Re: Forecasting beginning in the future

Also, "balance" gives a different answer than "register" in that example.On Mar 22, 2024, at 3:29 PM, Bob Wilson wrote:I'm having the same issue.Example file:~ Monthly from 2024/02/15    Expenses:Rent      $500.00    AssetsCommand:$ ledger -f test.dat --forecast

Re: Forecasting beginning in the future

I'm having the same issue. Example file: ~ Monthly from 2024/02/15 Expenses:Rent $500.00 Assets Command: $ ledger -f test.dat --forecast "d<[2025]" register Expenses:Rent 24-Apr-01 Forecast transaction Expenses:Rent $500.00 $500.00

Total posting costs and precision issues?

suggestions? Thanks folks! Bob Wilson -- --- You received this message because you are subscribed to the Google Groups "Ledger" group. To unsubscribe from this group and stop receiving emails from it, send an email to ledger-cli+unsubscr...@googlegroups.com. To view this discussion on the

Re: Printing to stdout

John Wiegley wrote: > >>>>> "BW" == Bob Wilson writes: > > BW> Previously, running a command like `ledger -f ledger.dat balance ^ > Assets` > BW> would print results directly to the screen and return me to the prompt, > BW> but now that s

Printing to stdout

screen that disappears when I hit `q`. It's like the difference between `cat` and `less`. Sorry I don't know the right terminology! As a workaround, I can pipe the command into cat, and then it prints to the screen. Is there a way to just print to the screen by default? Thanks! Bob Wilson

[Elecraft] N6TV Product Announcement - new "K-ON" plugin for K3, K3S, and K4

Thanks to circuit design help from K9JB, and after review by Elecraft Chief Engineer, N6KR, I'm now able to provide a new plugin module for the Elecraft K3 and K4 that I call the "K-ON". When connected to the rig's ACC jack directly, or via a 15-pin Y-cable or Y-BOX , the

Re: Compound interest and amortization

Hi Viraj, (I recently joined the Google group and discovered your post. Hope my comment is still useful!) I have a hacky way of doing this with automatic transactions. Weird context: I use "4x entry accounting". A typical transaction involves two virtual entries and two real entries, like:

Re: [Elecraft] Y-Box connections KPA500/K3

Sorry Josep, the Y-BOX is designed to connect the ACC connector of one K3 or K4 to multiple devices, such as one amplifier and one automatic antenna switch or bandpass filter box; it cannot be used to connect two K3s in parallel to one amplifier. It *might* work if one K3 is completely powered

Re: [Elecraft] FS - N6TV Y-Box

I don't remember what Ed had connected to his Y-BOX. Maybe just an Elecraft amplifier and an FSK keyer like a Mortty or WinKey V3. Unlike the K3, the K4 provides two (2) independent virtual serial ports via the USB cable, plus a third independent legacy RS232 port, all of which now support FSK

Re: [Elecraft] Relocating my KPA-1500 - need cable

On Thu, Jun 2, 2022, 11:24 PM wrote: > *Just so I’m clear on the concept, you’re suggesting taking my existing > AUX cable from the Y-box to the amp on the desk, and adding a DB-15 > straight-through extension to it, and connecting the far end of that > extension into the relocated KPA-1500 in

Re: [Elecraft] Relocating my KPA-1500 - need cable

On Thu, Jun 2, 2022 at 6:28 PM wrote: > Not sure what you mean by “set drive power” this is something I generally > do manually, but would love the ability to do it automatically based on > band segment. > The K3 will automatically memorize and recall the required drive level set on each band,

Re: [Elecraft] Relocating my KPA-1500 - need cable

I would try the 25' to 30' AUX cable. It will probably work fine. AUXBUS is only used for automatically setting drive power ("KPA1500 OPER" messages) and recognizing band buttons being pressed on the amp, which you will not be doing, plus rig frequency setting the KPA1500 tuner to the right

Re: [Elecraft] Relocating my KPA-1500 - need cable

Peter, My records show that you purchased the original Y-BOX v1.3, which requires an Elecraft AUX cable from Y-BOX to amp. (The Y-BOX v2.x and v3.0 Y-BOXs allow any DE-15 M/F non-VGA cable to be used instead of the Elecraft AUX cable). The easiest solution, if your electrician can snake a cable

