new major
release, like 11.2(1), you'd have to purchase it (or have a SmartNet
contract).
So long as a product isn't listed as DF (deferred), I wouldn't
I'm no librarian and don't know much about how ISBN's work, but you'd think
a Second Edition should have a different ISBN? I guess technically it just
fixes errata, but still.
Be sure to get the Second Edition version of this book (c) 2000, instead of
the original (c) 1997 book. Same ISBN as
Zebra for linux works great. I even have a copy running for public access:
telnet://artoo.net:2605 (password is bgp)
http://freshmeat.net/projects/zebra/
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""sdonoho""
I actually found "Cisco IOS Bridging and IBM Network Solutions" in our
company library today (collecting a ton of dust, I might add). (c) 1998,
but I'm sure the IBM Network Solutions will work for me in addition to what
I've found online so far. If I need more help, I'll check out your
MRTG, and it's free. I routinely set it up for customers (of course my
labor isn't free). Here's a link to my site where I have it running. At
the bottom of the page is a link back to the MRTG site where you can
download it.
http://artoo.net/mrtg/63.107.123.253.2.html
--
Jason Roysdon,
Aren't the xV models just the same thing but with the extra dram/flash and
correct IOS image bundled (and also cheaper than buying them individually)?
I think that's my recollection on them.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage:
Yes, routers are capable of QoS into a VPN. The Concentrator or PIX are
not, as they don't support QoS (although if you have a router supporting QoS
before, you might be able to fudge it a little). Of course, you can only
control QoS into the VPN, and not how the tunnel itself will perform once
HR is clueless. List all certs, including pre-reqs that we all know a
higher cert holds. I list CCNA and CCDA in addition to the CCNP and CCDP in
my certs section (but I also break down when I obtained them by date).
Also, don't just list "CCNP" but include what it stands for and order the
I haven't applied CAR yet, but one other point to make is that you need to
have your upstream ISP applying CAR as well, otherwise this is basically
useless (you need them to block/slow down this sort of traffic before it
hits your WAN link).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA,
he QoS issues you have to
deal with in using the Internet as opposed to a FR or PPP connection...
like
I said, it would be strictly for experimental/play purposes.
- Mark Odette II
- Original Message -
From: "Jason J. Roysdon"
To:
Sent: Thursday, April 19, 2001 2:48 AM
Su
Email the CCO team and they'll fix your access if you're supposed to have
it. I've run into this from time to time. [EMAIL PROTECTED] is the email
address to use. Tell them your login ID and they should be able to take it
from there.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+,
Just because security is something I enjoy, it's most likely the next thing
I'd pursue after R/S (plus it should be a piece of cake after the CCIE R/S,
just learning the security depth and already feeling secure in the R/S
side).
A good starting point in the meantime would be the 4 security
And it's all tied to time as well, so just don't go down/up within a very
short period (just go down, do your work, then back up). If you know you're
going to take a BGP announcing router offline and don't want there to be any
possibility of things bouncing while you're working, shutdown your
But as he's posting to a Cisco list, he's probably curious about getting it
to work with a Cisco router ;-p
Cisco TAC's DSL section has a number of PPPoE sample configs:
http://www.cisco.com/warp/public/794/
The hardest thing will be getting your PVC info from your clueless ISP
helpdesk:
d to spell out
to
them what you have.
Karl
- Original Message -----
From: "Jason J. Roysdon"
To:
Sent: Thursday, April 19, 2001 6:44 PM
Subject: Re: Job Fair Cert's [7:1228]
HR is clueless. List all certs, including pre-reqs that we all know a
higher cert holds. I list
It's all going to depend on the luck of the draw as to the engineer you get,
I think, at least to some degree (same is true of Cisco TAC, and they're the
top as far as support goes, IMHO). Mind you I've only turned up two BGP
connections, but Sprint was totally on the ball and great to work
Speaking of, I'll be posting pics of my compost bin, router rack, and
firepit on my homepage tonight. These are my hobbies, I'm a homebody geek,
and I like my life as it is, thankyouverymuch *g*
One of these days I'll get a digital camera so it doesn't take me 4 steps to
get photos up my
interface Ethernet0
description Customer LAN
ip address 192.168.1.1 255.255.255.0
no ip directed-broadcast
ip nat inside
!
interface BRI0
description Customer, Inc. 209-599- (SPID1 2095990101) (SPID2
2095990101)
ip address negotiated
no ip directed-broadcast
ip nat outside
trying to work out way some issues as
to
why routers don't route IP. So I think (d) would be approriate.