Re: [Elecraft] K3 auto transmit - W7RIP

If you disabled Serial Enumeration and Modem Control at Startup, as shown by screenshots in this document: https://bit.ly/FTDItip but the rig still keys when you connect the USB cable or turn on the PC, then you may need to do it again, especially if the cable was moved to a different USB port

Re: [Elecraft] When is a Key Out not a Key Out

Elecraft and ACOM amplifiers have a jack labeled KEY IN, so connecting KEY OUT to KEY IN makes the most sense. Alpha and SPE amps call it a RELAY jack, but most rigs and some QSK amps don't use actual T/R relays any more. A few amps have a jack labeled PTT (RF Kit, Juma). If you connect a PTT

Re: [Elecraft] [Elecraft-K4] WANTED: AUX Cable Keyline interrupter

The Y-BOX version 2 and above also includes this feature to open the Pin 10 KEYOUT-LP line in the AUX cable, if needed. Just remove one internal jumper. 73, Bob, N6TV https://bit.ly/Y-BOX On Tue, Dec 21, 2021 at 12:57 PM David Reed wrote: > Attention users of the KPAK3AUX cable set, either

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

ngs – 100, 200, and 400. The K-Pod tuning > rate is half the rate of the K3/K3S. > > > > *73, Jim N7US* > > > > *From:* Bob Wilson, N6TV > *Sent:* Saturday, October 30, 2021 22:22 > *To:* j...@kk9a.com > *Cc:* Jim McDonald ; Elecraft Reflector < > elecraf

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

j...@n7us.net] > Sent: Friday, October 29, 2021 7:19 PM > To: Bob Wilson, N6TV; j...@kk9a.com; Elecraft Reflector > Subject: RE: [Elecraft] Elecraft K-Pod manual updated -- now covers use > with the K4 > > My K-Pod tune at half the rate of the K3S at all three VFO CTS settings. > >

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

On Fri, Oct 29, 2021 at 4:19 PM Jim McDonald wrote: > My K-Pod tune at half the rate of the K3S at all three VFO CTS settings. > Check again, because that does not match my experience if your K-POD firmware is at 1.09 (can't test now, sold both K3s). If CONFIG:VFO CTS is set to 100 (or 200?),

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

ept for the slow tuning. Too bad that the K3 > > firmware "cannot" reprogram it. > > > > John KK9A > > > > > > Bob Wilson, N6TV wrote: > > > > Yes, this only works with the K4. The K3 firmware cannot reprogram the > > K-POD encoder to match

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

On Thu, Oct 28, 2021 at 5:33 PM Jim McDonald wrote: > Does the selection of encoder rates only apply to the K4? > Yes, this only works with the K4. The K3 firmware cannot reprogram the K-POD encoder to match the K3's tuning rate. 73, Bob, N6TV

Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

On Thu, Oct 28, 2021 at 3:50 PM Rick Tavan wrote: > Right. The macros are stored in the radios, not in the K*Pod. You need to > run K3 Utility at the radio site to load them into the K3. The K4 has a > primitive text editor for on-screen macro entry, one finger typing with no > tactile

Re: [Elecraft] KPA1500 cyclic macros?

On Tue, Oct 26, 2021 at 8:43 PM eric norris via Elecraft < elecraft@mailman.qth.net> wrote: > There has been some discussion on the KX group reflector of cyclic macros > for the KX3. > My question is, would this work on the KPA1500? Could a single macro be > written for a PF key that would cycle

Re: [Elecraft] VGA cable to Elecraft amps

That's almost right. You cannot use a VGA cable with the Y-BOX or any Elecraft radio because they almost always short too many pins to ground.or to each other. A straight 15 pin M/F (non-VGA) extension would have worked OK to extend the Elecraft ACC cable. I supply these with the Y-BOX. I can

Re: [Elecraft] New K4 beta software available release 22

This will happen if K4 ACC Pin 8 (PWR ON) is being held to ground by incorrect cabling to external devices. Disconnect any cable from K4 ACC and the rig should power on and off and reboot itself properly. With proper cabling, no such disconnect is required to update the K4 firmware. 73, Bob,

Re: [Elecraft] K4 delivery status

On Mon, Aug 16, 2021 at 1:21 PM Fred Jensen wrote: > I haven't seen much K4 chatter here lately, I wonder how things are > going in the shipping/delivery business. Were I to order one today, when > could I expect to start tracking a package? > Skip et al, No one can answer this question,

Re: [Elecraft] K4 Key Out spec

Though not in the K4 manuals, the K4 KEY OUT jack (an RCA phono connector) has the same specs as the K3 KEY OUT jack: capable of keying up to +200VDC @ 5A. The K4 uses the same MOSFET as the K3, an IRFI630 (see datasheet ). Note that the

[Elecraft] Case-maker Rose's OM K0PP, SK

Retired case-maker Rose, N7HKW, and her OM Ken, K0PP, seemed like part of the Elecraft family for so many years. https://buttefuneralhome.com/obituaries/kenneth-glenn-kopp-age-83-of-anaconda-montana/?fbclid=IwAR2OvmrovnqFtcmHs2oMmg-lS8c3_YN27SilgKHGdpDz82MQpr5Lzq9d-VE Condolences to Rose and her

Re: [Elecraft] A Clarification: IC-7300 vs FTDX10

On Tue, Jun 8, 2021 at 4:01 PM Richard wrote: > Assuming you're a casual rawchewer and DXer, if you had an IC-7300 and an > FTDX10 side by side, where would they be pretty much equal, and where would > each outshine the other? > > Think in terms of using them with a KPA500 and a KAT500.

[Elecraft] Warning: Windows 10 Update resets FTDI options back to defaults, keys radio

I just installed a Windows 10 Update, and even before rebooting to complete the install, I noticed that Windows had reset all my Elecraft FTDI virtual COM port settings back to the (bad) FTDI defaults, which means your PC can key your radio about 7 or 8 times every time Windows restarts or the

Re: [Elecraft] Giving Up

Doug, You didn't mention what rig you are going to buy instead. Be sure to be aware of its limitations before you buy it. For example, the FTdx101MP has three show-stoppers (for a CW op like me), despite it's impressive numbers in the Sherwood table: - Poor QSK performance (the clicking

Re: [Elecraft] Receiving with Skimmer SDR on K-3 transmit antennas

I documented the procedure about 13 years ago in this presentation, linked at the very bottom of my QRZ.COM page , which includes the recommended Mini-Circuits 50 ohm splitter (ZFSC-2-6 ). - Adding a Software

Re: [Elecraft] KPA 1500 Remote input 13 broken

On Sun, May 9, 2021 at 3:15 PM Art Nienhouse wrote: > */I have been using my Icom 7610 for about two years driving my KPA1500 > amp via the Remote jack 13 on the rear. What is "Jack 13?" Do you mean the REMOTE (CI-V) jack on the IC-7610 (a 3.5mm phono connector), or the REM jack on the

Re: [Elecraft] Share a port for KPA500

I designed the S-BOX for just this type of serial port sharing. It passes all serial lines straight through from PC (normally) to Radio RS232, and taps the RXD line (Pin 2) for the KPA500, KAT500, SteppIR, etc. This works with POLL OFF as long as a logging program is polling the radio properly.

Re: [Elecraft] KPA500-KAT500 tuning settings

Andy, Kenwood rigs have master/slave menu options designed to enable one Kenwood rig to follow the frequency of another. The KAT500 manual recommends enabling these options, but I cannot confirm if they affect the frequency reported by the FA; command. If you have a null modem cable, can you

Re: [Elecraft] KPA500-KAT500 tuning settings

Though it works, best practice when using a K3 is to use AUX cables. The AUXBUS line (pin 2) in the AUX cable provides notification to the K3 as the amp switches from standby to operate, so drive power can be adjusted automatically AUXBUS also lets you use the band buttons on the KPA500 to

Re: [Elecraft] KPA500-KAT500 tuning settings

On Sun, May 9, 2021 at 9:33 AM Wes wrote: > This despite the claim: "The KAT500 Automatic Antenna Tuner is designed to > be > closely integrated with the Elecraft K3 transceiver and the Elecraft > KPA500 > amplifier although it may be easily used with other transceivers and > amplifiers." > >