Why would a router "learn about a static route". So (c) goes out the
window.
Maybe I have a twisted view?
Teunis,
Hobart, Tasmania
Australia
On Saturday,
"show flash" or "dir" will report that you probably don't have enough space.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Kim Seng"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am trying
Mirrored and re-zipped by me at
ftp://artoo.net/pub/doc/cisco/ios/
You can get the individually zipped directories (for those with slower
connections), or the ciscoios-combined.zip file which contains all of them,
but don't waste your time downloading both.
Note: I only allow a certain amount
I received this from a fellow engineer who contacted TAC:
From: Mangieri,Joe
Sent: Tuesday, April 17, 2001 10:46 AM
To: 'Jason Roysdon'
Subject: RE: Microsoft Windows XP, and CISCO's 5000 Series Switches
On a Supervisor Engine III, the show module command provides information
about the EARL and
*snort* You only do that when you typo an ip address you want to telnet to
and it just sits there waiting to time out ;-p
Otherwise, use CTRL+^ followed by x (CTRL, SHIFT, 6 release keys and x).
If you're telnetting into a router and then into another, you can stack the
CTRL+^ twice and then x
Click on the size of the organization, and once the next screen loads you'll
have a "Success Stories" button on the bottom left.
You'll never find a lack of Cisco sales-fluff on CCO ;-)
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage:
True, but even if you sat down at a PC and got its MAC address (or just used
that same PC), you'd still have to have the username/password for any real
access, as even their Bordermanager proxy is based on being authenticated to
NDS. But good point if that's all a person was using to verify a
Should be easy enough to troubleshoot with a sniffer. Search the archives
here and you'll find a number of references to free/trial versions.
The solution is to segment with switches if it's not a misbehaving device
(and even still, switches are so cheap these days). How many nodes and how
I would recommend "Internet Routing Architectures," by Sam Halabi to anyone
planning to delve into BGP.
Quoting from the BGP Bible itself, Page 104, "Instead, the provider can give
the customer an AS number from the private pool of ASs (64512-65535)... as
described in RFC 2270." RFC 2270
interface on which you have configured the IP Helper
address command. So make pools on the DHCP server
accordingly. eg: Router's interface 192.168.1.1/16
Server' pool 192.168.0.1-192.168.255.254 wil work.
Muhammad Khalilullah
CCNP, MCSE
--- "Jason J. Roysdon" wrote:
Yup, you
To my knowledge, one place alone assigns them, and that's the ARIN. US$500
up front and US$30/year afterwards, plus you have to show justification
(mutlihoming with two ISPs will do):
http://arin.net/regserv.html
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL
You can go to Cisco's site and use their "Find a partner/reseller" link if
you like:
http://www.cisco.com/public/crs/locator/
As you already have the part number, it should be a piece of cake for them
to order it for you. If you'd like, I can direct you to my company's
ordering number, but you
I'm pretty sure it is not possible. I've even heard that once you go from
4.x to 5.x you cannot go back (even if you have the older software on disk
or whatever). Something about changes to the way it handles the flash.
I've downgraded from different 5.x versions with no problem, but we just
The PIX doesn't support NTP (either to poll from or server). You'll want to
have your external router polling a few outside sources, and have it provide
clock for the inside. NTP uses udp/123, so if you right a tight firewall
that's what you have to open up to that outside router. Also, lower
Cat6Ks, Cisco's current flagship switch, of course ;-)
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Thank you very much, appreciate all the help. I
Good advice and a great way to sell SmartNet contracts and maintenance
contracts to keep those switch's CatIOS updated.
Also, I hear that Win2K can cause the same problem, but comes with spanning
tree disabled by default (which is the real problem, I believe).
--
Jason Roysdon,
Oh, and also the public NTP server list is handy. Use stratum 2 servers
since the Cisco box isn't ever going to be accurate enough to need stratum
1.
http://www.eecis.udel.edu/~mills/ntp/servers.htm
Also, never copy the 'ntp clock-period ' command. That is set
automatically by the
Give us a 'show ip route' from reach router. We'll be comparing the
weights/metrics, so you can get a jump on it if you like.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""SH Wesson"" wrote in message
[EMAIL
I hear this and other TR questions oddly still comprise a large section of
the test, so be prepared.