Re: [Elecraft] KPA500-KAT500 tuning settings

On Sat, May 8, 2021 at 2:22 PM Andy Durbin wrote: > Having the KPA500 and KAT500 tune before transmit requires something to > send TX band data to KPA500 and TX frequency data to KAT500. Following > Kenwood FA is a weak (in my opinion hopelessly unsatisfactory) solution > since split operation

Re: [Elecraft] K3 (S) Weird Main RX issue

Does rotating the MAIN RF GAIN knob back and forth make any difference? Or tapping the ANT or RX ANT buttons a lot to exercise the antenna relays? I assume both receivers are listening to ANT1, and nothing is connected to AUX RF or RX ANT. What happens if you move the coax to ANT2? 73, Bob,

Re: [Elecraft] KPA500-KAT500 tuning settings

Steef, See this recent post for explanation: http://mailman.qth.net/pipermail/elecraft/2021-April/284736.html. The KAT500 can auto-track any Kenwood or Kenwood-compatible rig that outputs frequency data in the format: "FA00014025000;". Connect the RS232 RXD line (Pin 2) of the Kenwood rig to

Re: [Elecraft] [K4FT] K4 software release 13

My bad. Sent to wrong reflector. This was for field testers. Sorry. 73, Bob, N6TV On Mon, May 3, 2021, 6:59 PM David Box wrote: > Is there a release 13 available, I am not seeing it when I do an update > check. > > de Dave K5MWR K4D SN0078 > > > On 5/3/2021 20:24, B

Re: [Elecraft] [K4FT] K4 software release 13

Installs fine. I like the new spectrum overlay. Glad you fixed the AM / FM TX freq. bug. Will close that one. 73, Bob, N6TV On Mon, May 3, 2021 at 2:16 PM Wayne Burdick wrote: > Hi all, > > Please load and test the latest. See below. > > tnx > Wayne > > > * * * * * > > > K4 SOFTWARE

Re: [Elecraft] K4 interface to KPA-1500

t;KPA500 Status: standby" to "KPA1500 Status: ..." automatically. 73, Bob, N6TV On Fri, Apr 30, 2021, 3:50 PM Alan - G4GNX wrote: > Is there an update to the KPA500 firmware that reflects the K4? > > 73, > > Alan. G4GNX > > > -- Original Message -- &

Re: [Elecraft] K4 interface to KPA-1500

Also be sure to set RADIO TYPE to K4 in the KPA1500 menu. If you don't see it listed, upgrade the KPA1500 firmware. 73, Bob, N6TV On Thu, Apr 29, 2021, 9:16 PM James F. Boehner, MD via Elecraft < elecraft@mailman.qth.net> wrote: > Is there information anywhere on how to interface the K4 to a

Re: [Elecraft] K4 interface to KPA-1500

Yes, identical AUX cable (and/or Y-BOX) works fine. TX Sample is not yet implemented (could be a while). I recommend leaving that connector unused until further notice. 73, Bob, N6TV https://bit.ly/Y-BOX On Thu, Apr 29, 2021, 9:16 PM James F. Boehner, MD via Elecraft <

Re: [Elecraft] [K3] RTTY Questions

On Thu, Apr 29, 2021, 8:20 PM John Reilly wrote: > I have two K3 questions: > 1. In Data MD, AFSk A, you can set the baud rate to either 45 or 75. > Is the baud rate just for the RTTY reader? Yes Does it affect anything else? > No. 2. With my K3s power set to 100w, RTTY starts at a

Re: [Elecraft] K3/KPA500 question

On Tue, Apr 27, 2021 at 8:34 PM Andy Durbin wrote: > "It's not clear why this feature of the KPA500 is a "PITA," since the > majority of users want the rig and the amp. to always be locked to the same > band. " > > And that is exactly why the band buttons are a PITA - If pressed they > would

Re: [Elecraft] K3/KPA500 question

power settings (one for amp in OPER and a second for amp in STBY). 73, Bob, N6TV On Tue, Apr 27, 2021 at 8:19 PM Bob Wilson, N6TV wrote: > It's not clear why this feature of the KPA500 is a "PITA," since the > majority of users want the rig and the amp. to always be locked to

Re: [Elecraft] K3/KPA500 question

It's not clear why this feature of the KPA500 is a "PITA," since the majority of users want the rig and the amp. to always be locked to the same band. However, I suppose it could be a problem in a station where antenna switching is all manual rather than automatic. In that case, one can change

Re: [Elecraft] K3/KPA500 question

Does your automatic antenna switch use the Unified Microsystems BCD-10 or BCD-14 band decoders, or is your design similar to the 4O3A Antenna Genius? These products all use opto-Isolators on the four Band Data lines in the AUX cable. Wiring this type of decoder in parallel with the

Re: [Elecraft] Connecting PC to K3S

On Sun, Jan 24, 2021 at 6:05 PM NJMike wrote: > One thing is the connection from my laptop to the K3S. The laptop has 2 > USB > ports. One USB port is used with a wireless keyboard. The other USB port > is connected to a 4-port hub. From the hub, one port goes to a Winkeyer. > Another port

[Elecraft] You probably do not need a K4HD for SO2R contesting

Old Subject line was: "K4 Panadapter Display" This is in response to the post by NJ8M, excerpted below. I've been testing a pair of K4D (not HD) radios for SO2R (Single Op Two Radio) contesting at my QTH, which has one tower, closely-spaced monoband antennas, and 1500W output. I'm using Array

Re: [Elecraft] DB15HD cable sopurce

This appears is the same Amphenol cable that I supply with my devices, for $12 ea. if purchased with S-BOX or Y-BOX ($10 for a 2.5-ft version). I also have a few longer ones. However, the link points to a M/F cable, which works from my Y-BOX v2.x or v3.x to AMP AUX, but should never be connected

Re: [Elecraft] How to download firmware into K4

On Thu, Jan 14, 2021 at 4:24 PM Tim Tucker wrote: > I plan to buy one of these to interface the K4 ethernet to my home Wifi: > > > https://www.amazon.com/IOGEAR-Ethernet-2-WiFi-Universal-Wireless-GWU637/dp/B018YPWORE That will probably work fine once programmed to connect to your WiFi Router.

Re: [Elecraft] K4 controlled by K3?

On Tue, Jan 12, 2021, 3:15 PM weave...@usermail.com wrote: Can the K3 (K3/0) control the K4 remotely? No, because the interface is too different. A K4/0 is expected to provide this capability. 73, Bob, N6TV __ Elecraft mailing list

Re: [Elecraft] How to download firmware into K4

Yes, you connect the K4 Ethernet port to your Router or Ethernet switch, then software updates may be downloaded on demand direct from the Internet by tapping Fn > UPDATE and following the prompts. 73, Bob, N6TV K4 Field Tester On Tue, Jan 12, 2021, 2:19 PM Joseph Trombino, Jr wrote: > Howdy

Re: [Elecraft] N6TV S-Box and Y-Box

Thank you very much Eric, A collection of PDF files with block diagrams and schematics detailing the custom S-BOX and Y-BOX design that I came up with so that WD6DBM could connect any one of these: K2/100 K3 + 3 transveters K4 KX2 KX3 with any one of these KAT500 / KPA500 KPA1500 using

Re: [Elecraft] USB monitor issue?

There's a special setting only documented in the K3 Firmware Release Notes as follows: * TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to the RX LINE OUT setting. So if you go to

Re: [Elecraft] K3 shortening CW dits

That was supposed to say *CONFIG:PTT-KEY RTS-DTR*. 73, Bob, N6TV On Mon, Dec 7, 2020 at 4:05 PM Bob Wilson, N6TV wrote: > I posted various solutions to the K3 element shortening issue about 7 > years ago. See this link on my QRZ.COM page <https://qrz.com/db/n6tv>: > >

Re: [Elecraft] K3 shortening CW dits

I posted various solutions to the K3 element shortening issue about 7 years ago. See this link on my QRZ.COM page : - How to get clean fast CW from an Elecraft K3 without using CW QRQ mode (post

Re: Missing argument in org-reset-checkbox-state-subtree?

with a call to: (org-map-entries ‘org-update-parent-todo-statistics) and this seems to address my problem as well, but definitely more elegantly! Kind regards, Bob > On Nov 11, 2020, at 7:22 PM, Kyle Meyer wrote: > > Bob Wilson writes: > >> I’m writing about a possible b

Re: Missing argument in org-reset-checkbox-state-subtree?