It's what I spent this weekend starting to learn about. Bleh, I hate
old/dead technology that no one I know uses. I'm just glad it's off the
lab.
I think it's time to purchase or find a good
Testing to see if URLs in the subject get truncated. The subject should
read:
Test post with CCO URL - http://www.cisco.com
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Message Posted at:
't route IP. So I think (d) would be approriate.
Why would a router "learn about a static route". So (c) goes out the
window.
Maybe I have a twisted view?
Teunis,
Hobart, Tasmania
Australia
On Saturday, April 14, 2001 at 03:00:21 PM, Jason J. Roysdon wrote:
If 3 must be tr
The average sampling can be changed on a per-interface basis with the load
command. I usually change ports I'm testing to 'load 30' so I can easily
see after 30 seconds of generated traffic how a link is performing. 10
minute sampling would just be 'load 600.'
One of our the groups gurus can
It depends on the interfaces you'll have on the 1700 and 2500. The base
1700 has only a fastethernet port which can connect via a crossover cable
(or hub/switch) to the ethernet port of the 2500 via an AUI-to-10baseT
transceiver (if it's a 2500 with an ethernet port and not token ring). You
can
ipaddress port' from the command line/run (telnet ipaddress:port from the
command line fails to work properly and just reports that it cannot
connect). I suggest getting TeraTerm for a much better telnet/serial
program. You can change the telnet:// URL to launch it instead of the
Windows
Yes, but remember that just changing the port is very weak security that any
portscanner will be able to find:
Start - Settings - Control Panel - Administrative Tools - Telnet Server
Administrator:
Microsoft (R) Windows 2000 (TM) (Build 2195)
Telnet Server Admin (Build 5.00.99201.1)
Select one
arded helper-address packets? Then match up the correct scope with
the
router interface ip address?
""Jason J. Roysdon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Here's a fun link explaining ip helper:
http://routergod.com/trinity/
--
That's got to be one of the lamest things I've ever heard. I'd tell
accounting to stick it, and that unless they want to learn how to make
routers work and figure out the correct parts, that perfectly legitimate
third-party serial cables are no different than the Cisco blue logo'd
cables other
Use MAPS RBL and/or ORBS. You'll probably end up blocking some legitimate
stuff than spam, however (read their disclaimers and how each works).
http://www.orbs.org/
http://www.mail-abuse.org/
I like SpamCop for reporting spammers that actually get through to my work
and/or personal email.
You mean books. Why not start with the CCIE RS Qualification Exam
(Written) Recommended Reading List?
http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#34
The Blueprint would also make for a good starting place for your book
purchasing/online studying:
If 3 must be true, I'd say start with getting rid of the ones that aren't:
Routing is enabled by default (may not have always been true, but as of
12.x)
The command to enable routing is 'ip routing'
That leaves you with three left. Of course, the exam could be wrong. a,c,e
sound correct
I can't any reason why it wouldn't work. The only thing I would mention is
that older IOS using EIGRP doesn't allow you to specify a mask with the
network command, and wouldn't allow you to be granular with your networks if
you don't want to specify all of them to be known in EIGRP. If you want
Check some online job posting places and just see what's going for what
salary.
http://www.dice.com/
Location and its market demand is going to influence things heavily as well,
so you should also consult a salary/cost-of-living calculator if it looks
like you might be moving.
L PROTECTED]...
what is CIR?
"Jason J. Roysdon" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
However, one thing to consider is that CIR at any given point doesn't
mean
that you have that end-to-end CIR. Of course, without at least having
the
port speed at your
I don't know that they do, but the Linksys does support port redirection.
Just point the standard telnet port (23) at your inside router. Once on one
inside router you can telnet around to others inside, or you can also point
other ports from the outside to inside port 23. The biggest
Congrats!
Most people don't realize that Routing is much harder than they think it's
going to be. It's a test on routing protocols, not routed protocols. Just
be sure you've read up on the exam outline (maybe pull down the outline from
the previous version of the test, as it breaks down
However, one thing to consider is that CIR at any given point doesn't mean
that you have that end-to-end CIR. Of course, without at least having the
port speed at your given CIR, you'll never go faster, but having the local
FR switch's CIR from 'show frame map' is useful.
Consider this:
1 - 100 of 240 matches
Mail list logo