The first line shows the problem: the statistics cookies have updated to [0/0]. For what it’s worth, my “fix” may be the wrong fix, but it does solve the problem! So if anyone else runs into the same problem, I hope my horrible elisp debugging is mildly helpful! Kind regards, Bob Wilson >

Missing argument in org-reset-checkbox-state-subtree?

missing something. Is the current implementation intentional? Kind regards, Bob Wilson

Re: [Elecraft] KPA1500 / K3 Mystery

Bruce, What is the firmware version of your KPA1500? 2.48 is the latest. There was also a change in version 2.38, almost a year ago, that could fix the issue for you: 02.38 11/4/2019 (Production 12/3/2019) ⦁ Switch to STBY if BAND CHANGE->STBY is enabled and the frequency (from XCVR or TX

[Elecraft] New K4 FT software testing

Sincerely apologies. That was supposed to be a private message to a different reflector. No further comments on this please. 73, Bob, N6TV > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [K4FT] New K4 FT software testing

On Sat, Oct 17, 2020 at 1:48 PM Dick Dievendorff wrote: > KUP2 reset to factory defaults doesn’t have an “Are You Sure” confirmation > popup. > Please add it. This will avoid many angry phone calls to support and huge flames on the Internet. > Neither do any of the other buttons on the

Re: [Elecraft] [K4] What is the maximum resolution supported by the K4 HDMI output?

Last January they said "Up to 4K" See http://elecraft.365791.n2.nabble.com/K4-Internal-and-External-display-resolution-connector-td7657770.html 73, Bob, N6TV On Tue, Oct 13, 2020 at 10:29 AM Michael Rosenberg < mikerosenb...@hotmail.com> wrote: > As in the title, what is the maximum screen

Re: [Elecraft] KPA500 REMOTE POWER CONTROL

KPA500 AUX Pin 12 is GND. AUX Pin 8 is the KPA500 remote power ON/OFF pin. No webswitch is necessary to remotely power the KPA500 on and off, since this can be done quite easily from a button on the K3 itself, using a macro, as described here:

Re: [Elecraft] P3 info

I recommend checking the P3 Manual for the correct hookup. You can either use the optional CBLP3Y cable (a separate purchase) or the RJ-45 to DE9-F adapter cable that is supplied with every K3S. If using the latter, you have to change CONFIG:RS232 to 38400 (not USB), and the USB cable can only

Re: [Elecraft] KPA1500 firmware 2.48 beta available

Correct link is: https://elecraft.com/pages/kpa1500-1500-watt-linear-amplifier-firmware-and-utility I used this version during CQP on two KPA1500s and had zero issues. 73, Bob, N6TV On Wed, Oct 7, 2020 at 9:43 AM Dick Dievendorff wrote: > We've made a new KPA1500 Beta firmware revision

Re: Links in complete org-todo-keyword-face not highlighted

Thanks Kyle! Worked like a charm! Kind regards, Bob > On Sep 30, 2020, at 5:30 PM, Kyle Meyer wrote: > > Bob Wilson writes: > >> I often put links in TODOs, but it would appear that in org 9.4, >> marking a task complete changes the font of the entire te

Links in complete org-todo-keyword-face not highlighted

equivalent to ignoring the init.el file, but I guess not! I tried searching the mailing list to see if this has been discussed previously but didn’t see anything. Any help would be appreciated! Kind regards, Bob Wilson

Re: [Elecraft] Does the K4 support IPv6?

our router may supply it to your lan, but your provider may not utilize > it yet. > > Rick NK7I > > > On 9/27/2020 11:41 PM, Bob Wilson, N6TV wrote: > > I'm not sure what you mean by "support IPv6". > > > > From a Windows command prompt, I tried a *pin

Re: [Elecraft] Does the K4 support IPv6?

I'm not sure what you mean by "support IPv6". >From a Windows command prompt, I tried a *ping -6* command with the radio's IPv6 address, to force IPv6 addressing, and it responded just fine. But it sure is easier to type the radios IPv4 address, which the rig displays in the menu. It doesn't

Re: [Elecraft] KX3 and Chinese MX-P50M 45w amp

On Thu, Sep 24, 2020 at 7:52 PM MIKE ZANE wrote: > Need a little help. I just bought a KX3 and have it working OK. I also > have a 45w amp that I would like to work with the kx3. However, with no > info on the keying line coming from the amp, I have no idea if its Ok to > use. See

bug#43606: [SPAM] [IceDove]: Preferences does not open

Probably spam. Closing.

Re: [Elecraft] No Tx audio after WSJT upgrade

Most likely causes of no TX Audio in a K3S with WSJT-X: 1. Any connector or cable inserted into the K3S 3.5mm LINE IN jack will override (and completely MUTE) the USB Audio CODEC input 2. USB Audio CODEC "Speakers" level got reset to 0 by Windows 3. MAIN:MIC SEL for DATA mode is not

Re: [Elecraft] Status of Add-ons for K3?

Please complete the K3/K3S Options Pre-Order Interest Form . Elecraft can't justify new production of these K3 boards until there is sufficient demand, as indicated by entries on the form (not by posts to this reflector).

Re: [Elecraft] K3 Audio from RS232 connection?

On Thu, Sep 17, 2020 at 10:31 AM Bob KD7YZ wrote: > When I ran up WSJT-X and was attempting to connect, I noticed No Audio. > > How do I get digital audio? I gather it's NOT thru the KIO3b RJ-45 . > If the USB cable is disconnected from the K3S, the USB Sound Card (USB Audio CODEC) will no

Re: [Elecraft] KPA-1500/FlexRadio 6400

Hi Mike, This seems to be a duplicate post (see http://elecraft.365791.n2.nabble.com/KPA-1500-FlexRadio-6400-td7665007.html), though I'm not sure if your questions were fully answered the first time. First, to search the archives of this reflector, go to

RE: [DOG mailing list] Nigel Update

Cath, Please pass on my best wishes to Nigel I have no doubt he will handle chemo well. Regards Bob Wilson -Original Message- From: dog@lists.riverland.net.au [mailto:dog@lists.riverland.net.au] On Behalf Of Catherine Conway Sent: Thursday, 17 September 2020 12:00 PM To: dog

Re: [Elecraft] WTB: KVR3 digital voice recorder for K3

Please have your friend check *KDVR3 Digital Voice Recorder* indicate *quantity 3* in the box at the bottom of the Elecraft K3/K3S Options Interest Form: https://elecraft.com/pages/k3-k3s-options-interest-form Many other currently-unavailable K3/K3S options / upgrades are listed there too, such

Re: [Elecraft] CW Sidetone and Line Out?

There's a special setting only documented in the K3 Firmware Release Notes as follows: * TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to return to

Re: [Elecraft] K4 Questions

On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar wrote: > is the pan presentation fixed as to frequency span or can the frequency > span be adjusted; I typically use 25-50 KHz on CW or > less on data modes. Span and center frequency are adjustable. Fixed or tracking mode is available. Scrolling

[Elecraft] WA6HHQ Update on Elecraft K4 SDR begins in 8 minutes at QSO Today Ham Expo

https://qsotoday.vfairs.com/en/hall# Select Track 4. A live Q session via Zoom link should appear at the end of the presentation. Recording should be available if you miss it. 73, Bob, N6TV __ Elecraft mailing list Home:

Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

Joe, A single cable can work, but it may not be the ideal solution for the long run, should your equipment expand or change. Instead of a custom K3 to SPE cable, consider an alternative that will allow stock cables to work, no matter which radio or amplifier you want to connect. I designed the

Re: [Elecraft] That's a whole lotta buttons and knobs!

IMHO, both the RIT/XIT knob and RIT clear button in the Kenwood ST-995sdr image are poorly located. I wouldn't recommend this radio for "big gun contesting" unless they offered an outboard RIT knob with an RIT clear button, like the Elecraft K-POD, or the old Ekletech outboard tuning knob (made

Re: [Elecraft] [K3s] SteppIR Control

Hi John, If you have *CONFIG: RS-232* set to *USB*, then both K3 serial ports are fixed at 38400 baud, so you have to use that setting in the SteppIR controller, and set the radio type to Elecraft (or Kenwood). A custom cable is required to allow the SteppIR auto-track to work via the K3 9-pin

Re: [Elecraft] Cable for K3 to Ameritron ALS-1300/ARI-500

NEVER connect an SVGA cable to an Elecraft ACC/AUX port, unless you have a way to test every single pin. Many of these cables short all the "ground" pins together (there are 5 of them), or omit Pin 9 (K3 Band2 OUT), so they won't work at all and could cause damage. 73, Bob, N6TV On Wed, Jul 29,

Re: [Elecraft] P3 screen grab COM port conflict.

On Wed, Jul 22, 2020 at 2:53 PM HP wrote: > Is there a way to use the P3 utility image grabs -while connected to the > K3S using the > USB to computer - then the CBLP3Y RJ-45 to DE9s and DE9P Y adapter Yes. Just connect the P3 Utility to the K3 virtual serial port. > while using N1MM

[Elecraft] Connecting KX3 or K2 to KPA1500 (or KPA500)

On Wed, Jul 22, 2020 at 7:51 PM eric norris via Elecraft < elecraft@mailman.qth.net> wrote: > 2) Does anyone offer a KX3 to KPA1500 serial cable, and a K2 to KPA1500 > serial cable for sale? No, I can no longer build them myself, even though > they are simple. > My Serial Box (S-BOX

Re: [Elecraft] K4 and RTTY question

On Mon, Jul 20, 2020 at 7:03 AM Joe DeVincentis wrote: > Personally, I'd like to see the K4 support something like the TinyFSK > protocol for doing RTTY. > There's really no urgent reason to do this once the KY host command is improved to allow message stacking with interrupt capability. If

RE: [DOG mailing list] Cooling airflow and Mixture relationship

Rob, We recently did a lot of research to prove or disprove the cooling rate/performance on a new engine install in a Taifun 17E2. The engine is a Rotax 914. Replacing a Limbach 2400. Our manometer was in fact an ASI using the pitot side on the high pressure side and the static on the low

Re: [Elecraft] K4 and RTTY question

Bill, Before it can be "fixed" in the K4, the logging software has to be fixed to send the proper KY command. If it is sending KY*somes-string*;, then the messages are not going to be chained. If it is sending KYW *some-string*;, then the messages should be properly chained, perhaps with a very

Re: [Elecraft] CW Mush

See also http://elecraft.365791.n2.nabble.com/K3-Receiver-mush-td7627277.html#a7627323 73, Bob, N6TV On Thu, Jul 2, 2020, 2:34 PM Peter Chamalian wrote: > My K3S is turning CW into mush. Huge pile ups as K2D are really hard to > deal with. Any suggestions other than get a K4 which I have on

Re: [Elecraft] K4 on Digital Modes

On Sat, Jun 27, 2020 at 8:14 AM Gus Holcomb wrote: > With the K4D, for instance, what interfaces are presented on the computer > and how many of them are there? To review, on a K3S or K3+KIO3B with USB connector, you get one virtual serial port and one USB Sound Card (USB AUDIO CODEC).

Re: [Elecraft] N6TV recording K4 K3

On Fri, Jun 26, 2020 at 6:24 AM wrote: > I know that your post said to ignore the transmissions but why is it > so bad? 1500W. Shack is right below the antenna. Analog connection to microHAM MK2R+ sound card (others have commented they had similar problems keeping RF out of this device).

Re: [Elecraft] N6TV recording K4 K3

Hi Doug, I've been doing CW contests with the K3 for nearly 11 years now. After using an early release of the K4 firmware, which should only improve over time, I'm convinced that the K4 far outperforms the K3 in CW pileup scenarios, mainly due to much improved audio performance. I predict other

Re: [Elecraft] New CW audio recording: K3 vs. K4D

rences and that may very well be what I'm hearing. > > John K7FD > > On Jun 24, 2020, at 8:42 PM, Bob Wilson, N6TV wrote: > > On Wed, Jun 24, 2020 at 8:33 PM Macy monkeys > wrote: > >> Overall, the K3 sounded a little smoother to my ears. I do not own a K3 >> nor

Re: [Elecraft] New CW audio recording: K3 vs. K4D

On Wed, Jun 24, 2020 at 8:33 PM Macy monkeys wrote: > Overall, the K3 sounded a little smoother to my ears. I do not own a K3 > nor have I ordered a K4. But I would be happy with either one! > Please define "smoother". I prefer the K4 audio. Note that the recording starts with K3 audio. 73,

  1   2   3   4   5   6   7   8   9   >